You are not logged in.

#1 2018-11-30 14:56:14

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,108

Computer restarts when cold booting

I have this weird issue where, if I cold boot my machine, it restarts again.

I don't have any login manager and I login on CLI and use startx. Sometimes I put my login info -- and the second it reaches the desktop it restarts. I have also tried just sitting at the login prompt and sure enough it restarts then too. Also once it restarts, I don't have any problems in using the machine. Strange thing is if I reboot or even if I shutdown and restart the machine -- then it works just fine.


I get the mei and mei_wdt and mei_me errors, but that doesn't seem to be related to the machine restarting on cold boot.

Here's dmesg

[    0.000000] Linux version 4.19.2-arch1-1-ARCH (builduser@heftig-16038) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Tue Nov 13 21:16:19 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../intel-ucode.img,../initramfs-linux.img
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf3ff7ff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf3ff800-0x00000000bf453bff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf453c00-0x00000000bf455bff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf455c00-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. OptiPlex 755                 /0PU052, BIOS A22 06/11/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2659.936 MHz processor
[    0.003343] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003346] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.003352] last_pfn = 0x238000 max_arch_pfn = 0x400000000
[    0.003358] MTRR default type: write-back
[    0.003359] MTRR fixed ranges enabled:
[    0.003360]   00000-9FFFF write-back
[    0.003361]   A0000-BFFFF uncachable
[    0.003362]   C0000-CFFFF write-protect
[    0.003363]   D0000-EFFFF uncachable
[    0.003364]   F0000-FFFFF write-protect
[    0.003364] MTRR variable ranges enabled:
[    0.003366]   0 base 0BF600000 mask FFFE00000 uncachable
[    0.003367]   1 base 0BF800000 mask FFF800000 uncachable
[    0.003368]   2 base 0BF500000 mask FFFF00000 uncachable
[    0.003369]   3 base 0C0000000 mask FC0000000 uncachable
[    0.003370]   4 disabled
[    0.003370]   5 disabled
[    0.003371]   6 disabled
[    0.004940] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.005103] last_pfn = 0xbf3ff max_arch_pfn = 0x400000000
[    0.015403] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [(____ptrval____)]
[    0.027355] Scanning 1 areas for low memory corruption
[    0.027358] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.027363] BRK [0x1a8c01000, 0x1a8c01fff] PGTABLE
[    0.027365] BRK [0x1a8c02000, 0x1a8c02fff] PGTABLE
[    0.027367] BRK [0x1a8c03000, 0x1a8c03fff] PGTABLE
[    0.027386] BRK [0x1a8c04000, 0x1a8c04fff] PGTABLE
[    0.027388] BRK [0x1a8c05000, 0x1a8c05fff] PGTABLE
[    0.027474] BRK [0x1a8c06000, 0x1a8c06fff] PGTABLE
[    0.027497] BRK [0x1a8c07000, 0x1a8c07fff] PGTABLE
[    0.027522] BRK [0x1a8c08000, 0x1a8c08fff] PGTABLE
[    0.027625] RAMDISK: [mem 0x7f44f000-0x7fffffff]
[    0.027632] ACPI: Early table checksum verification disabled
[    0.030644] ACPI: RSDP 0x00000000000FEC00 000024 (v02 DELL  )
[    0.030648] ACPI: XSDT 0x00000000000FC5AB 00008C (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030655] ACPI: FACP 0x00000000000FC6DB 0000F4 (v03 DELL   B9K      00000015 ASL  00000061)
[    0.030660] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180810/tbfadt-569)
[    0.030750] ACPI: DSDT 0x00000000FFF7AB7B 004596 (v01 DELL   dt_ex    00001000 INTL 20050624)
[    0.030758] ACPI: FACS 0x00000000BF3FF800 000040
[    0.030762] ACPI: FACS 0x00000000BF3FF800 000040
[    0.030827] ACPI: SSDT 0x00000000FFF7F230 0000AA (v01 DELL   st_ex    00001000 INTL 20050624)
[    0.030831] ACPI: APIC 0x00000000000FC7CF 000092 (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030835] ACPI: BOOT 0x00000000000FC861 000028 (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030839] ACPI: ASF! 0x00000000000FC889 000096 (v32 DELL   B9K      00000015 ASL  00000061)
[    0.030843] ACPI: MCFG 0x00000000000FC91F 00003E (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030846] ACPI: HPET 0x00000000000FC95D 000038 (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030850] ACPI: TCPA 0x00000000000FCBB9 000032 (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030854] ACPI: DMAR 0x00000000000FCBEB 000118 (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030858] ACPI: SLIC 0x00000000000FC995 000176 (v01 DELL   B9K      00000015 ASL  00000061)
[    0.030861] ACPI: SSDT 0x00000000BF3FF840 0001B7 (v01 DpgPmm Cpu0Ist  00000011 INTL 20050624)
[    0.030865] ACPI: SSDT 0x00000000BF3FFC49 0001B7 (v01 DpgPmm Cpu1Ist  00000011 INTL 20050624)
[    0.030869] ACPI: SSDT 0x00000000BF400052 000140 (v01 DpgPmm CpuPm    00000010 INTL 20050624)
[    0.031093] ACPI: Local APIC address 0xfee00000
[    0.031167] No NUMA configuration found
[    0.031168] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[    0.031171] NODE_DATA(0) allocated [mem 0x237ff8000-0x237ffbfff]
[    0.031198] Zone ranges:
[    0.031199]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.031201]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.031202]   Normal   [mem 0x0000000100000000-0x0000000237ffffff]
[    0.031204]   Device   empty
[    0.031205] Movable zone start for each node
[    0.031206] Early memory node ranges
[    0.031207]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.031208]   node   0: [mem 0x0000000000100000-0x00000000bf3fefff]
[    0.031208]   node   0: [mem 0x0000000100000000-0x0000000237ffffff]
[    0.031271] Reserved but unavailable: 3172 pages
[    0.031272] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
[    0.031274] On node 0 totalpages: 2061212
[    0.031275]   DMA zone: 64 pages used for memmap
[    0.031275]   DMA zone: 21 pages reserved
[    0.031276]   DMA zone: 3997 pages, LIFO batch:0
[    0.031376]   DMA32 zone: 12176 pages used for memmap
[    0.031377]   DMA32 zone: 779263 pages, LIFO batch:63
[    0.056738]   Normal zone: 19968 pages used for memmap
[    0.056740]   Normal zone: 1277952 pages, LIFO batch:63
[    0.097206] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.097327] ACPI: PM-Timer IO Port: 0x808
[    0.097330] ACPI: Local APIC address 0xfee00000
[    0.097340] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.097352] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.097355] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.097356] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.097358] ACPI: IRQ0 used by override.
[    0.097359] ACPI: IRQ9 used by override.
[    0.097361] Using ACPI (MADT) for SMP configuration information
[    0.097363] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.097371] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.097389] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.097391] PM: Registered nosave memory: [mem 0x0009e000-0x000effff]
[    0.097392] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.097393] PM: Registered nosave memory: [mem 0xbf3ff000-0xbf3fffff]
[    0.097394] PM: Registered nosave memory: [mem 0xbf400000-0xbf452fff]
[    0.097395] PM: Registered nosave memory: [mem 0xbf453000-0xbf453fff]
[    0.097395] PM: Registered nosave memory: [mem 0xbf454000-0xbf454fff]
[    0.097396] PM: Registered nosave memory: [mem 0xbf455000-0xbf455fff]
[    0.097397] PM: Registered nosave memory: [mem 0xbf456000-0xbfffffff]
[    0.097397] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.097398] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.097399] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.097399] PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
[    0.097400] PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
[    0.097401] PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
[    0.097402] PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
[    0.097402] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.097403] PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
[    0.097404] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.097407] [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.097407] Booting paravirtualized kernel on bare hardware
[    0.097411] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.256479] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[    0.256487] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.257245] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.257252] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.257254] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.257281] Built 1 zonelists, mobility grouping on.  Total pages: 2028983
[    0.257282] Policy zone: Normal
[    0.257284] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../intel-ucode.img,../initramfs-linux.img
[    0.275835] Calgary: detecting Calgary via BIOS EBDA area
[    0.275839] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.349164] Memory: 8007480K/8244848K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 237368K reserved, 0K cma-reserved)
[    0.349311] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.349324] Kernel/User page tables isolation: enabled
[    0.349391] ftrace: allocating 35542 entries in 139 pages
[    0.367128] rcu: Preemptible hierarchical RCU implementation.
[    0.367130] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.367131] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.367132] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.367132] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.367133] 	Tasks RCU enabled.
[    0.367134] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.369437] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.369598] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.371577] Console: colour VGA+ 80x25
[    0.371583] console [tty0] enabled
[    0.371603] ACPI: Core revision 20180810
[    0.446381] ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0x87 (20180810/tbprint-177)
[    0.446511] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.446519] hpet clockevent registered
[    0.446523] APIC: Switch to symmetric I/O mode setup
[    0.446525] DMAR: Host address width 36
[    0.446526] DMAR: DRHD base: 0x000000fedae000 flags: 0x0
[    0.446531] DMAR: dmar0: reg_base_addr fedae000 ver 1:0 cap c9008020a30270 ecap 1000
[    0.446532] DMAR: DRHD base: 0x000000fedaf000 flags: 0x0
[    0.446535] DMAR: dmar1: reg_base_addr fedaf000 ver 1:0 cap c0000020230270 ecap 1000
[    0.446536] DMAR: DRHD base: 0x000000fedb0000 flags: 0x0
[    0.446539] DMAR: dmar2: reg_base_addr fedb0000 ver 1:0 cap c0000020230270 ecap 1000
[    0.446539] DMAR: DRHD base: 0x000000fedb1000 flags: 0x1
[    0.446542] DMAR: dmar3: reg_base_addr fedb1000 ver 1:0 cap c9008020230270 ecap 1000
[    0.446543] DMAR: RMRR base: 0x000000bf458000 end: 0x000000bf46ffff
[    0.446544] DMAR: RMRR base: 0x000000bf600000 end: 0x000000bfffffff
[    0.446904] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.463190] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x265767586e9, max_idle_ns: 440795253060 ns
[    0.463203] Calibrating delay loop (skipped), value calculated using timer frequency.. 5322.53 BogoMIPS (lpj=8866453)
[    0.463205] pid_max: default: 32768 minimum: 301
[    0.463248] Security Framework initialized
[    0.463249] Yama: becoming mindful.
[    0.463254] AppArmor: AppArmor disabled by boot time parameter
[    0.466505] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.468769] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.468864] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.468935] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.469275] mce: CPU supports 6 MCE banks
[    0.469282] CPU0: Thermal monitoring enabled (TM2)
[    0.469285] process: using mwait in idle threads
[    0.469290] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.469290] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.469293] Spectre V2 : Mitigation: Full generic retpoline
[    0.469294] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.469295] Speculative Store Bypass: Vulnerable
[    0.469465] Freeing SMP alternatives memory: 28K
[    0.473192] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.489871] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.489884] ... version:                2
[    0.489885] ... bit width:              40
[    0.489886] ... generic registers:      2
[    0.489887] ... value mask:             000000ffffffffff
[    0.489888] ... max period:             000000007fffffff
[    0.489889] ... fixed-purpose events:   3
[    0.489890] ... event mask:             0000000700000003
[    0.496532] rcu: Hierarchical SRCU implementation.
[    0.520014] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.526539] smp: Bringing up secondary CPUs ...
[    0.566551] x86: Booting SMP configuration:
[    0.566553] .... node  #0, CPUs:      #1
[    0.569943] smp: Brought up 1 node, 2 CPUs
[    0.569943] smpboot: Max logical packages: 4
[    0.569943] smpboot: Total of 2 processors activated (10644.06 BogoMIPS)
[    0.573332] devtmpfs: initialized
[    0.573332] x86/mm: Memory block size: 128MB
[    0.574290] PM: Registering ACPI NVS region [mem 0xbf3ff800-0xbf453bff] (345088 bytes)
[    0.574360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.574360] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.574360] pinctrl core: initialized pinctrl subsystem
[    0.574360] RTC time: 15:37:18, date: 11/21/18
[    0.574360] NET: Registered protocol family 16
[    0.574360] audit: initializing netlink subsys (disabled)
[    0.574360] audit: type=2000 audit(1542814637.126:1): state=initialized audit_enabled=0 res=1
[    0.576538] cpuidle: using governor ladder
[    0.576544] cpuidle: using governor menu
[    0.576567] Simple Boot Flag at 0x7a set to 0x80
[    0.576587] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.576589] ACPI: bus type PCI registered
[    0.576590] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.576680] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.576683] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.576698] PCI: Using configuration type 1 for base access
[    0.577828] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.577828] ACPI: Added _OSI(Module Device)
[    0.577828] ACPI: Added _OSI(Processor Device)
[    0.577828] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.577828] ACPI: Added _OSI(Processor Aggregator Device)
[    0.577828] ACPI: Added _OSI(Linux-Dell-Video)
[    0.577828] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.631732] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.664708] ACPI: Interpreter enabled
[    0.664731] ACPI: (supports S0 S1 S3 S4 S5)
[    0.664732] ACPI: Using IOAPIC for interrupt routing
[    0.664848] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.666061] ACPI: Enabled 15 GPEs in block 00 to 3F
[    0.680172] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[    0.804497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.804504] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.804509] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.813172] PCI host bridge to bus 0000:00
[    0.813175] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.813177] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.813179] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.813180] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window]
[    0.813182] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.813184] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000 window]
[    0.813185] pci_bus 0000:00: root bus resource [mem 0xbf500000-0xdfffffff window]
[    0.813187] pci_bus 0000:00: root bus resource [mem 0xff980800-0xff980bff window]
[    0.813189] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff window]
[    0.813190] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff window]
[    0.813196] pci_bus 0000:00: root bus resource [mem 0xfedad800-0xfedadfff window]
[    0.813198] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.813206] pci 0000:00:00.0: [8086:29b0] type 00 class 0x060000
[    0.813628] pci 0000:00:01.0: [8086:29b1] type 01 class 0x060400
[    0.813664] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.814067] pci 0000:00:02.0: [8086:29b2] type 00 class 0x030000
[    0.814076] pci 0000:00:02.0: reg 0x10: [mem 0xfea00000-0xfea7ffff]
[    0.814080] pci 0000:00:02.0: reg 0x14: [io  0xec90-0xec97]
[    0.814085] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.814089] pci 0000:00:02.0: reg 0x1c: [mem 0xfeb00000-0xfebfffff]
[    0.814503] pci 0000:00:02.1: [8086:29b3] type 00 class 0x038000
[    0.814511] pci 0000:00:02.1: reg 0x10: [mem 0xfea80000-0xfeafffff]
[    0.814925] pci 0000:00:03.0: [8086:29b4] type 00 class 0x078000
[    0.814937] pci 0000:00:03.0: reg 0x10: [mem 0xfedad000-0xfedad00f 64bit]
[    0.814969] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.815363] pci 0000:00:03.2: [8086:29b6] type 00 class 0x010185
[    0.815373] pci 0000:00:03.2: reg 0x10: [io  0xfe80-0xfe87]
[    0.815377] pci 0000:00:03.2: reg 0x14: [io  0xfe90-0xfe93]
[    0.815382] pci 0000:00:03.2: reg 0x18: [io  0xfea0-0xfea7]
[    0.815386] pci 0000:00:03.2: reg 0x1c: [io  0xfeb0-0xfeb3]
[    0.815390] pci 0000:00:03.2: reg 0x20: [io  0xfef0-0xfeff]
[    0.815799] pci 0000:00:03.3: [8086:29b7] type 00 class 0x070002
[    0.815808] pci 0000:00:03.3: reg 0x10: [io  0xec98-0xec9f]
[    0.815813] pci 0000:00:03.3: reg 0x14: [mem 0xfe9da000-0xfe9dafff]
[    0.816251] pci 0000:00:19.0: [8086:10bd] type 00 class 0x020000
[    0.816267] pci 0000:00:19.0: reg 0x10: [mem 0xfe9e0000-0xfe9fffff]
[    0.816274] pci 0000:00:19.0: reg 0x14: [mem 0xfe9db000-0xfe9dbfff]
[    0.816281] pci 0000:00:19.0: reg 0x18: [io  0xecc0-0xecdf]
[    0.816331] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.816736] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.816773] pci 0000:00:1a.0: reg 0x20: [io  0xff20-0xff3f]
[    0.817203] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.817240] pci 0000:00:1a.1: reg 0x20: [io  0xff00-0xff1f]
[    0.817678] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.817697] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9d9c00-0xfe9d9fff]
[    0.817768] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.818174] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.818192] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9dc000-0xfe9dffff 64bit]
[    0.818253] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.818654] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.818720] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.819139] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.819176] pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
[    0.819607] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.819644] pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
[    0.820077] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.820114] pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
[    0.820553] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.820572] pci 0000:00:1d.7: reg 0x10: [mem 0xff980800-0xff980bff]
[    0.820643] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.821046] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.821489] pci 0000:00:1f.0: [8086:2914] type 00 class 0x060100
[    0.821561] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.821565] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH6 GPIO
[    0.821569] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[    0.821572] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[    0.821995] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.822011] pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
[    0.822017] pci 0000:00:1f.2: reg 0x14: [io  0xfe10-0xfe13]
[    0.822023] pci 0000:00:1f.2: reg 0x18: [io  0xfe20-0xfe27]
[    0.822029] pci 0000:00:1f.2: reg 0x1c: [io  0xfe30-0xfe33]
[    0.822036] pci 0000:00:1f.2: reg 0x20: [io  0xfec0-0xfedf]
[    0.822042] pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
[    0.822077] pci 0000:00:1f.2: PME# supported from D3hot
[    0.822479] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.822495] pci 0000:00:1f.3: reg 0x10: [mem 0xfe9d9b00-0xfe9d9bff 64bit]
[    0.822511] pci 0000:00:1f.3: reg 0x20: [io  0xece0-0xecff]
[    0.822943] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.822947] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.822987] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.822991] pci 0000:00:1c.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.823010] pci_bus 0000:03: extended config space not accessible
[    0.823060] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.823067] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.823069] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.823071] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.823072] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000effff window] (subtractive decode)
[    0.823074] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.823075] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfec00000 window] (subtractive decode)
[    0.823077] pci 0000:00:1e.0:   bridge window [mem 0xbf500000-0xdfffffff window] (subtractive decode)
[    0.823079] pci 0000:00:1e.0:   bridge window [mem 0xff980800-0xff980bff window] (subtractive decode)
[    0.823080] pci 0000:00:1e.0:   bridge window [mem 0xff97c000-0xff97ffff window] (subtractive decode)
[    0.823082] pci 0000:00:1e.0:   bridge window [mem 0xfed20000-0xfed9ffff window] (subtractive decode)
[    0.823083] pci 0000:00:1e.0:   bridge window [mem 0xfedad800-0xfedadfff window] (subtractive decode)
[    0.851428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.852351] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.853297] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.854220] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.855164] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.856101] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    0.857027] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.857954] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.858497] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.858497] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.858497] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.858497] vgaarb: loaded
[    0.858497] ACPI: bus type USB registered
[    0.858497] usbcore: registered new interface driver usbfs
[    0.858497] usbcore: registered new interface driver hub
[    0.858497] usbcore: registered new device driver usb
[    0.858497] pps_core: LinuxPPS API ver. 1 registered
[    0.858497] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.858497] PTP clock support registered
[    0.858497] EDAC MC: Ver: 3.0.0
[    0.858497] PCI: Using ACPI for IRQ routing
[    0.863655] PCI: pci_cache_line_size set to 64 bytes
[    0.863663] pci 0000:00:03.0: can't claim BAR 0 [mem 0xfedad000-0xfedad00f 64bit]: no compatible bridge window
[    0.863681] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xff970000-0xff9707ff]: no compatible bridge window
[    0.863699] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.863700] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.863702] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.863706] e820: reserve RAM buffer [mem 0xbf3ff800-0xbfffffff]
[    0.863818] NetLabel: Initializing
[    0.863819] NetLabel:  domain hash size = 128
[    0.863819] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.863837] NetLabel:  unlabeled traffic allowed by default
[    0.863841] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.863841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.863841] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.866551] clocksource: Switched to clocksource tsc-early
[    0.882361] VFS: Disk quotas dquot_6.6.0
[    0.882386] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.882490] pnp: PnP ACPI init
[    0.887517] pnp 00:00: disabling [io  0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.887519] pnp 00:00: disabling [io  0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.887558] system 00:00: [io  0x0c00-0x0c7f] has been reserved
[    0.887564] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.887809] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.896958] pnp 00:02: [dma 2]
[    0.897460] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.912027] pnp 00:03: [dma 0 disabled]
[    0.913240] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.919228] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.938279] pnp: PnP ACPI: found 5 devices
[    0.944634] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.944652] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.944654] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.944672] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.944675] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.944678] pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0200000-0xf02007ff]
[    0.944685] pci 0000:00:03.0: BAR 0: assigned [mem 0xf0200800-0xf020080f 64bit]
[    0.944690] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.944694] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.944698] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.944700] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.944704] pci 0000:00:1c.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.944707] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.944712] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.944720] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.944722] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.944724] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.944725] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[    0.944727] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.944729] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000 window]
[    0.944731] pci_bus 0000:00: resource 10 [mem 0xbf500000-0xdfffffff window]
[    0.944732] pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff window]
[    0.944734] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window]
[    0.944736] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff window]
[    0.944737] pci_bus 0000:00: resource 14 [mem 0xfedad800-0xfedadfff window]
[    0.944739] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.944741] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.944743] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.944744] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.944746] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.944747] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.944749] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.944751] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000effff window]
[    0.944752] pci_bus 0000:03: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.944754] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfec00000 window]
[    0.944755] pci_bus 0000:03: resource 10 [mem 0xbf500000-0xdfffffff window]
[    0.944757] pci_bus 0000:03: resource 11 [mem 0xff980800-0xff980bff window]
[    0.944759] pci_bus 0000:03: resource 12 [mem 0xff97c000-0xff97ffff window]
[    0.944760] pci_bus 0000:03: resource 13 [mem 0xfed20000-0xfed9ffff window]
[    0.944762] pci_bus 0000:03: resource 14 [mem 0xfedad800-0xfedadfff window]
[    0.944833] NET: Registered protocol family 2
[    0.945039] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.945091] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.945350] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.945759] TCP: Hash tables configured (established 65536 bind 65536)
[    0.945818] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.945873] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.945974] NET: Registered protocol family 1
[    0.945980] NET: Registered protocol family 44
[    0.945992] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.951120] PCI: CLS 64 bytes, default 64
[    0.951169] Unpacking initramfs...
[    1.118623] Freeing initrd memory: 11972K
[    1.118718] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.118720] software IO TLB: mapped [mem 0xbb3ff000-0xbf3ff000] (64MB)
[    1.118906] Scanning for low memory corruption every 60 seconds
[    1.119641] Initialise system trusted keyrings
[    1.119654] Key type blacklist registered
[    1.119766] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.121554] zbud: loaded
[    1.121840] pstore: using zstd compression
[    1.123284] Key type asymmetric registered
[    1.123286] Asymmetric key parser 'x509' registered
[    1.123295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.123332] io scheduler noop registered
[    1.123333] io scheduler deadline registered
[    1.123367] io scheduler cfq registered (default)
[    1.123369] io scheduler mq-deadline registered
[    1.123370] io scheduler kyber registered
[    1.123401] io scheduler bfq registered
[    1.124442] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.124526] intel_idle: does not run on family 6 model 23
[    1.124578] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.124596] ACPI: Power Button [VBTN]
[    1.124661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.124669] ACPI: Power Button [PWRF]
[    1.124999] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.145568] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.166563] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17, base_baud = 115200) is a 16550A
[    1.167306] usbcore: registered new interface driver usbserial_generic
[    1.167312] usbserial: USB Serial support registered for generic
[    1.167334] rtc_cmos 00:01: RTC can wake from S4
[    1.167452] rtc_cmos 00:01: registered as rtc0
[    1.167472] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[    1.167540] ledtrig-cpu: registered to indicate activity on CPUs
[    1.167795] NET: Registered protocol family 10
[    1.171632] Segment Routing with IPv6
[    1.171652] NET: Registered protocol family 17
[    1.171781] RAS: Correctable Errors collector initialized.
[    1.171818] microcode: sig=0x10676, pf=0x1, revision=0x610
[    1.171854] microcode: Microcode Update Driver: v2.2.
[    1.171868] sched_clock: Marking stable (1094939713, 76909630)->(1278716329, -106866986)
[    1.172030] registered taskstats version 1
[    1.172038] Loading compiled-in X.509 certificates
[    1.174589] Loaded X.509 cert 'Build time autogenerated kernel key: f6e1d5f82d4152da860d0481a64791fa607402d9'
[    1.174607] zswap: loaded using pool lzo/zbud
[    1.177841] Key type big_key registered
[    1.178176]   Magic number: 10:780:639
[    1.178267] rtc_cmos 00:01: setting system clock to 2018-11-21 15:37:18 UTC (1542814638)
[    1.180836] Freeing unused decrypted memory: 2040K
[    1.181915] Freeing unused kernel image memory: 1532K
[    1.181944] Write protecting the kernel read-only data: 18432k
[    1.182795] Freeing unused kernel image memory: 2008K
[    1.183003] Freeing unused kernel image memory: 456K
[    1.193764] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.193837] x86/mm: Checking user space page tables
[    1.204339] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.204342] Run /init as init process
[    1.226414] Linux agpgart interface v0.103
[    1.281018] VFIO - User Level meta-driver version: 0.3
[    1.352181] pci 0000:00:00.0: Intel Q35 Chipset
[    1.352195] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.353501] pci 0000:00:00.0: detected 8192K stolen memory
[    1.353546] [drm] Replacing VGA console driver
[    1.354058] Console: switching to colour dummy device 80x25
[    1.363251] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.363257] [drm] Driver supports precise vblank timestamp query.
[    1.363565] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.371178] [drm] RC6 disabled, disabling runtime PM support
[    1.371210] [drm] Initialized overlay support.
[    1.372122] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    1.456699] fbcon: inteldrmfb (fb0) is primary device
[    1.503687] Console: switching to colour frame buffer device 240x67
[    1.525281] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.637007] Floppy drive(s): fd0 is 1.44M
[    1.640645] SCSI subsystem initialized
[    1.641885] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.643110] ehci-pci: EHCI PCI platform driver
[    1.650982] libata version 3.00 loaded.
[    1.657385] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.657393] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.657404] ehci-pci 0000:00:1a.7: debug port 1
[    1.658628] ahci 0000:00:1f.2: version 3.0
[    1.660945] FDC 0 is a post-1991 82077
[    1.661309] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.661462] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
[    1.661465] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc ems sxs 
[    1.663412] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe9d9c00
[    1.669852] scsi host0: ata_generic
[    1.676675] scsi host1: ata_generic
[    1.676726] ata1: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
[    1.676728] ata2: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
[    1.678087] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.678155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.678157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.678159] usb usb1: Product: EHCI Host Controller
[    1.678160] usb usb1: Manufacturer: Linux 4.19.2-arch1-1-ARCH ehci_hcd
[    1.678162] usb usb1: SerialNumber: 0000:00:1a.7
[    1.678509] hub 1-0:1.0: USB hub found
[    1.678519] hub 1-0:1.0: 6 ports detected
[    1.679307] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.679313] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.679322] ehci-pci 0000:00:1d.7: debug port 1
[    1.683223] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.683239] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980800
[    1.683264] scsi host2: ahci
[    1.683406] scsi host3: ahci
[    1.683544] scsi host4: ahci
[    1.683684] scsi host5: ahci
[    1.683824] scsi host6: ahci
[    1.683962] scsi host7: ahci
[    1.684055] ata3: SATA max UDMA/133 abar m2048@0xf0200000 port 0xf0200100 irq 24
[    1.684057] ata4: SATA max UDMA/133 abar m2048@0xf0200000 port 0xf0200180 irq 24
[    1.684058] ata5: DUMMY
[    1.684059] ata6: DUMMY
[    1.684059] ata7: DUMMY
[    1.684061] ata8: SATA max UDMA/133 abar m2048@0xf0200000 port 0xf0200380 irq 24
[    1.696547] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.696622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.696625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.696627] usb usb2: Product: EHCI Host Controller
[    1.696629] usb usb2: Manufacturer: Linux 4.19.2-arch1-1-ARCH ehci_hcd
[    1.696631] usb usb2: SerialNumber: 0000:00:1d.7
[    1.696752] hub 2-0:1.0: USB hub found
[    1.696762] hub 2-0:1.0: 6 ports detected
[    1.699188] uhci_hcd: USB Universal Host Controller Interface driver
[    1.699605] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.699612] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.699618] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.699635] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[    1.701276] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.701278] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.701280] usb usb3: Product: UHCI Host Controller
[    1.701281] usb usb3: Manufacturer: Linux 4.19.2-arch1-1-ARCH uhci_hcd
[    1.701283] usb usb3: SerialNumber: 0000:00:1a.0
[    1.701384] hub 3-0:1.0: USB hub found
[    1.701392] hub 3-0:1.0: 2 ports detected
[    1.701879] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.701884] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.701890] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.701913] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[    1.701964] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.701966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.701967] usb usb4: Product: UHCI Host Controller
[    1.701969] usb usb4: Manufacturer: Linux 4.19.2-arch1-1-ARCH uhci_hcd
[    1.701970] usb usb4: SerialNumber: 0000:00:1a.1
[    1.702075] hub 4-0:1.0: USB hub found
[    1.702083] hub 4-0:1.0: 2 ports detected
[    1.702568] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.702573] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.702579] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.702596] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[    1.703001] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.703003] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.703005] usb usb5: Product: UHCI Host Controller
[    1.703006] usb usb5: Manufacturer: Linux 4.19.2-arch1-1-ARCH uhci_hcd
[    1.703008] usb usb5: SerialNumber: 0000:00:1d.0
[    1.703121] hub 5-0:1.0: USB hub found
[    1.703128] hub 5-0:1.0: 2 ports detected
[    1.703629] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.703635] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.703640] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.703656] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[    1.703832] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.703834] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.703835] usb usb6: Product: UHCI Host Controller
[    1.703837] usb usb6: Manufacturer: Linux 4.19.2-arch1-1-ARCH uhci_hcd
[    1.703838] usb usb6: SerialNumber: 0000:00:1d.1
[    1.703939] hub 6-0:1.0: USB hub found
[    1.703946] hub 6-0:1.0: 2 ports detected
[    1.704434] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.704439] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.704445] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.704462] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    1.704511] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.704513] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.704515] usb usb7: Product: UHCI Host Controller
[    1.704517] usb usb7: Manufacturer: Linux 4.19.2-arch1-1-ARCH uhci_hcd
[    1.704518] usb usb7: SerialNumber: 0000:00:1d.2
[    1.704620] hub 7-0:1.0: USB hub found
[    1.704628] hub 7-0:1.0: 2 ports detected
[    1.999401] ata8: SATA link down (SStatus 4 SControl 300)
[    2.126538] tsc: Refined TSC clocksource calibration: 2659.983 MHz
[    2.126545] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x265793d9a25, max_idle_ns: 440795207785 ns
[    2.126558] clocksource: Switched to clocksource tsc
[    2.156542] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.157114] ata3.00: LPM support broken, forcing max_power
[    2.157174] ata3.00: ATA-6: WDC WD800JD-75JNC0, 06.01C06, max UDMA/100
[    2.157177] ata3.00: 156250000 sectors, multi 0: LBA 
[    2.157839] ata3.00: LPM support broken, forcing max_power
[    2.157915] ata3.00: configured for UDMA/100
[    2.166541] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.168175] scsi 2:0:0:0: Direct-Access     ATA      WDC WD800JD-75JN 1C06 PQ: 0 ANSI: 5
[    2.180649] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L633A, D300, max UDMA/100
[    2.180652] ata4.00: applying bridge limits
[    2.194259] ata4.00: configured for UDMA/100
[    2.198444] scsi 3:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L633A D300 PQ: 0 ANSI: 5
[    2.206541] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    2.267070] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.267077] sd 2:0:0:0: [sda] Write Protect is off
[    2.267079] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.267090] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.306169] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.306171] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.306411] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.310566]  sda: sda1 sda2
[    2.310881] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.390565] usb 4-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.01
[    2.390569] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.390571] usb 4-2: Product: USB Receiver
[    2.390574] usb 4-2: Manufacturer: Logitech
[    2.401605] hidraw: raw HID events driver (C) Jiri Kosina
[    2.413630] usbcore: registered new interface driver usbhid
[    2.413631] usbhid: USB HID core driver
[    2.418392] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input2
[    2.533094] input: Logitech Unifying Device. Wireless PID:401b Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input2
[    2.533138] hid-generic 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-0000:00:1a.1-2:1
[    2.535216] input: Logitech Unifying Device. Wireless PID:4016 Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input6
[    2.535268] input: Logitech Unifying Device. Wireless PID:4016 Consumer Control as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input7
[    2.535300] input: Logitech Unifying Device. Wireless PID:4016 System Control as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input8
[    2.535336] hid-generic 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-0000:00:1a.1-2:2
[    2.546644] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input12
[    2.546685] logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:1a.1-2:1
[    2.555286] random: fast init done
[    2.630754] input: Logitech K330 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input13
[    2.630797] logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1a.1-2:2
[    3.641894] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.174535] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.189951] systemd[1]: Detected architecture x86-64.
[    5.218468] systemd[1]: Set hostname to <wakizashi>.
[    5.330759] random: crng init done
[    5.924445] systemd-fstab-generator[259]: x-systemd.device-timeout ignored for zulfiqar:/mnt/tank/documents
[    5.924586] systemd-fstab-generator[259]: x-systemd.device-timeout ignored for zulfiqar:/mnt/tank/media
[    5.924681] systemd-fstab-generator[259]: x-systemd.device-timeout ignored for zulfiqar:/mnt/tank/memories
[    5.924774] systemd-fstab-generator[259]: x-systemd.device-timeout ignored for zulfiqar:/mnt/tank/work
[    7.103716] systemd[1]: /etc/systemd/system/confBackup.service:8: Unknown section 'Insall'. Ignoring.
[    7.111888] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.113046] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.118557] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.118775] systemd[1]: Listening on udev Kernel Socket.
[    7.118955] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.119097] systemd[1]: Reached target Swap.
[    7.206555] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    7.408743] audit: type=1130 audit(1542814644.724:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.409490] audit: type=1130 audit(1542814644.724:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.530800] audit: type=1130 audit(1542814644.848:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.531086] audit: type=1130 audit(1542814644.848:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.542629] audit: type=1130 audit(1542814644.858:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.545867] audit: type=1130 audit(1542814644.861:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.612113] systemd-journald[273]: Received request to flush runtime journal from PID 1
[    7.635930] audit: type=1130 audit(1542814644.951:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.708262] audit: type=1130 audit(1542814645.024:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.939052] systemd-journald[273]: File /var/log/journal/78bff6d4991343a1919a2457f9de0bb2/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    8.218151] audit: type=1130 audit(1542814645.534:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.241768] audit: type=1130 audit(1542814646.558:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.890952] parport_pc 00:03: reported by Plug and Play ACPI
[    9.891011] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[    9.932340] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    9.932341] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    9.933019] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   10.034650] input: PC Speaker as /devices/platform/pcspkr/input/input14
[   10.045628] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20180810/utaddress-213)
[   10.045635] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20180810/utaddress-213)
[   10.045639] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20180810/utaddress-213)
[   10.045643] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.045645] ACPI Warning: SystemIO range 0x00000000000008B0-0x00000000000008BF conflicts with OpRegion 0x00000000000008B8-0x00000000000008BB (\GIC2) (20180810/utaddress-213)
[   10.045649] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.045650] ACPI Warning: SystemIO range 0x0000000000000880-0x00000000000008AF conflicts with OpRegion 0x000000000000088C-0x000000000000088F (\GIC1) (20180810/utaddress-213)
[   10.045654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.045654] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.081968] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.164499] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.267401] mei_wdt mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:01: cannot connect
[   10.269046] mei_wdt mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:01: Could not enable cl device
[   10.270335] mei_wdt: probe of mei::05b79a6f-4628-4d7f-899d-a91514cb32ab:01 failed with error -5
[   10.284342] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:c9:75:e2:cb
[   10.284348] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   10.284366] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: 1051FF-0FF
[   10.325276] ppdev: user-space parallel port driver
[   10.332887] iTCO_vendor_support: vendor-support=0
[   10.366549] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[   10.367891] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
[   10.379823] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.379887] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   10.533179] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[   10.616940] intel_powerclamp: No package C-state available
[   10.657646] intel_powerclamp: No package C-state available
[   10.770872] mousedev: PS/2 mouse device common for all mice
[   11.143954] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[   11.143956] snd_hda_codec_analog hdaudioC0D0:    speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[   11.143958] snd_hda_codec_analog hdaudioC0D0:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   11.143960] snd_hda_codec_analog hdaudioC0D0:    mono: mono_out=0x0
[   11.143961] snd_hda_codec_analog hdaudioC0D0:    inputs:
[   11.143963] snd_hda_codec_analog hdaudioC0D0:      Mic=0x14
[   11.143965] snd_hda_codec_analog hdaudioC0D0:      Line=0x15
[   11.155799] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   11.156475] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   11.156566] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   11.156719] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   11.156783] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   12.317939] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[   12.429339] kauditd_printk_skb: 2 callbacks suppressed
[   12.429341] audit: type=1130 audit(1542814649.744:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.441708] audit: type=1127 audit(1542814649.758:15): pid=331 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   12.462932] audit: type=1130 audit(1542814649.778:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.509608] audit: type=1130 audit(1542814649.828:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=smartd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.517638] audit: type=1130 audit(1542814649.834:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.520808] audit: type=1130 audit(1542814649.838:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.852700] 8021q: 802.1Q VLAN Support v1.8
[   13.041201] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   13.045458] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   13.045501] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   13.045503] cfg80211: failed to load regulatory.db
[   13.793913] audit: type=1130 audit(1542814651.111:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.836577] audit: type=1130 audit(1542814651.154:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.859616] audit: type=1130 audit(1542814651.174:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.862876] audit: type=1130 audit(1542814651.178:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.876762] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   15.910721] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   15.910856] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   16.102572] logitech-hidpp-device 0003:046D:4016.0005: HID++ 2.0 device connected.
[   19.773945] audit: type=1006 audit(1542814657.094:24): pid=381 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   19.878231] audit: type=1130 audit(1542814657.194:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.893902] audit: type=1006 audit(1542814657.211:26): pid=389 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   20.333228] audit: type=1130 audit(1542814657.648:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Another thing is that once I started getting these "restarts" -- I got SMART errors on my disk and I got emailed about the errors
SMART error: Note the Current Pending Sector went from 0 to 1

########## SMART status report summary for all drives ##########

+------+---------------+----+-----+-----+-----+-------+-------+--------+------+------+------+-------+----+
|Device|Serial         |Temp|Power|Start|Spin |ReAlloc|Current|Offline |UDMA  |Seek  |High  |Command|Last|
|      |               |    |On   |Stop |Retry|Sectors|Pending|Uncorrec|CRC   |Errors|Fly   |Timeout|Test|
|      |               |    |Hours|Count|Count|       |Sectors|Sectors |Errors|      |Writes|Count  |Age |
+------+---------------+----+-----+-----+-----+-------+-------+--------+------+------+------+-------+----+
|sda ? |WD-WMAM96464283| 36 |60449| 2311|    0|      0|      1|       0|     0|   N/A|   N/A|    N/A|   0|
+------+---------------+----+-----+-----+-----+-------+-------+--------+------+------+------+-------+----+



########## SMART status report for sda drive (Western Digital Caviar: WD-WMAM96464283) ##########
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.2-arch1-1-ARCH] (local build)

SMART overall-health self-assessment test result: PASSED

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   166   162   021    Pre-fail  Always       -       2683
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2311
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   018   018   000    Old_age   Always       -       60449
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1862
194 Temperature_Celsius     0x0022   107   077   000    Old_age   Always       -       36
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

No Errors Logged

Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
Extended offline    Completed: read failure       90%     60446         391155

I also got these SMART error emails
Current Pending Sector error

SMART error (CurrentPendingSector) detected on host: wakizashi
	
Mon, Nov 19, 6:51 PM (11 days ago)
	
This message was generated by the smartd daemon running on:

   host name:  wakizashi
   DNS domain: localdomain

The following warning/error was logged by the smartd daemon:

Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors

Device info:
WDC WD800JD-75JNC0, S/N:WD-WMAM96464283, FW:06.01C06, 80.0 GB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
No additional messages about this problem will be sent.

SelfTest error

SMART error (SelfTest) detected on host: wakizashi
	
Mon, Nov 19, 6:52 PM (11 days ago)

This message was generated by the smartd daemon running on:

   host name:  wakizashi
   DNS domain: localdomain

The following warning/error was logged by the smartd daemon:

Device: /dev/sda [SAT], Self-Test Log error count increased from 0 to 1

Device info:
WDC WD800JD-75JNC0, S/N:WD-WMAM96464283, FW:06.01C06, 80.0 GB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
No additional messages about this problem will be sent.

Another SelfTest error

SMART error (SelfTest) detected on host: wakizashi
	
Wed, Nov 21, 3:36 PM (9 days ago)

This message was generated by the smartd daemon running on:

   host name:  wakizashi
   DNS domain: localdomain

The following warning/error was logged by the smartd daemon:

Device: /dev/sda [SAT], Self-Test Log error count increased from 2 to 3

Device info:
WDC WD800JD-75JNC0, S/N:WD-WMAM96464283, FW:06.01C06, 80.0 GB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
No additional messages about this problem will be sent.

Offline Uncorrectable Sector error

SMART error (OfflineUncorrectableSector) detected on host: wakizashi
	
Wed, Nov 21, 12:36 PM (9 days ago)

This message was generated by the smartd daemon running on:

   host name:  wakizashi
   DNS domain: localdomain

The following warning/error was logged by the smartd daemon:

Device: /dev/sda [SAT], 1 Offline uncorrectable sectors

Device info:
WDC WD800JD-75JNC0, S/N:WD-WMAM96464283, FW:06.01C06, 80.0 GB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
No additional messages about this problem will be sent.

However, the SMART error seems to have now gone away after subsequent SMART runs. Here's the latest SMART report

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.4-arch1-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE Serial ATA
Device Model:     WDC WD800JD-75JNC0
Serial Number:    WD-WMAM96464283
Firmware Version: 06.01C06
User Capacity:    80,000,000,000 bytes [80.0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-6 (minor revision not indicated)
Local Time is:    Thu Nov 29 13:08:12 2018 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 2460) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  35) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   165   162   021    Pre-fail  Always       -       2733
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2327
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   018   018   000    Old_age   Always       -       60550
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1878
194 Temperature_Celsius     0x0022   108   077   000    Old_age   Always       -       35
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     60530         -
# 2  Short offline       Completed: read failure       90%     60494         391155
# 3  Short offline       Completed: read failure       90%     60470         391155
# 4  Conveyance offline  Completed: read failure       90%     60468         391155
# 5  Short offline       Completed: read failure       90%     60468         391155
# 6  Short offline       Completed: read failure       80%     60468         391155
# 7  Extended offline    Completed: read failure       90%     60468         391155
# 8  Extended offline    Completed: read failure       90%     60446         391155
# 9  Short offline       Completed: read failure       60%     60443         391155
#10  Short offline       Completed without error       00%     60417         -
#11  Short offline       Completed without error       00%     60393         -
#12  Short offline       Completed without error       00%     60381         -
#13  Short offline       Completed without error       00%     60367         -
#14  Short offline       Completed without error       00%     60333         -
#15  Short offline       Completed without error       00%     60309         -
#16  Short offline       Completed without error       00%     60285         -
#17  Short offline       Completed without error       00%     60271         -
#18  Short offline       Completed without error       00%     60261         -
#19  Short offline       Completed without error       00%     60244         -
#20  Short offline       Completed without error       00%     60232         -
#21  Short offline       Completed without error       00%     60208         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

But the restarts on cold boot remain.

So my question is -- Is it my HDD that is the problem or some other hardware failure? What should I start looking into? This machine is quite old with me having used it for 8 years after buying it used on Craigslist, but if it still works, I would like to extend it's life as long as possible.

Last edited by Inxsible (2018-11-30 15:07:59)


Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#2 2018-12-01 16:35:02

seth
Member
Registered: 2012-09-03
Posts: 8,951

Re: Computer restarts when cold booting

Can you post a journal from a cold boot?
Also, what does "cold" actually mean: full power cycle or full power cycle in the morning after a cold night?

Edit: realizing that I should be more unambigious: could this be a temperature issue?

Last edited by seth (2018-12-01 16:35:54)

Offline

#3 2018-12-01 17:32:18

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 16,276

Re: Computer restarts when cold booting

I have not seen stiction problems with hard drives for a long time, but Seth may be on to something.


Inxsible, always great to see you.  Life treating you well?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#4 2018-12-03 19:04:56

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,108

Re: Computer restarts when cold booting

seth wrote:

Can you post a journal from a cold boot?
Also, what does "cold" actually mean: full power cycle or full power cycle in the morning after a cold night?

Edit: realizing that I should be more unambigious: could this be a temperature issue?

The latter.

It could be related to stiction. not sure though. Are you saying the hdd platters are too cold for the machine to work in the first go around after a cold night?

@Eric, life is good. Busy but good.

Last edited by Inxsible (2018-12-03 19:05:15)


Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#5 2018-12-03 20:51:51

seth
Member
Registered: 2012-09-03
Posts: 8,951

Re: Computer restarts when cold booting

It's not necessarily the HDD, could also be some static build-up or some loose contact in cable that wires the reset button or whatnot.
Though the pending sector would point the HDD.

You could check the behavior when lettinig the system stay at the bootloader for a while before booting and alternatively just heat it up w/ an external power source (aka hair dryer) to get a better idea on whether it's actually a temperature issue or rather related to the long downtime.

Offline

#6 2018-12-05 14:49:46

Inxsible
Forum Fellow
From: Chicago
Registered: 2008-06-09
Posts: 9,108

Re: Computer restarts when cold booting

Sat at the login screen... and same thing happened. It reboots the first time I start after an elongated period of time. Subsequent reboots have no issues.

Next test : Hair dryer


Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Offline

#7 2018-12-06 19:34:41

paulkerry
Member
From: Sheffield, UK
Registered: 2014-10-02
Posts: 374

Re: Computer restarts when cold booting

How about ruling out the hard disk to start off with by disconnecting the hard disk power and SATA cables, then boot and run from a usb boot disk to see if it's your hardware in general?
If you have issues without the hard disk, it could it be the power supply which starts working better when things have warmed up?
Otherwise I'd go for the hard disk being the problem what with the read failures and Power_On_Hours = 60550 (6.9 years!), so you've not done that badly out of it for a basic desktop drive!

Cheers
Paul

Offline

Board footer

Powered by FluxBB