You are not logged in.

#1 2016-06-19 17:47:37

numb3rz
Member
Registered: 2016-06-14
Posts: 24

(EE) Screen 0 deleted because of no matching config section.

Hello,

I am unable to start KDE as whenever I attempt to start it with SDDM, X throws the exception in the title. Though there does not seem to be much information on the issue, is there another configuration file this looks at? As I am pretty sure I've made the "Screen 0" config section in the /etc/X11/xorg.conf file.

/var/log/Xorg.0.log

[  1977.120] (--) Log file renamed from "/var/log/Xorg.pid-485.log" to "/var/log/Xorg.0.log"
[  1977.122] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[  1977.122] X Protocol Version 11, Revision 0
[  1977.122] Build Operating System: Linux 4.5.1-1-ARCH x86_64 
[  1977.122] Current Operating System: Linux optimus 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64
[  1977.122] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=62f06e40-666b-42a5-bd32-c7ca670ac247 rw quiet
[  1977.122] Build Date: 03 June 2016  07:28:24AM
[  1977.122]  
[  1977.122] Current version of pixman: 0.34.0
[  1977.122] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[  1977.122] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1977.122] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 19 18:38:02 2016
[  1977.125] (==) Using config file: "/etc/X11/xorg.conf"
[  1977.125] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1977.127] (==) ServerLayout "Default Layout"
[  1977.127] (**) |-->Screen "Screen 0" (0)
[  1977.127] (**) |   |-->Monitor "<default monitor>"
[  1977.127] (**) |   |-->Device "nvidia"
[  1977.127] (**) |   |-->GPUDevice "intel"
[  1977.127] (==) No monitor specified for screen "Screen 0".
	Using a default monitor configuration.
[  1977.127] (**) |-->Input Device "Keyboard0"
[  1977.127] (**) |-->Input Device "Mouse0"
[  1977.127] (==) Automatically adding devices
[  1977.127] (==) Automatically enabling devices
[  1977.127] (==) Automatically adding GPU devices
[  1977.127] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1977.129] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1977.129] 	Entry deleted from font path.
[  1977.132] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[  1977.132] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1977.132] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1977.132] (WW) Disabling Keyboard0
[  1977.132] (WW) Disabling Mouse0
[  1977.132] (II) Loader magic: 0x821d20
[  1977.132] (II) Module ABI versions:
[  1977.132] 	X.Org ANSI C Emulation: 0.4
[  1977.132] 	X.Org Video Driver: 20.0
[  1977.132] 	X.Org XInput driver : 22.1
[  1977.132] 	X.Org Server Extension : 9.0
[  1977.134] (++) using VT number 1

[  1977.134] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1977.134] (II) xfree86: Adding drm device (/dev/dri/card1)
[  1977.135] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1977.138] (--) PCI:*(0:0:2:0) 8086:191b:1043:1d6d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[  1977.138] (--) PCI: (0:1:0:0) 10de:139b:1043:1d6d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  1977.138] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1977.138] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  1977.138] (II) LoadModule: "modesetting"
[  1977.140] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1977.141] (II) Module modesetting: vendor="X.Org Foundation"
[  1977.141] 	compiled for 1.18.3, module version = 1.18.3
[  1977.141] 	Module class: X.Org Video Driver
[  1977.141] 	ABI class: X.Org Video Driver, version 20.0
[  1977.141] (II) LoadModule: "glx"
[  1977.141] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1977.195] (II) Module glx: vendor="NVIDIA Corporation"
[  1977.195] 	compiled for 4.0.2, module version = 1.0.0
[  1977.195] 	Module class: X.Org Server Extension
[  1977.196] (II) NVIDIA GLX Module  367.27  Thu Jun  9 18:19:55 PDT 2016
[  1977.197] (II) LoadModule: "nvidia"
[  1977.197] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1977.203] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1977.203] 	compiled for 4.0.2, module version = 1.0.0
[  1977.203] 	Module class: X.Org Video Driver
[  1977.204] (II) LoadModule: "modesetting"
[  1977.204] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1977.204] (II) Module modesetting: vendor="X.Org Foundation"
[  1977.204] 	compiled for 1.18.3, module version = 1.18.3
[  1977.204] 	Module class: X.Org Video Driver
[  1977.204] 	ABI class: X.Org Video Driver, version 20.0
[  1977.204] (II) UnloadModule: "modesetting"
[  1977.204] (II) Unloading modesetting
[  1977.204] (II) Failed to load module "modesetting" (already loaded, 0)
[  1977.204] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1977.204] (II) NVIDIA dlloader X Driver  367.27  Thu Jun  9 17:57:30 PDT 2016
[  1977.204] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1977.205] (II) modeset(0): using drv /dev/dri/card0
[  1977.206] (II) Loading sub module "fb"
[  1977.206] (II) LoadModule: "fb"
[  1977.206] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1977.207] (II) Module fb: vendor="X.Org Foundation"
[  1977.207] 	compiled for 1.18.3, module version = 1.0.0
[  1977.207] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1977.207] (II) Loading sub module "wfb"
[  1977.207] (II) LoadModule: "wfb"
[  1977.207] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1977.209] (II) Module wfb: vendor="X.Org Foundation"
[  1977.209] 	compiled for 1.18.3, module version = 1.0.0
[  1977.209] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1977.209] (II) Loading sub module "ramdac"
[  1977.209] (II) LoadModule: "ramdac"
[  1977.209] (II) Module "ramdac" already built-in
[  1977.211] (EE) Screen 0 deleted because of no matching config section.
[  1977.211] (II) UnloadModule: "modesetting"
[  1977.211] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  1977.211] (==) NVIDIA(0): RGB weight 888
[  1977.211] (==) NVIDIA(0): Default visual is TrueColor
[  1977.211] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1977.212] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[  1977.212] (**) NVIDIA(0): Enabling 2D acceleration
[  1977.438] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960M (GM107-A) at PCI:1:0:0 (GPU-0)
[  1977.438] (--) NVIDIA(0): Memory: 2097152 kBytes
[  1977.438] (--) NVIDIA(0): VideoBIOS: 82.07.94.00.0d
[  1977.438] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1977.438] (II) NVIDIA(0): Validated MetaModes:
[  1977.438] (II) NVIDIA(0):     "NULL"
[  1977.438] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[  1977.438] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[  1977.438] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  1977.438] (--) Depth 24 pixmap format is 32 bpp
[  1977.439] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[  1977.439] (II) NVIDIA:     access.
[  1977.442] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1977.442] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1977.442] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1977.442] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1977.442] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1977.442] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1977.442] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1977.442] (II) NVIDIA(0):     Config Options in the README.
[  1977.459] (II) NVIDIA(0): Setting mode "NULL"
[  1977.466] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1977.466] (==) NVIDIA(0): Backing store enabled
[  1977.466] (==) NVIDIA(0): Silken mouse enabled
[  1977.466] (==) NVIDIA(0): DPMS enabled
[  1977.467] (II) Loading sub module "dri2"
[  1977.467] (II) LoadModule: "dri2"
[  1977.467] (II) Module "dri2" already built-in
[  1977.467] (II) NVIDIA(0): [DRI2] Setup complete
[  1977.467] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1977.467] (--) RandR disabled
[  1977.470] (II) Initializing extension GLX
[  1977.470] (II) Indirect GLX disabled.
[  1977.548] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1977.548] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1977.548] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1977.548] (II) LoadModule: "libinput"
[  1977.548] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1977.557] (II) Module libinput: vendor="X.Org Foundation"
[  1977.557] 	compiled for 1.18.3, module version = 0.19.0
[  1977.557] 	Module class: X.Org XInput Driver
[  1977.557] 	ABI class: X.Org XInput driver, version 22.1
[  1977.557] (II) Using input driver 'libinput' for 'Power Button'
[  1977.558] (**) Power Button: always reports core events
[  1977.558] (**) Option "Device" "/dev/input/event3"
[  1977.558] (**) Option "_source" "server/udev"
[  1977.558] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  1977.558] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  1977.576] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  1977.576] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1977.577] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[  1977.577] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[  1977.577] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[  1977.577] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[  1977.577] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[  1977.577] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[  1977.577] (**) Asus Wireless Radio Control: always reports core events
[  1977.577] (**) Option "Device" "/dev/input/event4"
[  1977.577] (**) Option "_source" "server/udev"
[  1977.577] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  1977.577] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  1977.589] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4/event4"
[  1977.590] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[  1977.590] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[  1977.590] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[  1977.590] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[  1977.590] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1977.590] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1977.590] (II) Using input driver 'libinput' for 'Video Bus'
[  1977.590] (**) Video Bus: always reports core events
[  1977.590] (**) Option "Device" "/dev/input/event8"
[  1977.590] (**) Option "_source" "server/udev"
[  1977.590] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[  1977.590] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[  1977.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event8"
[  1977.603] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  1977.603] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[  1977.603] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[  1977.604] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[  1977.604] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1977.604] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1977.604] (II) Using input driver 'libinput' for 'Video Bus'
[  1977.604] (**) Video Bus: always reports core events
[  1977.604] (**) Option "Device" "/dev/input/event9"
[  1977.604] (**) Option "_source" "server/udev"
[  1977.604] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[  1977.604] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[  1977.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9/event9"
[  1977.616] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[  1977.617] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[  1977.617] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[  1977.618] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1977.618] (II) No input driver specified, ignoring this device.
[  1977.618] (II) This device may have been added with another device file.
[  1977.618] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  1977.618] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1977.618] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1977.618] (II) Using input driver 'libinput' for 'Sleep Button'
[  1977.618] (**) Sleep Button: always reports core events
[  1977.618] (**) Option "Device" "/dev/input/event2"
[  1977.618] (**) Option "_source" "server/udev"
[  1977.619] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  1977.619] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  1977.629] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[  1977.630] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[  1977.630] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[  1977.630] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[  1977.632] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[  1977.632] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[  1977.632] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[  1977.632] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[  1977.632] (**) USB2.0 HD UVC WebCam: always reports core events
[  1977.632] (**) Option "Device" "/dev/input/event6"
[  1977.632] (**) Option "_source" "server/udev"
[  1977.633] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is tagged by udev as: Keyboard
[  1977.633] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is a keyboard
[  1977.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input6/event6"
[  1977.663] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 11)
[  1977.664] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is tagged by udev as: Keyboard
[  1977.664] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is a keyboard
[  1977.665] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event10)
[  1977.665] (**) Elan Touchpad: Applying InputClass "evdev touchpad catchall"
[  1977.665] (**) Elan Touchpad: Applying InputClass "evdev touchscreen catchall"
[  1977.665] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[  1977.665] (**) Elan Touchpad: Applying InputClass "libinput touchscreen catchall"
[  1977.665] (**) Elan Touchpad: Applying InputClass "touchpad catchall"
[  1977.665] (**) Elan Touchpad: Applying InputClass "Default clickpad buttons"
[  1977.665] (II) LoadModule: "synaptics"
[  1977.665] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  1977.667] (II) Module synaptics: vendor="X.Org Foundation"
[  1977.667] 	compiled for 1.18.3, module version = 1.8.99
[  1977.667] 	Module class: X.Org XInput Driver
[  1977.667] 	ABI class: X.Org XInput driver, version 22.1
[  1977.667] (II) Using input driver 'synaptics' for 'Elan Touchpad'
[  1977.667] (**) Elan Touchpad: always reports core events
[  1977.667] (**) Option "Device" "/dev/input/event10"
[  1977.696] (II) synaptics: Elan Touchpad: found clickpad property
[  1977.696] (--) synaptics: Elan Touchpad: x-axis range 0 - 3097 (res 32)
[  1977.696] (--) synaptics: Elan Touchpad: y-axis range 0 - 2119 (res 33)
[  1977.696] (--) synaptics: Elan Touchpad: pressure range 0 - 255
[  1977.696] (--) synaptics: Elan Touchpad: finger width range 0 - 15
[  1977.696] (--) synaptics: Elan Touchpad: buttons: left double triple
[  1977.696] (--) synaptics: Elan Touchpad: Vendor 0x4f3 Product 0x5
[  1977.696] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[  1977.697] (--) synaptics: Elan Touchpad: touchpad found
[  1977.697] (**) Elan Touchpad: always reports core events
[  1977.723] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1000:00/input/input10/event10"
[  1977.723] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 12)
[  1977.723] (**) synaptics: Elan Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[  1977.723] (**) synaptics: Elan Touchpad: (accel) MaxSpeed is now 1.75
[  1977.723] (**) synaptics: Elan Touchpad: (accel) AccelFactor is now 0.053
[  1977.723] (**) Elan Touchpad: (accel) keeping acceleration scheme 1
[  1977.723] (**) Elan Touchpad: (accel) acceleration profile 1
[  1977.723] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[  1977.723] (**) Elan Touchpad: (accel) acceleration threshold: 4
[  1977.723] (--) synaptics: Elan Touchpad: touchpad found
[  1977.724] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse0)
[  1977.724] (**) Elan Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1977.725] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[  1977.725] (II) No input driver specified, ignoring this device.
[  1977.725] (II) This device may have been added with another device file.
[  1977.725] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[  1977.725] (II) No input driver specified, ignoring this device.
[  1977.725] (II) This device may have been added with another device file.
[  1977.726] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[  1977.726] (II) No input driver specified, ignoring this device.
[  1977.726] (II) This device may have been added with another device file.
[  1977.726] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[  1977.726] (II) No input driver specified, ignoring this device.
[  1977.726] (II) This device may have been added with another device file.
[  1977.727] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[  1977.727] (II) No input driver specified, ignoring this device.
[  1977.727] (II) This device may have been added with another device file.
[  1977.727] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[  1977.727] (II) No input driver specified, ignoring this device.
[  1977.727] (II) This device may have been added with another device file.
[  1977.728] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[  1977.728] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1977.728] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1977.728] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[  1977.728] (**) Asus WMI hotkeys: always reports core events
[  1977.728] (**) Option "Device" "/dev/input/event7"
[  1977.728] (**) Option "_source" "server/udev"
[  1977.728] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[  1977.728] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is a keyboard
[  1977.743] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event7"
[  1977.743] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[  1977.744] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[  1977.744] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is a keyboard
[  1977.744] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1977.745] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1977.745] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1977.745] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1977.745] (**) AT Translated Set 2 keyboard: always reports core events
[  1977.745] (**) Option "Device" "/dev/input/event0"
[  1977.745] (**) Option "_source" "server/udev"
[  1977.745] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  1977.745] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  1977.769] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1977.770] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[  1977.770] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[  1977.770] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[  1977.771] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  1977.771] (II) No input driver specified, ignoring this device.
[  1977.771] (II) This device may have been added with another device file.
[  2005.154] (II) UnloadModule: "libinput"
[  2005.154] (II) UnloadModule: "libinput"
[  2005.155] (II) UnloadModule: "synaptics"
[  2005.155] (II) UnloadModule: "libinput"
[  2005.155] (II) UnloadModule: "libinput"
[  2005.155] (II) UnloadModule: "libinput"
[  2005.155] (II) UnloadModule: "libinput"
[  2005.155] (II) UnloadModule: "libinput"
[  2005.155] (II) UnloadModule: "libinput"
[  2005.181] (II) NVIDIA(GPU-0): Deleting GPU-0
[  2005.185] (II) Server terminated successfully (0). Closing log file.

/etc/X11/xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 367.27  (buildmeister@swio-display-x64-rhel04-12)  Thu Jun  9 19:24:36 PDT 2016

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Screen 0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Module"
    Load           "modesetting"
    Load           "glx"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Device"
    Identifier     "nvidia"
    Driver         "nvidia"
    BusID "1:0:0"
    #Option "AllowEmptyConfiguration"
    Screen 0
EndSection

Section "Device"
    #Option        "Tiling" "True"
    #Option        "SwapbuffersWait" "True"
    Identifier     "intel"
    Driver         "modesetting"
    Option         "AccelMethod" "sna"
    #Option        "TearFree" "True"
    BusID          "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier     "Screen 0"
    Device         "nvidia"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection

Thanks!

Offline

#2 2016-06-19 19:08:17

Slithery
Forum Moderator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 3,507

Re: (EE) Screen 0 deleted because of no matching config section.

Does it work without an xorg.conf?


No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#3 2016-06-20 13:45:24

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Re: (EE) Screen 0 deleted because of no matching config section.

I am specifying the xorg.conf so my Nvidia GPU actually gets used and am trying to use the Nvidia Optimus approach. Anyway, it seems the screen still does not come on even without defining the xorg.conf file, here is the log for it:

/var/log/Xorg.0.log

[    53.695] (--) Log file renamed from "/var/log/Xorg.pid-471.log" to "/var/log/Xorg.0.log"
[    53.699] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[    53.699] X Protocol Version 11, Revision 0
[    53.699] Build Operating System: Linux 4.5.1-1-ARCH x86_64 
[    53.699] Current Operating System: Linux optimus 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64
[    53.699] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=62f06e40-666b-42a5-bd32-c7ca670ac247 rw quiet
[    53.699] Build Date: 03 June 2016  07:28:24AM
[    53.699]  
[    53.699] Current version of pixman: 0.34.0
[    53.699] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    53.699] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    53.699] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 20 14:38:21 2016
[    53.703] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    53.705] (==) No Layout section.  Using the first Screen section.
[    53.705] (==) No screen section available. Using defaults.
[    53.705] (**) |-->Screen "Default Screen Section" (0)
[    53.705] (**) |   |-->Monitor "<default monitor>"
[    53.706] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    53.706] (==) Automatically adding devices
[    53.706] (==) Automatically enabling devices
[    53.706] (==) Automatically adding GPU devices
[    53.706] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    53.707] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    53.707] 	Entry deleted from font path.
[    53.710] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    53.710] (==) ModulePath set to "/usr/lib/xorg/modules"
[    53.710] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    53.711] (II) Loader magic: 0x821d20
[    53.711] (II) Module ABI versions:
[    53.711] 	X.Org ANSI C Emulation: 0.4
[    53.711] 	X.Org Video Driver: 20.0
[    53.711] 	X.Org XInput driver : 22.1
[    53.711] 	X.Org Server Extension : 9.0
[    53.712] (++) using VT number 1

[    53.712] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    53.713] (II) xfree86: Adding drm device (/dev/dri/card1)
[    53.713] (II) xfree86: Adding drm device (/dev/dri/card0)
[    53.716] (--) PCI:*(0:0:2:0) 8086:191b:1043:1d6d rev 6, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    53.716] (--) PCI: (0:1:0:0) 10de:139b:1043:1d6d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    53.717] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    53.717] (II) LoadModule: "glx"
[    53.718] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    53.773] (II) Module glx: vendor="NVIDIA Corporation"
[    53.773] 	compiled for 4.0.2, module version = 1.0.0
[    53.773] 	Module class: X.Org Server Extension
[    53.774] (II) NVIDIA GLX Module  367.27  Thu Jun  9 18:19:55 PDT 2016
[    53.774] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    53.774] 	loading driver: nvidia
[    53.774] (==) Matched intel as autoconfigured driver 0
[    53.774] (==) Matched nvidia as autoconfigured driver 1
[    53.774] (==) Matched nouveau as autoconfigured driver 2
[    53.774] (==) Matched nv as autoconfigured driver 3
[    53.774] (==) Matched intel as autoconfigured driver 4
[    53.774] (==) Matched modesetting as autoconfigured driver 5
[    53.774] (==) Matched fbdev as autoconfigured driver 6
[    53.774] (==) Matched vesa as autoconfigured driver 7
[    53.774] (==) Assigned the driver to the xf86ConfigLayout
[    53.774] (II) LoadModule: "intel"
[    53.775] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    53.778] (II) Module intel: vendor="X.Org Foundation"
[    53.778] 	compiled for 1.18.3, module version = 2.99.917
[    53.778] 	Module class: X.Org Video Driver
[    53.778] 	ABI class: X.Org Video Driver, version 20.0
[    53.778] (II) LoadModule: "nvidia"
[    53.779] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    53.785] (II) Module nvidia: vendor="NVIDIA Corporation"
[    53.785] 	compiled for 4.0.2, module version = 1.0.0
[    53.785] 	Module class: X.Org Video Driver
[    53.786] (II) LoadModule: "nouveau"
[    53.786] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    53.788] (II) Module nouveau: vendor="X.Org Foundation"
[    53.788] 	compiled for 1.18.0, module version = 1.0.12
[    53.788] 	Module class: X.Org Video Driver
[    53.788] 	ABI class: X.Org Video Driver, version 20.0
[    53.788] (II) LoadModule: "nv"
[    53.788] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[    53.789] (II) Module nv: vendor="X.Org Foundation"
[    53.789] 	compiled for 1.18.0, module version = 2.1.20
[    53.789] 	Module class: X.Org Video Driver
[    53.789] 	ABI class: X.Org Video Driver, version 20.0
[    53.789] (II) LoadModule: "modesetting"
[    53.790] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    53.791] (II) Module modesetting: vendor="X.Org Foundation"
[    53.791] 	compiled for 1.18.3, module version = 1.18.3
[    53.791] 	Module class: X.Org Video Driver
[    53.791] 	ABI class: X.Org Video Driver, version 20.0
[    53.791] (II) LoadModule: "fbdev"
[    53.791] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    53.792] (II) Module fbdev: vendor="X.Org Foundation"
[    53.792] 	compiled for 1.18.0, module version = 0.4.4
[    53.792] 	Module class: X.Org Video Driver
[    53.792] 	ABI class: X.Org Video Driver, version 20.0
[    53.792] (II) LoadModule: "vesa"
[    53.792] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    53.792] (II) Module vesa: vendor="X.Org Foundation"
[    53.792] 	compiled for 1.18.0, module version = 2.3.4
[    53.793] 	Module class: X.Org Video Driver
[    53.793] 	ABI class: X.Org Video Driver, version 20.0
[    53.793] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    53.793] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    53.793] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    53.793] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    53.793] (II) NVIDIA dlloader X Driver  367.27  Thu Jun  9 17:57:30 PDT 2016
[    53.793] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    53.793] (II) NOUVEAU driver 
[    53.793] (II) NOUVEAU driver for NVIDIA chipset families :
[    53.793] 	RIVA TNT        (NV04)
[    53.793] 	RIVA TNT2       (NV05)
[    53.793] 	GeForce 256     (NV10)
[    53.793] 	GeForce 2       (NV11, NV15)
[    53.793] 	GeForce 4MX     (NV17, NV18)
[    53.793] 	GeForce 3       (NV20)
[    53.794] 	GeForce 4Ti     (NV25, NV28)
[    53.794] 	GeForce FX      (NV3x)
[    53.794] 	GeForce 6       (NV4x)
[    53.794] 	GeForce 7       (G7x)
[    53.794] 	GeForce 8       (G8x)
[    53.794] 	GeForce GTX 200 (NVA0)
[    53.794] 	GeForce GTX 400 (NVC0)
[    53.794] (II) NOUVEAU driver 
[    53.794] (II) NOUVEAU driver for NVIDIA chipset families :
[    53.794] 	RIVA TNT        (NV04)
[    53.794] 	RIVA TNT2       (NV05)
[    53.794] 	GeForce 256     (NV10)
[    53.794] 	GeForce 2       (NV11, NV15)
[    53.794] 	GeForce 4MX     (NV17, NV18)
[    53.794] 	GeForce 3       (NV20)
[    53.794] 	GeForce 4Ti     (NV25, NV28)
[    53.794] 	GeForce FX      (NV3x)
[    53.794] 	GeForce 6       (NV4x)
[    53.794] 	GeForce 7       (G7x)
[    53.794] 	GeForce 8       (G8x)
[    53.794] 	GeForce GTX 200 (NVA0)
[    53.794] 	GeForce GTX 400 (NVC0)
[    53.794] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    53.794] (II) FBDEV: driver for framebuffer: fbdev
[    53.794] (II) VESA: driver for VESA chipsets: vesa
[    53.795] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160229
[    53.795] (II) intel(0): SNA compiled from 2.99.917-662-gb617f80
[    53.796] (EE) [drm] Failed to open DRM device for (null): -22
[    53.796] (EE) [drm] Failed to open DRM device for (null): -22
[    53.796] (WW) Falling back to old probe method for modesetting
[    53.797] (WW) Falling back to old probe method for fbdev
[    53.797] (II) Loading sub module "fbdevhw"
[    53.797] (II) LoadModule: "fbdevhw"
[    53.797] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    53.797] (II) Module fbdevhw: vendor="X.Org Foundation"
[    53.797] 	compiled for 1.18.3, module version = 0.0.2
[    53.797] 	ABI class: X.Org Video Driver, version 20.0
[    53.797] (WW) Falling back to old probe method for vesa
[    53.798] (--) intel(0): gen9 engineering sample
[    53.798] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[    53.798] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    53.798] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    53.798] (==) intel(0): RGB weight 888
[    53.798] (==) intel(0): Default visual is TrueColor
[    53.799] (II) intel(0): Output eDP1 has no monitor section
[    53.813] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    53.813] (II) intel(0): Enabled output eDP1
[    53.813] (II) intel(0): Output DP1 has no monitor section
[    53.813] (II) intel(0): Enabled output DP1
[    53.813] (II) intel(0): Output HDMI1 has no monitor section
[    53.813] (II) intel(0): Enabled output HDMI1
[    53.813] (II) intel(0): Output HDMI2 has no monitor section
[    53.813] (II) intel(0): Enabled output HDMI2
[    53.813] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    53.813] (II) intel(0): Output VIRTUAL1 has no monitor section
[    53.814] (II) intel(0): Enabled output VIRTUAL1
[    53.814] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    53.814] (==) intel(0): TearFree disabled
[    53.814] (==) intel(0): DPI set to (96, 96)
[    53.814] (II) Loading sub module "dri2"
[    53.814] (II) LoadModule: "dri2"
[    53.814] (II) Module "dri2" already built-in
[    53.814] (II) Loading sub module "present"
[    53.814] (II) LoadModule: "present"
[    53.814] (II) Module "present" already built-in
[    53.814] (II) UnloadModule: "fbdev"
[    53.814] (II) Unloading fbdev
[    53.814] (II) UnloadSubModule: "fbdevhw"
[    53.814] (II) Unloading fbdevhw
[    53.814] (II) UnloadModule: "vesa"
[    53.814] (II) Unloading vesa
[    53.814] (==) Depth 24 pixmap format is 32 bpp
[    53.818] (II) intel(0): SNA initialized with Skylake (gen9) backend
[    53.818] (==) intel(0): Backing store enabled
[    53.818] (==) intel(0): Silken mouse enabled
[    53.819] (II) intel(0): HW Cursor enabled
[    53.819] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    53.819] (==) intel(0): DPMS enabled
[    53.820] (==) intel(0): Display hotplug detection enabled
[    53.820] (II) intel(0): [DRI2] Setup complete
[    53.820] (II) intel(0): [DRI2]   DRI driver: i965
[    53.820] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    53.820] (II) intel(0): direct rendering: DRI2 enabled
[    53.820] (II) intel(0): hardware support for Present enabled
[    53.820] (--) RandR disabled
[    53.831] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    53.837] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    53.838] (II) intel(0): Setting screen physical size to 508 x 285
[    53.922] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    53.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    53.922] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    53.922] (II) LoadModule: "libinput"
[    53.922] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    53.932] (II) Module libinput: vendor="X.Org Foundation"
[    53.932] 	compiled for 1.18.3, module version = 0.19.0
[    53.932] 	Module class: X.Org XInput Driver
[    53.932] 	ABI class: X.Org XInput driver, version 22.1
[    53.932] (II) Using input driver 'libinput' for 'Power Button'
[    53.932] (**) Power Button: always reports core events
[    53.932] (**) Option "Device" "/dev/input/event3"
[    53.932] (**) Option "_source" "server/udev"
[    53.933] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    53.933] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    53.943] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    53.943] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    53.944] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    53.944] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    53.945] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[    53.945] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[    53.945] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    53.945] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    53.945] (**) Asus Wireless Radio Control: always reports core events
[    53.945] (**) Option "Device" "/dev/input/event4"
[    53.945] (**) Option "_source" "server/udev"
[    53.945] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[    53.945] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[    53.956] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4/event4"
[    53.956] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    53.957] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[    53.957] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[    53.958] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    53.958] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    53.958] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    53.958] (II) Using input driver 'libinput' for 'Video Bus'
[    53.958] (**) Video Bus: always reports core events
[    53.958] (**) Option "Device" "/dev/input/event7"
[    53.958] (**) Option "_source" "server/udev"
[    53.959] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    53.959] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    53.970] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[    53.970] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    53.971] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    53.971] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    53.971] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    53.971] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    53.971] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    53.971] (II) Using input driver 'libinput' for 'Video Bus'
[    53.971] (**) Video Bus: always reports core events
[    53.971] (**) Option "Device" "/dev/input/event8"
[    53.971] (**) Option "_source" "server/udev"
[    53.972] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    53.972] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    53.983] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8/event8"
[    53.983] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    53.984] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    53.984] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    53.985] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    53.985] (II) No input driver specified, ignoring this device.
[    53.985] (II) This device may have been added with another device file.
[    53.985] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    53.985] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    53.985] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    53.985] (II) Using input driver 'libinput' for 'Sleep Button'
[    53.985] (**) Sleep Button: always reports core events
[    53.985] (**) Option "Device" "/dev/input/event2"
[    53.985] (**) Option "_source" "server/udev"
[    53.986] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[    53.986] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[    53.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    53.996] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    53.997] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[    53.997] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[    53.999] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[    53.999] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    53.999] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[    53.999] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[    53.999] (**) USB2.0 HD UVC WebCam: always reports core events
[    53.999] (**) Option "Device" "/dev/input/event6"
[    53.999] (**) Option "_source" "server/udev"
[    54.000] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is tagged by udev as: Keyboard
[    54.000] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is a keyboard
[    54.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input6/event6"
[    54.033] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 11)
[    54.034] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is tagged by udev as: Keyboard
[    54.034] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event6 is a keyboard
[    54.035] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event10)
[    54.035] (**) Elan Touchpad: Applying InputClass "evdev touchpad catchall"
[    54.035] (**) Elan Touchpad: Applying InputClass "evdev touchscreen catchall"
[    54.035] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[    54.035] (**) Elan Touchpad: Applying InputClass "libinput touchscreen catchall"
[    54.035] (**) Elan Touchpad: Applying InputClass "touchpad catchall"
[    54.035] (**) Elan Touchpad: Applying InputClass "Default clickpad buttons"
[    54.035] (II) LoadModule: "synaptics"
[    54.035] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    54.037] (II) Module synaptics: vendor="X.Org Foundation"
[    54.037] 	compiled for 1.18.3, module version = 1.8.99
[    54.037] 	Module class: X.Org XInput Driver
[    54.037] 	ABI class: X.Org XInput driver, version 22.1
[    54.037] (II) Using input driver 'synaptics' for 'Elan Touchpad'
[    54.037] (**) Elan Touchpad: always reports core events
[    54.038] (**) Option "Device" "/dev/input/event10"
[    54.066] (II) synaptics: Elan Touchpad: found clickpad property
[    54.067] (--) synaptics: Elan Touchpad: x-axis range 0 - 3097 (res 32)
[    54.067] (--) synaptics: Elan Touchpad: y-axis range 0 - 2119 (res 33)
[    54.067] (--) synaptics: Elan Touchpad: pressure range 0 - 255
[    54.067] (--) synaptics: Elan Touchpad: finger width range 0 - 15
[    54.067] (--) synaptics: Elan Touchpad: buttons: left double triple
[    54.067] (--) synaptics: Elan Touchpad: Vendor 0x4f3 Product 0x5
[    54.067] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    54.067] (--) synaptics: Elan Touchpad: touchpad found
[    54.067] (**) Elan Touchpad: always reports core events
[    54.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1000:00/input/input10/event10"
[    54.093] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 12)
[    54.093] (**) synaptics: Elan Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    54.093] (**) synaptics: Elan Touchpad: (accel) MaxSpeed is now 1.75
[    54.093] (**) synaptics: Elan Touchpad: (accel) AccelFactor is now 0.053
[    54.093] (**) Elan Touchpad: (accel) keeping acceleration scheme 1
[    54.093] (**) Elan Touchpad: (accel) acceleration profile 1
[    54.093] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[    54.093] (**) Elan Touchpad: (accel) acceleration threshold: 4
[    54.094] (--) synaptics: Elan Touchpad: touchpad found
[    54.094] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse0)
[    54.095] (**) Elan Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    54.095] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    54.095] (II) No input driver specified, ignoring this device.
[    54.095] (II) This device may have been added with another device file.
[    54.096] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    54.096] (II) No input driver specified, ignoring this device.
[    54.096] (II) This device may have been added with another device file.
[    54.096] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    54.096] (II) No input driver specified, ignoring this device.
[    54.096] (II) This device may have been added with another device file.
[    54.097] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    54.097] (II) No input driver specified, ignoring this device.
[    54.097] (II) This device may have been added with another device file.
[    54.097] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    54.097] (II) No input driver specified, ignoring this device.
[    54.097] (II) This device may have been added with another device file.
[    54.098] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[    54.098] (II) No input driver specified, ignoring this device.
[    54.098] (II) This device may have been added with another device file.
[    54.098] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[    54.098] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    54.098] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    54.098] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    54.098] (**) Asus WMI hotkeys: always reports core events
[    54.098] (**) Option "Device" "/dev/input/event9"
[    54.098] (**) Option "_source" "server/udev"
[    54.099] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[    54.099] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[    54.116] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event9"
[    54.116] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[    54.117] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[    54.117] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[    54.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    54.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    54.118] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    54.118] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    54.118] (**) AT Translated Set 2 keyboard: always reports core events
[    54.118] (**) Option "Device" "/dev/input/event0"
[    54.118] (**) Option "_source" "server/udev"
[    54.119] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    54.119] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    54.143] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    54.143] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    54.144] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    54.144] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    54.145] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    54.145] (II) No input driver specified, ignoring this device.
[    54.145] (II) This device may have been added with another device file.
[    55.817] (II) intel(0): EDID vendor "CMN", prod id 5941
[    55.817] (II) intel(0): Printing DDC gathered Modelines:
[    55.817] (II) intel(0): Modeline "1920x1080"x0.0  140.00  1920 1968 2000 2102  1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
[    74.824] (II) UnloadModule: "libinput"
[    74.824] (II) UnloadModule: "libinput"
[    74.824] (II) UnloadModule: "synaptics"
[    74.824] (II) UnloadModule: "libinput"
[    74.824] (II) UnloadModule: "libinput"
[    74.824] (II) UnloadModule: "libinput"
[    74.824] (II) UnloadModule: "libinput"
[    74.824] (II) UnloadModule: "libinput"
[    74.824] (II) UnloadModule: "libinput"
[    74.862] (II) Server terminated successfully (0). Closing log file.

Offline

#4 2016-06-21 15:41:07

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,469

Re: (EE) Screen 0 deleted because of no matching config section.

Check nvidia wiki page, nividia-xconfig is no longer needed and can mess up things.

Your system has 2 videocards, an integrated Intel one and an nvidia card.
Currently the intel card appears to be the default one,and your processor seems to come from the skylake family.
Skylake is known to often need specific kernel parameters to make things work.

forget sddm login manager for now, boot to console, use xinitrc /startx method until you got things working.

is xf86-video-intel installed, have you blacklisted nouveau kernelmodule ?
Are you aiming for a bumblebee / optirun setup ?

Last edited by Lone_Wolf (2016-06-21 15:42:14)


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

#5 2016-06-22 18:43:13

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Re: (EE) Screen 0 deleted because of no matching config section.

Lone_Wolf wrote:

Check nvidia wiki page, nividia-xconfig is no longer needed and can mess up things.

Your system has 2 videocards, an integrated Intel one and an nvidia card.
Currently the intel card appears to be the default one,and your processor seems to come from the skylake family.
Skylake is known to often need specific kernel parameters to make things work.

forget sddm login manager for now, boot to console, use xinitrc /startx method until you got things working.

is xf86-video-intel installed, have you blacklisted nouveau kernelmodule ?
Are you aiming for a bumblebee / optirun setup ?

I have switched to a bumblebee setup for now and works okay. Though I'd really like it if everything were simply to be ran from my NVidia GPU as I dislike having to go through and specify which applications I want to run with primusrun/optirun. I cannot seem to see any options within my BIOS to disable the integrated Intel GPU, is there any way around this to make it purely NVidia?

Offline

#6 2016-06-22 22:57:16

mrunion
Member
From: Jonesborough, TN
Registered: 2007-01-26
Posts: 1,938
Website

Re: (EE) Screen 0 deleted because of no matching config section.

I have an Optimus laptop and only use the nVidia card. But you xorg doesn;t look like the one in the Wiki: https://wiki.archlinux.org/index.php/NVIDIA_Optimus

And make sure you read ALL of the Wiki -- about using xrandr to set some things and making that run at startup, etc.

Did you search the Wiki and miss this? You seem to ask a lot of questions about things that are already answered.

Last edited by mrunion (2016-06-22 22:58:09)


Matt

"It is very difficult to educate the educated."

Offline

#7 2016-06-22 23:32:11

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Re: (EE) Screen 0 deleted because of no matching config section.

mrunion wrote:

I have an Optimus laptop and only use the nVidia card. But you xorg doesn;t look like the one in the Wiki: https://wiki.archlinux.org/index.php/NVIDIA_Optimus

And make sure you read ALL of the Wiki -- about using xrandr to set some things and making that run at startup, etc.

Did you search the Wiki and miss this? You seem to ask a lot of questions about things that are already answered.

I've read all of the Wiki and included xrandr, I also used startx for bug testing with my configuration and fixed some errors which were showing in my /var/log/Xorg.0.log (apologies but I cannot recall them now). What it all boiled down to was me not being able to start the Xorg server due to the error shown in the title. My configuration shown here was the one that I've put together which removes all errors from the one shown in the wiki specifically for my laptop. All I've been requesting in this thread is a pointer as to where a configuration could be looking for "Screen 0" and why it thinks it's not declared. From what I can see, this question has not been answered yet and none of my reading through the Wiki has solved this for me either.

All errors from any Google attempts I've made have pointed to having something similar to: "Device(s) detected, but none match those in the config file." included in the log file. This error would then show the user what exactly it is they've missed, however my error does not include this extra section that allows me to debug. This could either be down to Xorg having had an update or my error is simply different and is an issue which I cannot find the answer to.

Apologies if this specific issue has been answered elsewhere, but I've spent countless hours trying to figure out what exactly it's referring to but cannot debug it. Even with the Arch Wiki and Google at my hands, no good solution has arisen.

Last edited by numb3rz (2016-06-22 23:51:14)

Offline

#8 2016-06-23 02:38:21

AnAkkk
Member
Registered: 2014-03-03
Posts: 148

Re: (EE) Screen 0 deleted because of no matching config section.

I don't think that "(EE) Screen 0 deleted because of no matching config section" is really an issue. I remember that I've always had this "error" when trying to run everything on the Nvidia card, and still everything worked fine. Your issue might be something different.

EDIT:

Your issues seem to be:
[    53.831] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

EDIT 2:

Actually that's only in your 2nd Xorg.0.log.

Last edited by AnAkkk (2016-06-23 02:41:51)

Offline

#9 2016-06-23 12:07:39

numb3rz
Member
Registered: 2016-06-14
Posts: 24

Re: (EE) Screen 0 deleted because of no matching config section.

AnAkkk wrote:

I don't think that "(EE) Screen 0 deleted because of no matching config section" is really an issue. I remember that I've always had this "error" when trying to run everything on the Nvidia card, and still everything worked fine. Your issue might be something different.

EDIT:

Your issues seem to be:
[    53.831] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

EDIT 2:

Actually that's only in your 2nd Xorg.0.log.

Thanks for replying! Maybe KDE is failing to load for some odd reason?

/root/.xinitrc

xrandr --setprovideroutputsource modsetting NVIDIA-0
xrandr --auto
exec startkde

This is what I have for starting KDE when X starts, though KDE seems to be loading up just fine using the standard bumblebee setup and SDDM. Maybe I'll play around with it a little more there and see if anything works.

Offline

#10 2016-06-23 14:14:50

matthew_TKA
Member
From: Texas
Registered: 2016-06-02
Posts: 34
Website

Re: (EE) Screen 0 deleted because of no matching config section.

Hello again @numb3rz!

Did you end up trying out the "solution" I had mentioned in your other thread here?

Basically ends up being what @Lone_Wolf suggested as well.  Blacklisting the modules was key.

I definitely don't see a full blown solution for this just yet with my 970M... but at least it works ok for now.

Mine defaults to Nvidia only and then I have to manually disable the Nvidia with:

sudo modprobe bbswitch

I had to add a few modifications as I describe on that linked post.

BTW... My full battery goes from 2.5hr to 6.5hr estimated when I disable the GPU... So it definitely makes sense to disable the GPU at times if you don't plan on mostly playing games or using 3D modeling applications.

I would keep an eye out for new changes in BumbleBee and also keep an eye out for discussions such as this.


MSI GS40 6QE PHANTOM
Website

Offline

#11 2016-06-23 15:24:30

Lone_Wolf
Member
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 7,469

Re: (EE) Screen 0 deleted because of no matching config section.

Section "Screen"
    Identifier     "Screen 0"
    Device         "nvidia"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection
[  1977.125] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1977.127] (==) ServerLayout "Default Layout"
[  1977.127] (**) |-->Screen "Screen 0" (0)
[  1977.127] (**) |   |-->Monitor "<default monitor>"
[  1977.127] (**) |   |-->Device "nvidia"
[  1977.127] (**) |   |-->GPUDevice "intel"
[  1977.127] (==) No monitor specified for screen "Screen 0".

The xorg.conf  tells X that screen 0 is connected through the nvidia driver.
X however sees screen 0 as being connected through the intel card.
The xorg.conf says stuff that doesn't match what X sees >> no matching config section >> screen 0 is deleted .

the xorg.conf created by nvidia-xconfig is faulty.


Multi-init booting with apg Openrc and systemd coexisting
Automounting : not needed, i prefer pmount
Aur helpers : makepkg + my own local repo === rarely need them

Offline

Board footer

Powered by FluxBB