You are not logged in.

#1 2019-09-20 09:05:26

jshand2016
Member
Registered: 2016-01-29
Posts: 25

AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

i have currently done a fresh install of Arch linux.  so far i have been unable to find out why my new laptop Aspire 3 A315-21G-91JL has a screen that flashes occassionally.  Quite an annoying bug.  is there a fix for this issue yet.

i have these opensource drivers installed:

xf86-video-amdgpu
xf86-video-ati

i do not have catalyst installed.

please help me.  i really need a fix for this

ie  for some reason my laptop has two graphics cards APU and Radeon 520 graphics card

Last edited by jshand2016 (2019-09-20 09:10:41)

Offline

#2 2019-09-20 09:25:05

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,963

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

Doesn't work is not an error message, post tangible logs likely journal and xorg logs at least.

FWIW there have been some known reports for issues with radeon on newer kernels, so you might want to properly switch to AMDGPU as a test.

Mod note: Moving to NC...

Offline

#3 2019-09-20 10:07:44

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

not too sure how to use this forum yet.  just learning.  in my computer i have a cpu that is an apu.  i just want to use that APU graphics driver only.  i know the driver is radeon.

Last edited by jshand2016 (2019-09-20 10:28:43)

Offline

#4 2019-09-21 00:51:00

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

after a bit of investigating.  it looks like all the default settings are correct.  however, there was a warning in xorg.log saying:

AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x98e4).

it seems to me that this chipset needs to be added to the ids for the amdgpu driver

Offline

#5 2019-09-21 01:07:24

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

the other settings have used is in the mkinitcpio modules part where i put amdgpu first and radeon second and the did a mkinitcpio -p linux on it.  didn't seem to make much difference.

i have kept all other default settings though.

Offline

#6 2019-09-21 01:47:55

loqs
Member
Registered: 2014-03-06
Posts: 9,247

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

jshand2016 wrote:

after a bit of investigating.  it looks like all the default settings are correct.  however, there was a warning in xorg.log saying:

AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x98e4).

it seems to me that this chipset needs to be added to the ids for the amdgpu driver

The id is not present in https://gitlab.freedesktop.org/mesa/drm … amdgpu.ids
which arch provides or the current upstream master.  You could ask upstream to add it although the strings use appears only to be cosmetic.
Edit:

jshand2016 wrote:

i just want to use that APU graphics driver only.  i know the driver is radeon.

Is the APU not an R2 Mullins which is classed as Sea Islands and supported by amdgpu with the switches V1del linked to?
Please also provide the requested outputs also noted in post #2

Last edited by loqs (2019-09-21 02:05:49)

Offline

#7 2019-09-21 03:34:11

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

i can supply those logs for you, but how do i add them in here?  what's your email address loqs?

the APU is actually an R5 stoney or such like

Offline

#8 2019-09-21 03:38:25

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

i can supply those logs for you, but how do i add them in here?  what's your email address loqs?

the APU is actually an R5 stoney or such like

Offline

#9 2019-09-21 03:39:15

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,963

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

Add them here in [ code ] [ /code ] tags. or to a pastebin site and post the links.

Offline

#10 2019-09-21 03:51:43

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

XORG Log

[    28.672] (--) Log file renamed from "/var/log/Xorg.pid-437.log" to "/var/log/Xorg.0.log"
[    28.706] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    28.706] Build Operating System: Linux Arch Linux
[    28.706] Current Operating System: Linux johns-pc 5.3.0-arch1-1-ARCH #1 SMP PREEMPT Mon Sep 16 03:29:01 UTC 2019 x86_64
[    28.706] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5f08a63d-50bd-4506-a36d-7f57c5d54f01 rw loglevel=3 quiet mitigations=auto radeon.cik_support=0 amdgpu.cik_support=1
[    28.706] Build Date: 30 June 2019  09:52:01AM
[    28.706]  
[    28.706] Current version of pixman: 0.38.4
[    28.706] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    28.706] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.706] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 21 15:48:07 2019
[    28.719] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.817] (==) No Layout section.  Using the first Screen section.
[    28.817] (==) No screen section available. Using defaults.
[    28.817] (**) |-->Screen "Default Screen Section" (0)
[    28.817] (**) |   |-->Monitor "<default monitor>"
[    28.831] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    28.831] (==) Automatically adding devices
[    28.831] (==) Automatically enabling devices
[    28.831] (==) Automatically adding GPU devices
[    28.831] (==) Automatically binding GPU devices
[    28.831] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    28.867] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    28.867] 	Entry deleted from font path.
[    28.918] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    28.918] 	Entry deleted from font path.
[    28.918] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    28.918] 	Entry deleted from font path.
[    28.918] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    28.918] 	Entry deleted from font path.
[    28.918] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    28.918] 	Entry deleted from font path.
[    28.918] (==) FontPath set to:
	/usr/share/fonts/TTF
[    28.918] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.918] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.918] (II) Module ABI versions:
[    28.918] 	X.Org ANSI C Emulation: 0.4
[    28.918] 	X.Org Video Driver: 24.0
[    28.918] 	X.Org XInput driver : 24.1
[    28.918] 	X.Org Server Extension : 10.0
[    28.919] (++) using VT number 1

[    28.919] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    28.920] (II) xfree86: Adding drm device (/dev/dri/card0)
[    28.923] (II) xfree86: Adding drm device (/dev/dri/card1)
[    28.931] (--) PCI:*(0@0:1:0) 1002:98e4:1025:1192 rev 202, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xf0e00000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[    28.931] (--) PCI: (1@0:0:0) 1002:6665:1025:1192 rev 195, Mem @ 0xd0000000/268435456, 0xf0d00000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    28.931] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    28.931] (II) LoadModule: "glx"
[    28.943] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    29.050] (II) Module glx: vendor="X.Org Foundation"
[    29.050] 	compiled for 1.20.5, module version = 1.0.0
[    29.050] 	ABI class: X.Org Server Extension, version 10.0
[    29.050] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[    29.050] 	loading driver: amdgpu
[    29.050] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[    29.050] 	loading driver: amdgpu
[    29.050] (==) Matched amdgpu as autoconfigured driver 0
[    29.050] (==) Matched ati as autoconfigured driver 1
[    29.050] (==) Matched modesetting as autoconfigured driver 2
[    29.050] (==) Matched fbdev as autoconfigured driver 3
[    29.050] (==) Matched vesa as autoconfigured driver 4
[    29.050] (==) Assigned the driver to the xf86ConfigLayout
[    29.050] (II) LoadModule: "amdgpu"
[    29.071] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    29.156] (II) Module amdgpu: vendor="X.Org Foundation"
[    29.156] 	compiled for 1.20.4, module version = 19.0.1
[    29.156] 	Module class: X.Org Video Driver
[    29.156] 	ABI class: X.Org Video Driver, version 24.0
[    29.156] (II) LoadModule: "ati"
[    29.156] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    29.157] (II) Module ati: vendor="X.Org Foundation"
[    29.157] 	compiled for 1.20.4, module version = 19.0.1
[    29.157] 	Module class: X.Org Video Driver
[    29.157] 	ABI class: X.Org Video Driver, version 24.0
[    29.173] (II) LoadModule: "modesetting"
[    29.173] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    29.184] (II) Module modesetting: vendor="X.Org Foundation"
[    29.184] 	compiled for 1.20.5, module version = 1.20.5
[    29.184] 	Module class: X.Org Video Driver
[    29.184] 	ABI class: X.Org Video Driver, version 24.0
[    29.184] (II) LoadModule: "fbdev"
[    29.184] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    29.184] (II) Module fbdev: vendor="X.Org Foundation"
[    29.184] 	compiled for 1.20.0, module version = 0.5.0
[    29.184] 	Module class: X.Org Video Driver
[    29.184] 	ABI class: X.Org Video Driver, version 24.0
[    29.184] (II) LoadModule: "vesa"
[    29.184] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    29.209] (II) Module vesa: vendor="X.Org Foundation"
[    29.209] 	compiled for 1.20.0, module version = 2.4.0
[    29.209] 	Module class: X.Org Video Driver
[    29.209] 	ABI class: X.Org Video Driver, version 24.0
[    29.209] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[    29.209] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    29.209] (II) FBDEV: driver for framebuffer: fbdev
[    29.209] (II) VESA: driver for VESA chipsets: vesa
[    29.209] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[    29.285] (WW) Falling back to old probe method for modesetting
[    29.286] (WW) Falling back to old probe method for fbdev
[    29.286] (II) Loading sub module "fbdevhw"
[    29.286] (II) LoadModule: "fbdevhw"
[    29.286] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    29.292] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.292] 	compiled for 1.20.5, module version = 0.0.2
[    29.292] 	ABI class: X.Org Video Driver, version 24.0
[    29.293] (II) AMDGPU(G0): [KMS] Kernel modesetting enabled.
[    29.293] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    29.293] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    29.293] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    29.293] (==) AMDGPU(0): Default visual is TrueColor
[    29.293] (==) AMDGPU(0): RGB weight 888
[    29.293] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    29.293] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x98e4)
[    29.293] (II) Loading sub module "fb"
[    29.293] (II) LoadModule: "fb"
[    29.293] (II) Loading /usr/lib/xorg/modules/libfb.so
[    29.294] (II) Module fb: vendor="X.Org Foundation"
[    29.294] 	compiled for 1.20.5, module version = 1.0.0
[    29.294] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.294] (II) Loading sub module "dri2"
[    29.294] (II) LoadModule: "dri2"
[    29.294] (II) Module "dri2" already built-in
[    31.642] (II) Loading sub module "glamoregl"
[    31.642] (II) LoadModule: "glamoregl"
[    31.642] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    31.716] (II) Module glamoregl: vendor="X.Org Foundation"
[    31.716] 	compiled for 1.20.5, module version = 1.0.1
[    31.716] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.919] (II) AMDGPU(0): glamor X acceleration enabled on AMD STONEY (DRM 3.33.0, 5.3.0-arch1-1-ARCH, LLVM 8.0.1)
[    31.919] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    31.919] (==) AMDGPU(0): TearFree property default: auto
[    31.919] (==) AMDGPU(0): VariableRefresh: disabled
[    31.919] (II) AMDGPU(0): KMS Pageflipping: enabled
[    31.920] (II) AMDGPU(0): Output eDP has no monitor section
[    31.920] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    31.920] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    31.939] (WW) AMDGPU(0): 3 ZaphodHeads crtcs unavailable. Some outputs will stay off.
[    31.939] (II) AMDGPU(0): EDID for output eDP
[    31.939] (II) AMDGPU(0): Manufacturer: AUO  Model: 70ec  Serial#: 0
[    31.939] (II) AMDGPU(0): Year: 2015  Week: 1
[    31.939] (II) AMDGPU(0): EDID Version: 1.4
[    31.939] (II) AMDGPU(0): Digital Display Input
[    31.939] (II) AMDGPU(0): 6 bits per channel
[    31.939] (II) AMDGPU(0): Digital interface is DisplayPort
[    31.939] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    31.939] (II) AMDGPU(0): Gamma: 2.20
[    31.939] (II) AMDGPU(0): No DPMS capabilities specified
[    31.939] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
[    31.939] (II) AMDGPU(0): First detailed timing is preferred mode
[    31.939] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[    31.939] (II) AMDGPU(0): redX: 0.575 redY: 0.345   greenX: 0.340 greenY: 0.570
[    31.939] (II) AMDGPU(0): blueX: 0.160 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[    31.939] (II) AMDGPU(0): Manufacturer's mask: 0
[    31.939] (II) AMDGPU(0): Supported detailed timing:
[    31.939] (II) AMDGPU(0): clock: 76.3 MHz   Image Size:  344 x 193 mm
[    31.939] (II) AMDGPU(0): h_active: 1366  h_sync: 1374  h_sync_end 1384 h_blank_end 1558 h_border: 0
[    31.939] (II) AMDGPU(0): v_active: 768  v_sync: 771  v_sync_end 772 v_blanking: 816 v_border: 0
[    31.939] (II) AMDGPU(0): Unknown vendor-specific block f
[    31.939] (II) AMDGPU(0):  AUO
[    31.939] (II) AMDGPU(0):  B156XTN07.0
[    31.939] (II) AMDGPU(0): EDID (in hex):
[    31.939] (II) AMDGPU(0): 	00ffffffffffff0006afec7000000000
[    31.939] (II) AMDGPU(0): 	01190104952213780250259358579229
[    31.939] (II) AMDGPU(0): 	22505400000001010101010101010101
[    31.939] (II) AMDGPU(0): 	010101010101ce1d56c050003030080a
[    31.939] (II) AMDGPU(0): 	310058c1100000180000000f00000000
[    31.939] (II) AMDGPU(0): 	00000000000000000020000000fe0041
[    31.939] (II) AMDGPU(0): 	554f0a202020202020202020000000fe
[    31.939] (II) AMDGPU(0): 	004231353658544e30372e30200a0014
[    31.939] (II) AMDGPU(0): Printing probed modes for output eDP
[    31.939] (II) AMDGPU(0): Modeline "1366x768"x60.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[    31.939] (II) AMDGPU(0): Modeline "1280x720"x60.0   76.30  1280 1374 1384 1558  720 771 772 816 -hsync -vsync (49.0 kHz e)
[    31.939] (II) AMDGPU(0): Modeline "1024x768"x60.0   76.30  1024 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz e)
[    31.939] (II) AMDGPU(0): Modeline "800x600"x60.0   76.30  800 1374 1384 1558  600 771 772 816 -hsync -vsync (49.0 kHz e)
[    31.939] (II) AMDGPU(0): Modeline "640x480"x60.0   76.30  640 1374 1384 1558  480 771 772 816 -hsync -vsync (49.0 kHz e)
[    31.939] (II) AMDGPU(0): EDID for output HDMI-A-0
[    31.940] (II) AMDGPU(0): EDID for output DisplayPort-0
[    31.940] (II) AMDGPU(0): Output eDP connected
[    31.940] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[    31.940] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[    31.940] (II) AMDGPU(0): Using exact sizes for initial modes
[    31.940] (II) AMDGPU(0): Output eDP using initial mode 1366x768 +0+0
[    31.940] (II) AMDGPU(0): mem size init: gart size :bfd7a000 vram size: s:1f772000 visible:1f772000
[    31.940] (==) AMDGPU(0): DPI set to (96, 96)
[    31.940] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    31.940] (II) Loading sub module "ramdac"
[    31.940] (II) LoadModule: "ramdac"
[    31.940] (II) Module "ramdac" already built-in
[    31.940] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32
[    31.940] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    31.940] (==) AMDGPU(G0): Default visual is TrueColor
[    31.940] (==) AMDGPU(G0): RGB weight 888
[    31.940] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[    31.940] (--) AMDGPU(G0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x6665)
[    31.940] (II) Loading sub module "fb"
[    31.940] (II) LoadModule: "fb"
[    31.940] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.940] (II) Module fb: vendor="X.Org Foundation"
[    31.940] 	compiled for 1.20.5, module version = 1.0.0
[    31.940] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.940] (II) Loading sub module "dri2"
[    31.940] (II) LoadModule: "dri2"
[    31.940] (II) Module "dri2" already built-in
[    31.996] (II) Loading sub module "glamoregl"
[    31.996] (II) LoadModule: "glamoregl"
[    31.996] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    31.996] (II) Module glamoregl: vendor="X.Org Foundation"
[    31.996] 	compiled for 1.20.5, module version = 1.0.1
[    31.996] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.059] (II) AMDGPU(G0): glamor X acceleration enabled on AMD HAINAN (DRM 3.33.0, 5.3.0-arch1-1-ARCH, LLVM 8.0.1)
[    32.059] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[    32.059] (==) AMDGPU(G0): TearFree property default: auto
[    32.059] (II) AMDGPU(G0): mem size init: gart size :bfee5000 vram size: s:7ff7d000 visible:ff7d000
[    32.059] (==) AMDGPU(G0): DPI set to (96, 96)
[    32.059] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[    32.059] (II) Loading sub module "ramdac"
[    32.059] (II) LoadModule: "ramdac"
[    32.059] (II) Module "ramdac" already built-in
[    32.059] (II) UnloadModule: "modesetting"
[    32.059] (II) Unloading modesetting
[    32.059] (II) UnloadModule: "fbdev"
[    32.059] (II) Unloading fbdev
[    32.059] (II) UnloadSubModule: "fbdevhw"
[    32.059] (II) Unloading fbdevhw
[    32.059] (II) UnloadModule: "vesa"
[    32.059] (II) Unloading vesa
[    32.060] (II) AMDGPU(G0): [DRI2] Setup complete
[    32.060] (II) AMDGPU(G0): [DRI2]   DRI driver: radeonsi
[    32.060] (II) AMDGPU(G0): [DRI2]   VDPAU driver: radeonsi
[    32.060] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[    32.078] (==) AMDGPU(G0): Backing store enabled
[    32.078] (II) AMDGPU(G0): Direct rendering enabled
[    32.161] (II) AMDGPU(G0): Use GLAMOR acceleration.
[    32.161] (II) AMDGPU(G0): Acceleration enabled
[    32.161] (==) AMDGPU(G0): DPMS enabled
[    32.161] (==) AMDGPU(G0): Silken mouse disabled
[    32.162] (II) AMDGPU(0): [DRI2] Setup complete
[    32.162] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    32.162] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    32.162] (II) AMDGPU(0): Front buffer pitch: 5504 bytes
[    32.162] (II) AMDGPU(0): SYNC extension fences enabled
[    32.162] (II) AMDGPU(0): Present extension enabled
[    32.162] (==) AMDGPU(0): DRI3 enabled
[    32.162] (==) AMDGPU(0): Backing store enabled
[    32.162] (II) AMDGPU(0): Direct rendering enabled
[    32.188] (II) AMDGPU(0): Use GLAMOR acceleration.
[    32.188] (II) AMDGPU(0): Acceleration enabled
[    32.188] (==) AMDGPU(0): DPMS enabled
[    32.188] (==) AMDGPU(0): Silken mouse disabled
[    32.188] (II) AMDGPU(0): Set up textured video (glamor)
[    32.206] (II) Initializing extension Generic Event Extension
[    32.206] (II) Initializing extension SHAPE
[    32.206] (II) Initializing extension MIT-SHM
[    32.206] (II) Initializing extension XInputExtension
[    32.207] (II) Initializing extension XTEST
[    32.207] (II) Initializing extension BIG-REQUESTS
[    32.207] (II) Initializing extension SYNC
[    32.207] (II) Initializing extension XKEYBOARD
[    32.207] (II) Initializing extension XC-MISC
[    32.208] (II) Initializing extension SECURITY
[    32.208] (II) Initializing extension XFIXES
[    32.208] (II) Initializing extension RENDER
[    32.208] (II) Initializing extension RANDR
[    32.208] (II) Initializing extension COMPOSITE
[    32.209] (II) Initializing extension DAMAGE
[    32.209] (II) Initializing extension MIT-SCREEN-SAVER
[    32.209] (II) Initializing extension DOUBLE-BUFFER
[    32.209] (II) Initializing extension RECORD
[    32.209] (II) Initializing extension DPMS
[    32.210] (II) Initializing extension Present
[    32.210] (II) Initializing extension DRI3
[    32.210] (II) Initializing extension X-Resource
[    32.210] (II) Initializing extension XVideo
[    32.210] (II) Initializing extension XVideo-MotionCompensation
[    32.210] (II) Initializing extension GLX
[    32.233] (II) AIGLX: Loaded and initialized radeonsi
[    32.233] (II) GLX: Initialized DRI2 GL provider for screen 0
[    32.233] (II) Initializing extension XFree86-VidModeExtension
[    32.233] (II) Initializing extension XFree86-DGA
[    32.233] (II) Initializing extension XFree86-DRI
[    32.233] (II) Initializing extension DRI2
[    32.238] (II) AMDGPU(0): Setting screen physical size to 361 x 203
[    32.683] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.684] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.684] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.684] (II) LoadModule: "libinput"
[    32.684] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    32.725] (II) Module libinput: vendor="X.Org Foundation"
[    32.725] 	compiled for 1.20.5, module version = 0.29.0
[    32.725] 	Module class: X.Org XInput Driver
[    32.725] 	ABI class: X.Org XInput driver, version 24.1
[    32.725] (II) Using input driver 'libinput' for 'Power Button'
[    32.725] (**) Power Button: always reports core events
[    32.725] (**) Option "Device" "/dev/input/event3"
[    32.725] (**) Option "_source" "server/udev"
[    32.731] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    32.731] (II) event3  - Power Button: device is a keyboard
[    32.731] (II) event3  - Power Button: device removed
[    32.745] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    32.745] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.747] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    32.747] (II) event3  - Power Button: device is a keyboard
[    32.748] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    32.748] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.748] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    32.748] (II) Using input driver 'libinput' for 'Video Bus'
[    32.748] (**) Video Bus: always reports core events
[    32.748] (**) Option "Device" "/dev/input/event4"
[    32.748] (**) Option "_source" "server/udev"
[    32.749] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    32.749] (II) event4  - Video Bus: device is a keyboard
[    32.749] (II) event4  - Video Bus: device removed
[    32.775] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    32.775] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    32.777] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    32.777] (II) event4  - Video Bus: device is a keyboard
[    32.778] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    32.778] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.778] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    32.778] (II) Using input driver 'libinput' for 'Video Bus'
[    32.778] (**) Video Bus: always reports core events
[    32.778] (**) Option "Device" "/dev/input/event5"
[    32.778] (**) Option "_source" "server/udev"
[    32.780] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    32.780] (II) event5  - Video Bus: device is a keyboard
[    32.780] (II) event5  - Video Bus: device removed
[    32.812] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:01/input/input5/event5"
[    32.812] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    32.814] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[    32.814] (II) event5  - Video Bus: device is a keyboard
[    32.815] (II) config/udev: Adding input device Acer Wireless Radio Control (/dev/input/event11)
[    32.815] (**) Acer Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[    32.815] (**) Acer Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    32.815] (II) Using input driver 'libinput' for 'Acer Wireless Radio Control'
[    32.815] (**) Acer Wireless Radio Control: always reports core events
[    32.815] (**) Option "Device" "/dev/input/event11"
[    32.815] (**) Option "_source" "server/udev"
[    32.817] (II) event11 - Acer Wireless Radio Control: is tagged by udev as: Keyboard
[    32.817] (II) event11 - Acer Wireless Radio Control: device is a keyboard
[    32.817] (II) event11 - Acer Wireless Radio Control: device removed
[    32.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/10251229:00/input/input29/event11"
[    32.849] (II) XINPUT: Adding extended input device "Acer Wireless Radio Control" (type: KEYBOARD, id 9)
[    32.851] (II) event11 - Acer Wireless Radio Control: is tagged by udev as: Keyboard
[    32.851] (II) event11 - Acer Wireless Radio Control: device is a keyboard
[    32.851] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    32.852] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.852] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.852] (II) Using input driver 'libinput' for 'Power Button'
[    32.852] (**) Power Button: always reports core events
[    32.852] (**) Option "Device" "/dev/input/event0"
[    32.852] (**) Option "_source" "server/udev"
[    32.853] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    32.853] (II) event0  - Power Button: device is a keyboard
[    32.853] (II) event0  - Power Button: device removed
[    32.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    32.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[    32.870] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    32.870] (II) event0  - Power Button: device is a keyboard
[    32.871] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    32.871] (II) No input driver specified, ignoring this device.
[    32.871] (II) This device may have been added with another device file.
[    32.872] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    32.872] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.872] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    32.872] (II) Using input driver 'libinput' for 'Sleep Button'
[    32.872] (**) Sleep Button: always reports core events
[    32.872] (**) Option "Device" "/dev/input/event1"
[    32.872] (**) Option "_source" "server/udev"
[    32.873] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    32.873] (II) event1  - Sleep Button: device is a keyboard
[    32.873] (II) event1  - Sleep Button: device removed
[    32.892] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    32.892] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 11)
[    32.894] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    32.894] (II) event1  - Sleep Button: device is a keyboard
[    32.895] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[    32.895] (II) No input driver specified, ignoring this device.
[    32.895] (II) This device may have been added with another device file.
[    32.896] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[    32.896] (II) No input driver specified, ignoring this device.
[    32.896] (II) This device may have been added with another device file.
[    32.896] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event15)
[    32.896] (II) No input driver specified, ignoring this device.
[    32.896] (II) This device may have been added with another device file.
[    32.897] (II) config/udev: Adding input device Logitech Wireless Keyboard PID:4023 (/dev/input/event7)
[    32.898] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "evdev keyboard catchall"
[    32.898] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "libinput keyboard catchall"
[    32.898] (II) Using input driver 'libinput' for 'Logitech Wireless Keyboard PID:4023'
[    32.898] (**) Logitech Wireless Keyboard PID:4023: always reports core events
[    32.898] (**) Option "Device" "/dev/input/event7"
[    32.898] (**) Option "_source" "server/udev"
[    32.900] (II) event7  - Logitech Wireless Keyboard PID:4023: is tagged by udev as: Keyboard
[    32.900] (II) event7  - Logitech Wireless Keyboard PID:4023: device is a keyboard
[    32.900] (II) event7  - Logitech Wireless Keyboard PID:4023: device removed
[    32.912] (II) libinput: Logitech Wireless Keyboard PID:4023: needs a virtual subdevice
[    32.912] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input24/event7"
[    32.912] (II) XINPUT: Adding extended input device "Logitech Wireless Keyboard PID:4023" (type: MOUSE, id 12)
[    32.912] (**) Option "AccelerationScheme" "none"
[    32.912] (**) Logitech Wireless Keyboard PID:4023: (accel) selected scheme none/0
[    32.912] (**) Logitech Wireless Keyboard PID:4023: (accel) acceleration factor: 2.000
[    32.912] (**) Logitech Wireless Keyboard PID:4023: (accel) acceleration threshold: 4
[    32.915] (II) event7  - Logitech Wireless Keyboard PID:4023: is tagged by udev as: Keyboard
[    32.915] (II) event7  - Logitech Wireless Keyboard PID:4023: device is a keyboard
[    32.916] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/event8)
[    32.916] (**) Logitech Wireless Mouse: Applying InputClass "evdev pointer catchall"
[    32.916] (**) Logitech Wireless Mouse: Applying InputClass "libinput pointer catchall"
[    32.916] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse'
[    32.917] (**) Logitech Wireless Mouse: always reports core events
[    32.917] (**) Option "Device" "/dev/input/event8"
[    32.917] (**) Option "_source" "server/udev"
[    32.919] (II) event8  - Logitech Wireless Mouse: is tagged by udev as: Mouse
[    32.919] (II) event8  - Logitech Wireless Mouse: device is a pointer
[    32.919] (II) event8  - Logitech Wireless Mouse: device removed
[    32.952] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input25/event8"
[    32.952] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse" (type: MOUSE, id 13)
[    32.952] (**) Option "AccelerationScheme" "none"
[    32.952] (**) Logitech Wireless Mouse: (accel) selected scheme none/0
[    32.952] (**) Logitech Wireless Mouse: (accel) acceleration factor: 2.000
[    32.952] (**) Logitech Wireless Mouse: (accel) acceleration threshold: 4
[    32.955] (II) event8  - Logitech Wireless Mouse: is tagged by udev as: Mouse
[    32.955] (II) event8  - Logitech Wireless Mouse: device is a pointer
[    32.956] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/mouse0)
[    32.957] (II) No input driver specified, ignoring this device.
[    32.957] (II) This device may have been added with another device file.
[    32.958] (II) config/udev: Adding input device VGA WebCam: VGA WebCam (/dev/input/event16)
[    32.958] (**) VGA WebCam: VGA WebCam: Applying InputClass "evdev keyboard catchall"
[    32.958] (**) VGA WebCam: VGA WebCam: Applying InputClass "libinput keyboard catchall"
[    32.958] (II) Using input driver 'libinput' for 'VGA WebCam: VGA WebCam'
[    32.958] (**) VGA WebCam: VGA WebCam: always reports core events
[    32.958] (**) Option "Device" "/dev/input/event16"
[    32.958] (**) Option "_source" "server/udev"
[    32.960] (II) event16 - VGA WebCam: VGA WebCam: is tagged by udev as: Keyboard
[    32.960] (II) event16 - VGA WebCam: VGA WebCam: device is a keyboard
[    32.960] (II) event16 - VGA WebCam: VGA WebCam: device removed
[    32.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input38/event16"
[    32.985] (II) XINPUT: Adding extended input device "VGA WebCam: VGA WebCam" (type: KEYBOARD, id 14)
[    32.988] (II) event16 - VGA WebCam: VGA WebCam: is tagged by udev as: Keyboard
[    32.988] (II) event16 - VGA WebCam: VGA WebCam: device is a keyboard
[    32.989] (II) config/udev: Adding input device ELAN0501:00 04F3:3060 Touchpad (/dev/input/event9)
[    32.989] (**) ELAN0501:00 04F3:3060 Touchpad: Applying InputClass "evdev touchpad catchall"
[    32.989] (**) ELAN0501:00 04F3:3060 Touchpad: Applying InputClass "libinput touchpad catchall"
[    32.989] (**) ELAN0501:00 04F3:3060 Touchpad: Applying InputClass "touchpad catchall"
[    32.989] (**) ELAN0501:00 04F3:3060 Touchpad: Applying InputClass "Default clickpad buttons"
[    32.989] (II) LoadModule: "synaptics"
[    32.989] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    33.039] (II) Module synaptics: vendor="X.Org Foundation"
[    33.039] 	compiled for 1.20.0, module version = 1.9.1
[    33.039] 	Module class: X.Org XInput Driver
[    33.039] 	ABI class: X.Org XInput driver, version 24.1
[    33.039] (II) Using input driver 'synaptics' for 'ELAN0501:00 04F3:3060 Touchpad'
[    33.039] (**) ELAN0501:00 04F3:3060 Touchpad: always reports core events
[    33.039] (**) Option "Device" "/dev/input/event9"
[    33.069] (II) synaptics: ELAN0501:00 04F3:3060 Touchpad: found clickpad property
[    33.069] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: x-axis range 0 - 3234 (res 32)
[    33.069] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: y-axis range 0 - 2342 (res 32)
[    33.069] (II) synaptics: ELAN0501:00 04F3:3060 Touchpad: device does not report pressure, will use touch data.
[    33.069] (II) synaptics: ELAN0501:00 04F3:3060 Touchpad: device does not report finger width.
[    33.069] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: buttons: left double triple
[    33.069] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: Vendor 0x4f3 Product 0x3060
[    33.069] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: invalid pressure range.  defaulting to 0 - 255
[    33.069] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: invalid finger width range.  defaulting to 0 - 15
[    33.069] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    33.069] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: touchpad found
[    33.069] (**) ELAN0501:00 04F3:3060 Touchpad: always reports core events
[    33.099] (**) Option "config_info" "udev:/sys/devices/platform/AMD0010:00/i2c-0/i2c-ELAN0501:00/0018:04F3:3060.0005/input/input33/event9"
[    33.099] (II) XINPUT: Adding extended input device "ELAN0501:00 04F3:3060 Touchpad" (type: TOUCHPAD, id 15)
[    33.099] (**) synaptics: ELAN0501:00 04F3:3060 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    33.099] (**) synaptics: ELAN0501:00 04F3:3060 Touchpad: (accel) MaxSpeed is now 1.75
[    33.099] (**) synaptics: ELAN0501:00 04F3:3060 Touchpad: (accel) AccelFactor is now 0.050
[    33.099] (**) ELAN0501:00 04F3:3060 Touchpad: (accel) keeping acceleration scheme 1
[    33.099] (**) ELAN0501:00 04F3:3060 Touchpad: (accel) acceleration profile 1
[    33.099] (**) ELAN0501:00 04F3:3060 Touchpad: (accel) acceleration factor: 2.000
[    33.099] (**) ELAN0501:00 04F3:3060 Touchpad: (accel) acceleration threshold: 4
[    33.099] (--) synaptics: ELAN0501:00 04F3:3060 Touchpad: touchpad found
[    33.100] (II) config/udev: Adding input device ELAN0501:00 04F3:3060 Touchpad (/dev/input/mouse1)
[    33.100] (**) ELAN0501:00 04F3:3060 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    33.101] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[    33.101] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    33.101] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    33.101] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    33.101] (**) AT Translated Set 2 keyboard: always reports core events
[    33.101] (**) Option "Device" "/dev/input/event6"
[    33.101] (**) Option "_source" "server/udev"
[    33.103] (II) event6  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    33.103] (II) event6  - AT Translated Set 2 keyboard: device is a keyboard
[    33.104] (II) event6  - AT Translated Set 2 keyboard: device removed
[    33.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[    33.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[    33.121] (II) event6  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    33.121] (II) event6  - AT Translated Set 2 keyboard: device is a keyboard
[    33.123] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[    33.123] (II) No input driver specified, ignoring this device.
[    33.123] (II) This device may have been added with another device file.
[    33.123] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[    33.123] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    33.123] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    33.123] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[    33.123] (**) Acer WMI hotkeys: always reports core events
[    33.123] (**) Option "Device" "/dev/input/event10"
[    33.123] (**) Option "_source" "server/udev"
[    33.124] (II) event10 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    33.124] (II) event10 - Acer WMI hotkeys: device is a keyboard
[    33.124] (II) event10 - Acer WMI hotkeys: device removed
[    33.142] (**) Option "config_info" "udev:/sys/devices/virtual/input/input34/event10"
[    33.142] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 17)
[    33.143] (II) event10 - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    33.143] (II) event10 - Acer WMI hotkeys: device is a keyboard
[    33.154] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "evdev keyboard catchall"
[    33.154] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "libinput keyboard catchall"
[    33.154] (II) Using input driver 'libinput' for 'Logitech Wireless Keyboard PID:4023'
[    33.154] (**) Logitech Wireless Keyboard PID:4023: always reports core events
[    33.154] (**) Option "Device" "/dev/input/event7"
[    33.154] (**) Option "_source" "_driver/libinput"
[    33.154] (II) libinput: Logitech Wireless Keyboard PID:4023: is a virtual subdevice
[    33.154] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input24/event7"
[    33.154] (II) XINPUT: Adding extended input device "Logitech Wireless Keyboard PID:4023" (type: KEYBOARD, id 18)
[    33.235] (EE) Failed to open authorization file "/var/run/sddm/{2c2c2faf-f7c4-481f-b753-ef6e9b33c724}": No such file or directory
[    56.511] (II) AMDGPU(0): EDID vendor "AUO", prod id 28908
[    56.511] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    56.511] (II) AMDGPU(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
[    61.808] (II) AMDGPU(0): EDID vendor "AUO", prod id 28908
[    61.808] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    61.808] (II) AMDGPU(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)

Last edited by jshand2016 (2019-09-21 03:54:23)

Offline

#11 2019-09-21 03:56:26

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

i still get the screen flickers.  i don't have strane artifacts, just blinks from time to time.

Offline

#12 2019-09-21 04:05:32

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

dmesg log

[    0.000000] Linux version 5.3.0-arch1-1-ARCH (builduser@heftig-1042915) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Mon Sep 16 03:29:01 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5f08a63d-50bd-4506-a36d-7f57c5d54f01 rw loglevel=3 quiet mitigations=auto radeon.cik_support=0 amdgpu.cik_support=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c93b5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c93b6000-0x00000000c9db5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c9db6000-0x00000000cefbefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cefbf000-0x00000000cf8befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf8bf000-0x00000000cfbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfbbf000-0x00000000cfbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfbff000-0x00000000cfbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfc00000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0a00000-0x00000000f0afffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000020effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000020f000000-0x000000022effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: Acer Aspire A315-21G/Squirtle_SR, BIOS V1.12 06/19/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1796.671 MHz processor
[    0.013993] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.013996] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.014003] last_pfn = 0x20f000 max_arch_pfn = 0x400000000
[    0.014009] MTRR default type: uncachable
[    0.014011] MTRR fixed ranges enabled:
[    0.014012]   00000-9FFFF write-back
[    0.014013]   A0000-BFFFF uncachable
[    0.014014]   C0000-FFFFF write-through
[    0.014015] MTRR variable ranges enabled:
[    0.014017]   0 base 000000000000 mask FFFF80000000 write-back
[    0.014019]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.014020]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.014022]   3 base 0000FF800000 mask FFFFFF800000 write-protect
[    0.014022]   4 disabled
[    0.014023]   5 disabled
[    0.014024]   6 disabled
[    0.014025]   7 disabled
[    0.014026] TOM2: 000000022f000000 aka 8944M
[    0.014331] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.014494] last_pfn = 0xcfc00 max_arch_pfn = 0x400000000
[    0.024785] check: Scanning 1 areas for low memory corruption
[    0.024791] Using GB pages for direct mapping
[    0.024794] BRK [0x54401000, 0x54401fff] PGTABLE
[    0.024797] BRK [0x54402000, 0x54402fff] PGTABLE
[    0.024798] BRK [0x54403000, 0x54403fff] PGTABLE
[    0.024850] BRK [0x54404000, 0x54404fff] PGTABLE
[    0.024852] BRK [0x54405000, 0x54405fff] PGTABLE
[    0.025368] BRK [0x54406000, 0x54406fff] PGTABLE
[    0.025529] BRK [0x54407000, 0x54407fff] PGTABLE
[    0.025620] BRK [0x54408000, 0x54408fff] PGTABLE
[    0.025737] RAMDISK: [mem 0x35157000-0x368a2fff]
[    0.025743] ACPI: Early table checksum verification disabled
[    0.025750] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.025754] ACPI: XSDT 0x00000000CFBD6188 0000E4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.025762] ACPI: FACP 0x00000000CFBF9000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025769] ACPI: DSDT 0x00000000CFBE8000 00910A (v01 ACRSYS ACRPRDCT 00040000 1025 00040000)
[    0.025773] ACPI: FACS 0x00000000CFB86000 000040
[    0.025776] ACPI: MSDM 0x00000000CFBFC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025780] ACPI: BOOT 0x00000000CFBFA000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025783] ACPI: HPET 0x00000000CFBF8000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025786] ACPI: MCFG 0x00000000CFBF6000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025790] ACPI: WDAT 0x00000000CFBF3000 00017C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025793] ACPI: UEFI 0x00000000CFBE7000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.025796] ACPI: SSDT 0x00000000CFBF5000 00043C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025799] ACPI: IVRS 0x00000000CFBDB000 0000D0 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025802] ACPI: TPM2 0x00000000CFBD8000 000034 (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.025805] ACPI: SSDT 0x00000000CFBD4000 001608 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025808] ACPI: SSDT 0x00000000CFBD1000 00165E (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025811] ACPI: UEFI 0x00000000CFBFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025814] ACPI: SPCR 0x00000000CFBF4000 000050 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025817] ACPI: SSDT 0x00000000CFBE1000 0056D2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.025820] ACPI: CRAT 0x00000000CFBDA000 0002E8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025823] ACPI: SSDT 0x00000000CFBD7000 000174 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025826] ACPI: FPDT 0x00000000CFBD0000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.025829] ACPI: ASF! 0x00000000CFBFB000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025832] ACPI: WDRT 0x00000000CFBF2000 000047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.025835] ACPI: SSDT 0x00000000CFBD9000 000482 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.025838] ACPI: SSDT 0x00000000CFBDC000 004B5B (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.025841] ACPI: APIC 0x00000000CFBF7000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025844] ACPI: SSDT 0x00000000CFBD3000 000B64 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.025855] ACPI: Local APIC address 0xfee00000
[    0.025983] No NUMA configuration found
[    0.025985] Faking a node at [mem 0x0000000000000000-0x000000020effffff]
[    0.025989] NODE_DATA(0) allocated [mem 0x20effa000-0x20effdfff]
[    0.026019] Zone ranges:
[    0.026020]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.026022]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.026023]   Normal   [mem 0x0000000100000000-0x000000020effffff]
[    0.026024]   Device   empty
[    0.026025] Movable zone start for each node
[    0.026026] Early memory node ranges
[    0.026027]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.026028]   node   0: [mem 0x0000000000100000-0x00000000c93b5fff]
[    0.026030]   node   0: [mem 0x00000000c9db6000-0x00000000cefbefff]
[    0.026031]   node   0: [mem 0x00000000cfbff000-0x00000000cfbfffff]
[    0.026031]   node   0: [mem 0x0000000100000000-0x000000020effffff]
[    0.026100] Zeroed struct page in unavailable ranges: 6818 pages
[    0.026101] Initmem setup node 0 [mem 0x0000000000001000-0x000000020effffff]
[    0.026103] On node 0 totalpages: 1955166
[    0.026104]   DMA zone: 64 pages used for memmap
[    0.026105]   DMA zone: 21 pages reserved
[    0.026106]   DMA zone: 3998 pages, LIFO batch:0
[    0.026173]   DMA32 zone: 13143 pages used for memmap
[    0.026174]   DMA32 zone: 841152 pages, LIFO batch:63
[    0.042152]   Normal zone: 17344 pages used for memmap
[    0.042154]   Normal zone: 1110016 pages, LIFO batch:63
[    0.062382] ACPI: PM-Timer IO Port: 0x408
[    0.062385] ACPI: Local APIC address 0xfee00000
[    0.062392] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.062393] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.062394] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.062395] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.062404] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.062408] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[    0.062410] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.062412] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.062414] ACPI: IRQ0 used by override.
[    0.062415] ACPI: IRQ9 used by override.
[    0.062417] Using ACPI (MADT) for SMP configuration information
[    0.062419] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.062423] ACPI: SPCR: SPCR table version 1
[    0.062425] ACPI: SPCR: console: uart,io,0x3f8,115200
[    0.062428] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.062452] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.062454] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.062455] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.062456] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.062458] PM: Registered nosave memory: [mem 0xc93b6000-0xc9db5fff]
[    0.062460] PM: Registered nosave memory: [mem 0xcefbf000-0xcf8befff]
[    0.062460] PM: Registered nosave memory: [mem 0xcf8bf000-0xcfbbefff]
[    0.062461] PM: Registered nosave memory: [mem 0xcfbbf000-0xcfbfefff]
[    0.062463] PM: Registered nosave memory: [mem 0xcfc00000-0xcfffffff]
[    0.062464] PM: Registered nosave memory: [mem 0xd0000000-0xf09fffff]
[    0.062464] PM: Registered nosave memory: [mem 0xf0a00000-0xf0afffff]
[    0.062465] PM: Registered nosave memory: [mem 0xf0b00000-0xf7ffffff]
[    0.062466] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.062466] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.062467] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.062468] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.062469] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.062469] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.062470] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.062471] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[    0.062471] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.062472] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.062473] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.062475] [mem 0xd0000000-0xf09fffff] available for PCI devices
[    0.062477] Booting paravirtualized kernel on bare hardware
[    0.062480] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.202061] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.202763] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.202772] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.202774] pcpu-alloc: [0] 0 1 2 3 
[    0.202801] Built 1 zonelists, mobility grouping on.  Total pages: 1924594
[    0.202803] Policy zone: Normal
[    0.202805] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5f08a63d-50bd-4506-a36d-7f57c5d54f01 rw loglevel=3 quiet mitigations=auto radeon.cik_support=0 amdgpu.cik_support=1
[    0.205095] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.206210] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.206243] mem auto-init: stack:byref_all, heap alloc:off, heap free:off
[    0.223657] Calgary: detecting Calgary via BIOS EBDA area
[    0.223661] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.262600] Memory: 7565924K/7820664K available (12291K kernel code, 1321K rwdata, 3952K rodata, 1632K init, 3548K bss, 254740K reserved, 0K cma-reserved)
[    0.262869] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.262891] ftrace: allocating 37806 entries in 148 pages
[    0.283253] rcu: Preemptible hierarchical RCU implementation.
[    0.283255] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.283256] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    0.283257] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.283258] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.283259]  Tasks RCU enabled.
[    0.283260] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.283261] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.285577] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[    0.285752] rcu:     Offload RCU callbacks from CPUs: (none).
[    0.285938] random: get_random_bytes called from start_kernel+0x3ce/0x5a9 with crng_init=0
[    0.285967] spurious 8259A interrupt: IRQ7.
[    0.285988] Console: colour dummy device 80x25
[    0.285996] printk: console [tty0] enabled
[    0.286028] ACPI: Core revision 20190703
[    0.286264] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.286284] APIC: Switch to symmetric I/O mode setup
[    0.310194] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.326284] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e5e0a94c3, max_idle_ns: 440795207860 ns
[    0.326293] Calibrating delay loop (skipped), value calculated using timer frequency.. 3594.06 BogoMIPS (lpj=5988903)
[    0.326296] pid_max: default: 32768 minimum: 301
[    0.326377] LSM: Security Framework initializing
[    0.326383] Yama: becoming mindful.
[    0.326448] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.326481] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.326704] *** VALIDATE proc ***
[    0.326778] *** VALIDATE cgroup1 ***
[    0.326780] *** VALIDATE cgroup2 ***
[    0.326827] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[    0.326879] LVT offset 1 assigned for vector 0xf9
[    0.326888] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.326889] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.326893] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.326895] Spectre V2 : Mitigation: Full AMD retpoline
[    0.326896] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.326898] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.326900] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.327119] Freeing SMP alternatives memory: 32K
[    0.436633] smpboot: CPU0: AMD A9-9420e RADEON R5, 5 COMPUTE CORES 2C+3G (family: 0x15, model: 0x70, stepping: 0x0)
[    0.456386] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.456394] ... version:                0
[    0.456395] ... bit width:              48
[    0.456396] ... generic registers:      6
[    0.456396] ... value mask:             0000ffffffffffff
[    0.456397] ... max period:             00007fffffffffff
[    0.456398] ... fixed-purpose events:   0
[    0.456398] ... event mask:             000000000000003f
[    0.463042] rcu: Hierarchical SRCU implementation.
[    0.486405] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.493053] smp: Bringing up secondary CPUs ...
[    0.533073] x86: Booting SMP configuration:
[    0.533075] .... node  #0, CPUs:      #1
[    0.535255] smp: Brought up 1 node, 2 CPUs
[    0.535255] smpboot: Max logical packages: 2
[    0.535255] smpboot: Total of 2 processors activated (7189.12 BogoMIPS)
[    0.535255] devtmpfs: initialized
[    0.536357] x86/mm: Memory block size: 128MB
[    0.537311] PM: Registering ACPI NVS region [mem 0xc93b6000-0xc9db5fff] (10485760 bytes)
[    0.537311] PM: Registering ACPI NVS region [mem 0xcf8bf000-0xcfbbefff] (3145728 bytes)
[    0.537311] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.537311] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.537311] pinctrl core: initialized pinctrl subsystem
[    0.537311] PM: RTC time: 03:47:38, date: 2019-09-21
[    0.537311] NET: Registered protocol family 16
[    0.537311] audit: initializing netlink subsys (disabled)
[    0.537311] audit: type=2000 audit(1569037658.229:1): state=initialized audit_enabled=0 res=1
[    0.537311] cpuidle: using governor ladder
[    0.537311] cpuidle: using governor menu
[    0.537311] Simple Boot Flag at 0x44 set to 0x1
[    0.537311] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.537311] ACPI: bus type PCI registered
[    0.537311] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.537311] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.537311] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.537311] PCI: Using configuration type 1 for base access
[    0.540499] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.540499] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.543115] ACPI: Added _OSI(Module Device)
[    0.543116] ACPI: Added _OSI(Processor Device)
[    0.543117] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.543118] ACPI: Added _OSI(Processor Aggregator Device)
[    0.543119] ACPI: Added _OSI(Linux-Dell-Video)
[    0.543120] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.543121] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.559505] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.562060] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.568274] ACPI: EC: EC started
[    0.568276] ACPI: EC: interrupt blocked
[    0.568662] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.568664] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.568666] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.568666] ACPI: Interpreter enabled
[    0.568693] ACPI: (supports S0 S3 S4 S5)
[    0.568695] ACPI: Using IOAPIC for interrupt routing
[    0.568910] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.569315] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.570589] ACPI: Power Resource [WRST] (on)
[    0.571646] ACPI: Power Resource [P0U2] (off)
[    0.571689] ACPI: Power Resource [P3U2] (off)
[    0.572091] ACPI: Power Resource [P0U3] (off)
[    0.572136] ACPI: Power Resource [P3U3] (off)
[    0.573640] ACPI: Power Resource [P0ST] (on)
[    0.573685] ACPI: Power Resource [P3ST] (on)
[    0.574385] ACPI: Power Resource [P0SD] (off)
[    0.574429] ACPI: Power Resource [P3SD] (off)
[    0.578122] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.578129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.578355] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.578564] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.578566] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.578585] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.578734] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cfdff])
[    0.578977] PCI host bridge to bus 0000:00
[    0.578979] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.578981] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.578982] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.578984] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.578985] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.578987] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.578988] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.578989] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.578991] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.578992] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.578993] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.578994] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.578996] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.578997] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.578998] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[    0.578999] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.579002] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.579013] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[    0.579134] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[    0.579262] pci 0000:00:01.0: [1002:98e4] type 00 class 0x030000
[    0.579280] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.579289] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.579294] pci 0000:00:01.0: reg 0x20: [io  0x4000-0x40ff]
[    0.579300] pci 0000:00:01.0: reg 0x24: [mem 0xf0e00000-0xf0e3ffff]
[    0.579306] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.579310] pci 0000:00:01.0: enabling Extended Tags
[    0.579350] pci 0000:00:01.0: supports D1 D2
[    0.579352] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.579464] pci 0000:00:01.1: [1002:15b3] type 00 class 0x040300
[    0.579480] pci 0000:00:01.1: reg 0x10: [mem 0xf0e60000-0xf0e63fff 64bit]
[    0.579503] pci 0000:00:01.1: enabling Extended Tags
[    0.579534] pci 0000:00:01.1: supports D1 D2
[    0.579629] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[    0.579735] pci 0000:00:02.1: [1022:157c] type 01 class 0x060400
[    0.579773] pci 0000:00:02.1: enabling Extended Tags
[    0.579858] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.579964] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
[    0.580002] pci 0000:00:02.2: enabling Extended Tags
[    0.580045] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.580155] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
[    0.580193] pci 0000:00:02.3: enabling Extended Tags
[    0.580234] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[    0.580341] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[    0.580455] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[    0.580469] pci 0000:00:08.0: reg 0x10: [mem 0xf0e40000-0xf0e5ffff 64bit pref]
[    0.580474] pci 0000:00:08.0: reg 0x18: [mem 0xf0b00000-0xf0bfffff]
[    0.580479] pci 0000:00:08.0: reg 0x1c: [mem 0xf0e6f000-0xf0e6ffff]
[    0.580487] pci 0000:00:08.0: reg 0x24: [mem 0xf0e6a000-0xf0e6bfff]
[    0.580593] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[    0.580696] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[    0.580707] pci 0000:00:09.2: reg 0x10: [mem 0xf0e64000-0xf0e67fff]
[    0.580745] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[    0.580855] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[    0.580883] pci 0000:00:10.0: reg 0x10: [mem 0xf0e68000-0xf0e69fff 64bit]
[    0.580987] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.581102] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[    0.581121] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    0.581130] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    0.581138] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    0.581146] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    0.581154] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    0.581163] pci 0000:00:11.0: reg 0x24: [mem 0xf0e6c000-0xf0e6c3ff]
[    0.581200] pci 0000:00:11.0: PME# supported from D3hot
[    0.581298] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[    0.582362] pci 0000:00:12.0: reg 0x10: [mem 0xf0e6d000-0xf0e6d0ff]
[    0.585351] pci 0000:00:12.0: supports D1 D2
[    0.585353] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.585450] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.585593] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.585746] pci 0000:00:18.0: [1022:15b0] type 00 class 0x060000
[    0.585835] pci 0000:00:18.1: [1022:15b1] type 00 class 0x060000
[    0.585922] pci 0000:00:18.2: [1022:15b2] type 00 class 0x060000
[    0.586017] pci 0000:00:18.3: [1022:15b3] type 00 class 0x060000
[    0.586318] pci 0000:00:18.4: [1022:15b4] type 00 class 0x060000
[    0.586405] pci 0000:00:18.5: [1022:15b5] type 00 class 0x060000
[    0.586595] pci 0000:01:00.0: [1002:6665] type 00 class 0x038000
[    0.586623] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.586636] pci 0000:01:00.0: reg 0x18: [mem 0xf0d00000-0xf0d3ffff 64bit]
[    0.586645] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.586661] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.586669] pci 0000:01:00.0: enabling Extended Tags
[    0.586730] pci 0000:01:00.0: supports D1 D2
[    0.586732] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.586767] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:02.1 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[    0.586845] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.586850] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    0.586853] pci 0000:00:02.1:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    0.586857] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.586911] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
[    0.586938] pci 0000:02:00.0: reg 0x10: [mem 0xf0c05000-0xf0c05fff]
[    0.586991] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.587076] pci 0000:02:00.0: supports D1 D2
[    0.587077] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.587182] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
[    0.587208] pci 0000:02:00.1: reg 0x10: [io  0x2000-0x20ff]
[    0.587232] pci 0000:02:00.1: reg 0x18: [mem 0xf0c04000-0xf0c04fff 64bit]
[    0.587247] pci 0000:02:00.1: reg 0x20: [mem 0xf0c00000-0xf0c03fff 64bit]
[    0.587334] pci 0000:02:00.1: supports D1 D2
[    0.587336] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.587463] pci 0000:00:02.2: PCI bridge to [bus 02]
[    0.587468] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
[    0.587471] pci 0000:00:02.2:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    0.587641] pci 0000:03:00.0: [168c:0042] type 00 class 0x028000
[    0.587832] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf09fffff 64bit]
[    0.588534] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.589031] pci 0000:00:02.3: PCI bridge to [bus 03]
[    0.589037] pci 0000:00:02.3:   bridge window [mem 0xf0800000-0xf09fffff]
[    0.590030] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
[    0.590129] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
[    0.590209] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
[    0.590308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
[    0.590400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
[    0.590472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
[    0.590545] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
[    0.590618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
[    0.591573] ACPI: EC: interrupt unblocked
[    0.591573] ACPI: EC: event unblocked
[    0.591573] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.591573] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events
[    0.591578] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.591578] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.591578] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.591578] vgaarb: loaded
[    0.591578] ACPI: bus type USB registered
[    0.591578] usbcore: registered new interface driver usbfs
[    0.591578] usbcore: registered new interface driver hub
[    0.591578] usbcore: registered new device driver usb
[    0.594560] pps_core: LinuxPPS API ver. 1 registered
[    0.594561] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.594565] PTP clock support registered
[    0.594577] EDAC MC: Ver: 3.0.0
[    0.596338] PCI: Using ACPI for IRQ routing
[    0.598156] PCI: pci_cache_line_size set to 64 bytes
[    0.598314] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.598317] e820: reserve RAM buffer [mem 0xc93b6000-0xcbffffff]
[    0.598318] e820: reserve RAM buffer [mem 0xcefbf000-0xcfffffff]
[    0.598319] e820: reserve RAM buffer [mem 0xcfc00000-0xcfffffff]
[    0.598320] e820: reserve RAM buffer [mem 0x20f000000-0x20fffffff]
[    0.598459] NetLabel: Initializing
[    0.598460] NetLabel:  domain hash size = 128
[    0.598461] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.598476] NetLabel:  unlabeled traffic allowed by default
[    0.598481] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.598481] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.599624] clocksource: Switched to clocksource tsc-early
[    0.616145] VFS: Disk quotas dquot_6.6.0
[    0.616167] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.616208] *** VALIDATE hugetlbfs ***
[    0.616277] pnp: PnP ACPI init
[    0.616576] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.616578] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.616580] system 00:00: [mem 0xf0a00000-0xf0afffff] has been reserved
[    0.616587] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.616807] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.616841] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.616933] system 00:03: [io  0x0400-0x04cf] has been reserved
[    0.616935] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.616937] system 00:03: [io  0x04d6] has been reserved
[    0.616939] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.616940] system 00:03: [io  0x0c14] has been reserved
[    0.616942] system 00:03: [io  0x0c50-0x0c52] has been reserved
[    0.616943] system 00:03: [io  0x0c6c] has been reserved
[    0.616945] system 00:03: [io  0x0c6f] has been reserved
[    0.616946] system 00:03: [io  0x0cd0-0x0cdb] has been reserved
[    0.616950] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.617038] system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.617040] system 00:04: [mem 0xff800000-0xffffffff] has been reserved
[    0.617044] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.617877] pnp: PnP ACPI: found 5 devices
[    0.619661] thermal_sys: Registered thermal governor 'fair_share'
[    0.619663] thermal_sys: Registered thermal governor 'bang_bang'
[    0.619664] thermal_sys: Registered thermal governor 'step_wise'
[    0.619665] thermal_sys: Registered thermal governor 'user_space'
[    0.619666] thermal_sys: Registered thermal governor 'power_allocator'
[    0.624210] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.624252] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.624255] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.624257] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.624280] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0e80000-0xf0e9ffff pref]
[    0.624284] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0d40000-0xf0d5ffff pref]
[    0.624286] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.624289] pci 0000:00:02.1:   bridge window [io  0x3000-0x3fff]
[    0.624294] pci 0000:00:02.1:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    0.624297] pci 0000:00:02.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.624302] pci 0000:02:00.0: BAR 6: assigned [mem 0xf0c10000-0xf0c1ffff pref]
[    0.624304] pci 0000:00:02.2: PCI bridge to [bus 02]
[    0.624306] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
[    0.624310] pci 0000:00:02.2:   bridge window [mem 0xf0c00000-0xf0cfffff]
[    0.624316] pci 0000:00:02.3: PCI bridge to [bus 03]
[    0.624320] pci 0000:00:02.3:   bridge window [mem 0xf0800000-0xf09fffff]
[    0.624329] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.624331] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.624332] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.624334] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.624336] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.624337] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.624338] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.624340] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.624341] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.624343] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.624344] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.624345] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.624347] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.624348] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.624349] pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff window]
[    0.624351] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
[    0.624352] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.624354] pci_bus 0000:01: resource 1 [mem 0xf0d00000-0xf0dfffff]
[    0.624355] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.624357] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.624358] pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
[    0.624360] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf09fffff]
[    0.624495] NET: Registered protocol family 2
[    0.624671] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.624693] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.624830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.625117] TCP: Hash tables configured (established 65536 bind 65536)
[    0.625192] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.625234] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.625354] NET: Registered protocol family 1
[    0.625361] NET: Registered protocol family 44
[    0.625375] pci 0000:00:01.0: disabling ATS (broken on this device)
[    0.625383] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.625391] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[    0.653817] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x63a took 18559 usecs
[    0.653899] PCI: CLS 64 bytes, default 64
[    0.653959] Trying to unpack rootfs image as initramfs...
[    1.058393] Freeing initrd memory: 23856K
[    1.058418] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    1.058619] pci 0000:00:00.2: can't derive routing for PCI INT A
[    1.058621] pci 0000:00:00.2: PCI INT A: not connected
[    1.058875] pci 0000:00:01.0: Adding to iommu group 0
[    1.058892] pci 0000:00:01.0: Using iommu direct mapping
[    1.058912] pci 0000:00:01.1: Adding to iommu group 0
[    1.058981] pci 0000:00:02.0: Adding to iommu group 1
[    1.059003] pci 0000:00:02.1: Adding to iommu group 1
[    1.059024] pci 0000:00:02.2: Adding to iommu group 1
[    1.059044] pci 0000:00:02.3: Adding to iommu group 1
[    1.059115] pci 0000:00:03.0: Adding to iommu group 2
[    1.059191] pci 0000:00:08.0: Adding to iommu group 3
[    1.059269] pci 0000:00:09.0: Adding to iommu group 4
[    1.059287] pci 0000:00:09.2: Adding to iommu group 4
[    1.059363] pci 0000:00:10.0: Adding to iommu group 5
[    1.059437] pci 0000:00:11.0: Adding to iommu group 6
[    1.059520] pci 0000:00:12.0: Adding to iommu group 7
[    1.059606] pci 0000:00:14.0: Adding to iommu group 8
[    1.059625] pci 0000:00:14.3: Adding to iommu group 8
[    1.059747] pci 0000:00:18.0: Adding to iommu group 9
[    1.059768] pci 0000:00:18.1: Adding to iommu group 9
[    1.059788] pci 0000:00:18.2: Adding to iommu group 9
[    1.059808] pci 0000:00:18.3: Adding to iommu group 9
[    1.059827] pci 0000:00:18.4: Adding to iommu group 9
[    1.059846] pci 0000:00:18.5: Adding to iommu group 9
[    1.059863] pci 0000:01:00.0: Adding to iommu group 1
[    1.059884] pci 0000:02:00.0: Adding to iommu group 1
[    1.059900] pci 0000:02:00.1: Adding to iommu group 1
[    1.059968] pci 0000:03:00.0: Adding to iommu group 1
[    1.060546] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    1.060549] pci 0000:00:00.2: AMD-Vi: Extended features (0x37ef22294ada):
[    1.060550]  PPR NX GT IA GA PC GA_vAPIC
[    1.060554] AMD-Vi: Interrupt remapping enabled
[    1.060555] AMD-Vi: Virtual APIC enabled
[    1.060727] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.062778] LVT offset 0 assigned for vector 0x400
[    1.062822] perf: AMD IBS detected (0x000007ff)
[    1.062828] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    1.062913] check: Scanning for low memory corruption every 60 seconds
[    1.063465] Initialise system trusted keyrings
[    1.063478] Key type blacklist registered
[    1.063548] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.065220] zbud: loaded
[    1.071908] Key type asymmetric registered
[    1.071911] Asymmetric key parser 'x509' registered
[    1.071934] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.072013] io scheduler mq-deadline registered
[    1.072015] io scheduler kyber registered
[    1.072069] io scheduler bfq registered
[    1.072580] pcieport 0000:00:02.1: PME: Signaling with IRQ 26
[    1.072611] pcieport 0000:00:02.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[    1.072875] pcieport 0000:00:02.2: PME: Signaling with IRQ 27
[    1.073060] pcieport 0000:00:02.3: PME: Signaling with IRQ 28
[    1.073139] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.073256] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[    1.073257] vesafb: scrolling: redraw
[    1.073259] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.073281] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 4224k, total 4224k
[    1.073340] fbcon: Deferring console take-over
[    1.073342] fb0: VESA VGA frame buffer device
[    1.073403] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.073414] ACPI: Power Button [PWRB]
[    1.073484] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.073492] ACPI: Sleep Button [SLPB]
[    1.073534] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.073541] ACPI: Lid Switch [LID]
[    1.073583] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.080079] ACPI: Power Button [PWRF]
[    1.080193] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.080617] acpi device:00: registered as cooling_device0
[    1.080663] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.080709] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    1.080946] acpi device:02: registered as cooling_device1
[    1.080990] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:01/input/input5
[    1.081790] thermal LNXTHERM:00: registered as thermal_zone0
[    1.081791] ACPI: Thermal Zone [THRM] (37 C)
[    1.082053] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.082607] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.083105] usbcore: registered new interface driver usbserial_generic
[    1.083111] usbserial: USB Serial support registered for generic
[    1.083136] rtc_cmos 00:01: RTC can wake from S4
[    1.083274] rtc_cmos 00:01: registered as rtc0
[    1.083292] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.083381] ledtrig-cpu: registered to indicate activity on CPUs
[    1.083463] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[    1.083681] NET: Registered protocol family 10
[    1.093847] Segment Routing with IPv6
[    1.093883] NET: Registered protocol family 17
[    1.094148] RAS: Correctable Errors collector initialized.
[    1.094204] microcode: CPU0: patch_level=0x06006705
[    1.094211] microcode: CPU1: patch_level=0x06006705
[    1.094265] microcode: Microcode Update Driver: v2.2.
[    1.094282] sched_clock: Marking stable (1073741438, 20518397)->(1096567867, -2308032)
[    1.094457] registered taskstats version 1
[    1.094475] Loading compiled-in X.509 certificates
[    1.100306] Loaded X.509 cert 'Build time autogenerated kernel key: dc770a63c5239f0874bae0e236c215ccbac37ab4'
[    1.100349] zswap: loaded using pool lzo/zbud
[    1.110185] Key type big_key registered
[    1.110620] PM:   Magic number: 3:149:766
[    1.110728] rtc_cmos 00:01: setting system clock to 2019-09-21T03:47:39 UTC (1569037659)
[    1.112691] Freeing unused decrypted memory: 2040K
[    1.113311] Freeing unused kernel image memory: 1632K
[    1.120312] Write protecting the kernel read-only data: 18432k
[    1.121219] Freeing unused kernel image memory: 2012K
[    1.121304] Freeing unused kernel image memory: 144K
[    1.133167] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.133176] Run /init as init process
[    1.155226] fbcon: Taking over console
[    1.155340] Console: switching to colour frame buffer device 170x48
[    1.174789] Linux agpgart interface v0.103
[    1.304992] [drm] amdgpu kernel modesetting enabled.
[    1.305031] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    1.305625] ATPX version 1, functions 0x00000003
[    1.305766] Parsing CRAT table with 1 nodes
[    1.305769] Creating topology SYSFS entries
[    1.305790] Topology: Add APU node [0x0:0x0]
[    1.305790] Finished initializing topology
[    1.305854] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    1.305857] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf07fffff
[    1.305859] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0e00000 -> 0xf0e3ffff
[    1.305861] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[    1.305863] fb0: switching to amdgpudrmfb from VESA VGA
[    1.306526] Console: switching to colour dummy device 80x25
[    1.306596] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[    1.307032] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x1025:0x1192 0xCA).
[    1.307058] [drm] register mmio base: 0xF0E00000
[    1.307059] [drm] register mmio size: 262144
[    1.307065] [drm] add ip block number 0 <vi_common>
[    1.307067] [drm] add ip block number 1 <gmc_v8_0>
[    1.307068] [drm] add ip block number 2 <cz_ih>
[    1.307069] [drm] add ip block number 3 <gfx_v8_0>
[    1.307070] [drm] add ip block number 4 <sdma_v3_0>
[    1.307071] [drm] add ip block number 5 <powerplay>
[    1.307073] [drm] add ip block number 6 <dm>
[    1.307074] [drm] add ip block number 7 <uvd_v6_0>
[    1.307075] [drm] add ip block number 8 <vce_v3_0>
[    1.307076] [drm] add ip block number 9 <acp_ip>
[    1.307080] amdgpu 0000:00:01.0: kfd not supported on this ASIC
[    1.319543] [drm] BIOS signature incorrect 0 0
[    1.319562] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[    1.319568] caller pci_map_rom+0x6a/0x17d mapping multiple BARs
[    1.322011] ATOM BIOS: SWBRT19987.001
[    1.322044] [drm] UVD is enabled in physical mode
[    1.322046] [drm] VCE enabled in VM mode
[    1.322092] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    1.322100] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    1.322102] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[    1.322107] [drm] Detected VRAM RAM=512M, BAR=512M
[    1.322108] [drm] RAM width 64bits UNKNOWN
[    1.322208] [TTM] Zone  kernel: Available graphics memory: 3830780 KiB
[    1.322210] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    1.322211] [TTM] Initializing pool allocator
[    1.322218] [TTM] Initializing DMA pool allocator
[    1.322268] [drm] amdgpu: 512M of VRAM memory ready
[    1.322272] [drm] amdgpu: 3072M of GTT memory ready.
[    1.322287] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.322321] [drm] PCIE GART of 1024M enabled (table at 0x000000F400401000).
[    1.323803] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu8_smu
[    1.324015] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[    1.324022] [drm] UVD ENC is disabled
[    1.324391] [drm] Found VCE firmware Version: 52.0 Binary ID: 3
[    1.324929] smu version 33.06.00
[    1.354500] [drm] DM_PPLIB: values for Engine clock
[    1.354501] [drm] DM_PPLIB:   200000
[    1.354502] [drm] DM_PPLIB:   300000
[    1.354503] [drm] DM_PPLIB:   400000
[    1.354503] [drm] DM_PPLIB:   480000
[    1.354504] [drm] DM_PPLIB:   553850
[    1.354504] [drm] DM_PPLIB:   626090
[    1.354505] [drm] DM_PPLIB:   685720
[    1.354505] [drm] DM_PPLIB:   720000
[    1.354506] [drm] DM_PPLIB: Validation clocks:
[    1.354507] [drm] DM_PPLIB:    engine_max_clock: 72000
[    1.354508] [drm] DM_PPLIB:    memory_max_clock: 80000
[    1.354508] [drm] DM_PPLIB:    level           : 8
[    1.354510] [drm] DM_PPLIB: values for Display clock
[    1.354511] [drm] DM_PPLIB:   300000
[    1.354511] [drm] DM_PPLIB:   400000
[    1.354512] [drm] DM_PPLIB:   496560
[    1.354512] [drm] DM_PPLIB:   626090
[    1.354513] [drm] DM_PPLIB:   685720
[    1.354513] [drm] DM_PPLIB:   757900
[    1.354514] [drm] DM_PPLIB:   800000
[    1.354514] [drm] DM_PPLIB:   847060
[    1.354515] [drm] DM_PPLIB: Validation clocks:
[    1.354515] [drm] DM_PPLIB:    engine_max_clock: 72000
[    1.354516] [drm] DM_PPLIB:    memory_max_clock: 80000
[    1.354516] [drm] DM_PPLIB:    level           : 8
[    1.354517] [drm] DM_PPLIB: values for Memory clock
[    1.354518] [drm] DM_PPLIB:   667000
[    1.354518] [drm] DM_PPLIB:   800000
[    1.354519] [drm] DM_PPLIB: Validation clocks:
[    1.354519] [drm] DM_PPLIB:    engine_max_clock: 72000
[    1.354520] [drm] DM_PPLIB:    memory_max_clock: 80000
[    1.354521] [drm] DM_PPLIB:    level           : 8
[    1.369879] [drm] Display Core initialized with v3.2.35!
[    1.378015] [drm] SADs count is: -2, don't need to read it
[    1.379881] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.379883] [drm] Driver supports precise vblank timestamp query.
[    1.406064] [drm] UVD initialized successfully.
[    1.506939] [drm] VCE initialized successfully.
[    1.507893] [drm] fb mappable at 0x20F86F000
[    1.507895] [drm] vram apper at 0x20F000000
[    1.507896] [drm] size 4325376
[    1.507897] [drm] fb depth is 24
[    1.507897] [drm]    pitch is 5632
[    1.508009] fbcon: amdgpudrmfb (fb0) is primary device
[    1.509987] Console: switching to colour frame buffer device 170x48
[    1.520335] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[    1.551088] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:00:01.0 on minor 0
[    1.551155] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
[    1.551157] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0d00000 -> 0xf0d3ffff
[    1.551395] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6665 0x1025:0x1192 0xC3).
[    1.551419] [drm] register mmio base: 0xF0D00000
[    1.551420] [drm] register mmio size: 262144
[    1.551423] [drm] PCIE atomic ops is not supported
[    1.551429] [drm] add ip block number 0 <si_common>
[    1.551430] [drm] add ip block number 1 <gmc_v6_0>
[    1.551432] [drm] add ip block number 2 <si_ih>
[    1.551432] [drm] add ip block number 3 <gfx_v6_0>
[    1.551433] [drm] add ip block number 4 <si_dma>
[    1.551434] [drm] add ip block number 5 <si_dpm>
[    1.551438] amdgpu 0000:01:00.0: kfd not supported on this ASIC
[    1.634562] ATOM BIOS: SWBRT22035.001
[    1.634587] vga_switcheroo: enabled
[    1.634609] [drm] GPU posting now...
[    1.638726] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    1.638803] amdgpu 0000:01:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    1.638806] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[    1.638929] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.638930] [drm] RAM width 64bits GDDR5
[    1.638958] [drm] amdgpu: 2048M of VRAM memory ready
[    1.638961] [drm] amdgpu: 3072M of GTT memory ready.
[    1.638990] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    1.639585] amdgpu 0000:01:00.0: PCIE GART of 256M enabled (table at 0x000000F400000000).
[    1.639735] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.639736] [drm] Driver supports precise vblank timestamp query.
[    1.640845] [drm] Internal thermal controller without fan control
[    1.640857] [drm] amdgpu: dpm initialized
[    2.066300] tsc: Refined TSC clocksource calibration: 1796.627 MHz
[    2.066307] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e5b73c0b8, max_idle_ns: 440795215505 ns
[    2.066326] clocksource: Switched to clocksource tsc
[    2.359055] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:01:00.0 on minor 1
[    2.398630] [drm] radeon kernel modesetting enabled.
[    2.398670] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    2.399364] ATPX version 1, functions 0x00000003
[    2.484595] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[    2.484597] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.487317] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.510844] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.510853] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    2.511061] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[    2.511609] SCSI subsystem initialized
[    2.518860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.520571] ehci-pci: EHCI PCI platform driver
[    2.522153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    2.522157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.522160] usb usb1: Product: xHCI Host Controller
[    2.522162] usb usb1: Manufacturer: Linux 5.3.0-arch1-1-ARCH xhci-hcd
[    2.522163] usb usb1: SerialNumber: 0000:00:10.0
[    2.522946] hub 1-0:1.0: USB hub found
[    2.523309] hub 1-0:1.0: 4 ports detected
[    2.526397] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.526406] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.526413] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[    2.526454] ehci-pci 0000:00:12.0: EHCI Host Controller
[    2.527013] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.527219] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    2.527223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.527226] usb usb2: Product: xHCI Host Controller
[    2.527228] usb usb2: Manufacturer: Linux 5.3.0-arch1-1-ARCH xhci-hcd
[    2.527230] usb usb2: SerialNumber: 0000:00:10.0
[    2.527872] hub 2-0:1.0: USB hub found
[    2.528037] hub 2-0:1.0: 4 ports detected
[    2.529253] libata version 3.00 loaded.
[    2.530290] usb: port power management may be unreliable
[    2.532379] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.532397] ehci-pci 0000:00:12.0: debug port 2
[    2.532467] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0e6d000
[    2.534201] ahci 0000:00:11.0: version 3.0
[    2.534491] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    2.534495] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    2.534863] scsi host0: ahci
[    2.535001] ata1: SATA max UDMA/133 abar m1024@0xf0e6c000 port 0xf0e6c100 irq 19
[    2.542978] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    2.543057] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    2.543059] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.543061] usb usb3: Product: EHCI Host Controller
[    2.543063] usb usb3: Manufacturer: Linux 5.3.0-arch1-1-ARCH ehci_hcd
[    2.543064] usb usb3: SerialNumber: 0000:00:12.0
[    2.543236] hub 3-0:1.0: USB hub found
[    2.543246] hub 3-0:1.0: 2 ports detected
[    2.557143] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[    2.873172] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    3.003173] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.004123] ata1.00: ATA-10: WDC WD10SPZX-21Z10T0, 02.01A02, max UDMA/133
[    3.004126] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.005420] ata1.00: configured for UDMA/133
[    3.005670] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPZX-21Z 1A02 PQ: 0 ANSI: 5
[    3.009618] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.009644] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.009662] sd 0:0:0:0: [sda] Write Protect is off
[    3.009664] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.009689] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.020499] usb 3-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[    3.020503] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.021857] hub 3-1:1.0: USB hub found
[    3.021920] hub 3-1:1.0: 4 ports detected
[    3.118041]  sda: sda1
[    3.118653] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.319844] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[    3.367190] random: fast init done
[    3.440316] usb 3-1.1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    3.440320] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.440322] usb 3-1.1: Product: USB Receiver
[    3.440323] usb 3-1.1: Manufacturer: Logitech
[    3.446832] hidraw: raw HID events driver (C) Jiri Kosina
[    3.455679] usbcore: registered new interface driver usbhid
[    3.455682] usbhid: USB HID core driver
[    3.458338] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C534.0001/input/input7
[    3.513314] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
[    3.513796] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/input/input8
[    3.513846] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/input/input9
[    3.536477] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[    3.569732] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/input/input10
[    3.570150] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
[    3.596365] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input0
[    3.651844] usb 3-1.3: New USB device found, idVendor=04ca, idProduct=3015, bcdDevice= 0.01
[    3.651847] usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.683778] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1.1/input1
[    3.733153] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
[    3.741710] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
[    3.742929] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input13
[    3.743028] input: Logitech Wireless Keyboard PID:4023 Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input14
[    3.743062] input: Logitech Wireless Keyboard PID:4023 System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input15
[    3.743137] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:12.0-1.1/input1:1
[    3.743711] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[    3.744072] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input20
[    3.744125] hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:12.0-1.1/input1:2
[    3.755022] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.794111] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input24
[    3.794176] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:12.0-1.1/input1:1
[    3.799783] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C534.0002/0003:046D:4054.0004/input/input25
[    3.799840] logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:12.0-1.1/input1:2
[    3.851709] usb 3-1.4: New USB device found, idVendor=0408, idProduct=a031, bcdDevice= 0.06
[    3.851713] usb 3-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.851715] usb 3-1.4: Product: VGA WebCam
[    3.851717] usb 3-1.4: Manufacturer: Quanta
[    3.851718] usb 3-1.4: SerialNumber: 0x0001
[    5.382194] systemd[1]: systemd 243.0-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.396627] systemd[1]: Detected architecture x86-64.
[    5.398372] systemd[1]: Set hostname to <johns-pc>.
[    5.639873] random: crng init done
[    7.271435] systemd[1]: Created slice system-getty.slice.
[    7.271709] systemd[1]: Created slice User and Session Slice.
[    7.271780] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.271825] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.272080] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.272099] systemd[1]: Reached target Local Encrypted Volumes.
[    7.272114] systemd[1]: Reached target Login Prompts.
[    7.452754] EXT4-fs (sda1): re-mounted. Opts: (null)
[    8.184633] audit: type=1130 audit(1569037666.568:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.266927] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.268832] audit: type=1130 audit(1569037666.652:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.356884] audit: type=1130 audit(1569037666.742:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.401588] systemd-journald[260]: Received client request to flush runtime journal.
[    8.430364] audit: type=1130 audit(1569037666.815:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.187139] audit: type=1130 audit(1569037667.572:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.121813] audit: type=1130 audit(1569037668.505:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.256238] audit: type=1130 audit(1569037671.642:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.943324] acpi_cpufreq: overriding BIOS provided _PSD data
[   14.258314] battery: ACPI: Battery Slot [BAT1] (battery present)
[   14.259852] ACPI: AC Adapter [ACAD] (on-line)
[   14.322261] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   14.322265] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[   14.895960] i2c_hid i2c-ELAN0501:00: i2c-ELAN0501:00 supply vdd not found, using dummy regulator
[   14.895986] i2c_hid i2c-ELAN0501:00: i2c-ELAN0501:00 supply vddl not found, using dummy regulator
[   14.916705] input: ELAN0501:00 04F3:3060 Mouse as /devices/platform/AMD0010:00/i2c-0/i2c-ELAN0501:00/0018:04F3:3060.0005/input/input26
[   14.916746] input: ELAN0501:00 04F3:3060 Touchpad as /devices/platform/AMD0010:00/i2c-0/i2c-ELAN0501:00/0018:04F3:3060.0005/input/input28
[   14.916812] hid-generic 0018:04F3:3060.0005: input,hidraw4: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3060] on i2c-ELAN0501:00
[   14.925064] audit: type=1130 audit(1569037673.308:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:amdgpu_bl0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.060287] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   15.060428] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[   15.060540] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[   15.082621] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/10251229:00/input/input29
[   15.109200] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[   15.109561] AMD0020:00: ttyS0 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A
[   15.110267] AMD0020:01: ttyS1 at MMIO 0xfedc8000 (irq = 11, base_baud = 3000000) is a 16550A
[   15.183848] tpm_crb MSFT0101:00: can't request region for resource [mem 0xcfbba000-0xcfbbdfff]
[   15.183856] tpm_crb: probe of MSFT0101:00 failed with error -16
[   15.298640] input: PC Speaker as /devices/platform/pcspkr/input/input30
[   15.605900] input: ELAN0501:00 04F3:3060 Touchpad as /devices/platform/AMD0010:00/i2c-0/i2c-ELAN0501:00/0018:04F3:3060.0005/input/input33
[   15.605994] hid-multitouch 0018:04F3:3060.0005: input,hidraw4: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3060] on i2c-ELAN0501:00
[   15.689841] mousedev: PS/2 mouse device common for all mice
[   15.867987] acer_wmi: Acer Laptop ACPI-WMI Extras
[   15.868026] acer_wmi: Function bitmap for Communication Button: 0x801
[   15.900508] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
[   15.923210] input: Acer WMI hotkeys as /devices/virtual/input/input34
[   15.925275] libphy: r8169: probed
[   15.925504] r8169 0000:02:00.1 eth0: RTL8411b, d8:c4:97:d8:0f:2e, XID 5c8, IRQ 40
[   15.925507] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   15.926751] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   15.993822] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input35
[   15.997697] r8169 0000:02:00.1 enp2s0f1: renamed from eth0
[   16.073295] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   16.073299] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.073301] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   16.073303] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   16.073304] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   16.073307] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
[   16.073309] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   16.080273] cryptd: max_cpu_qlen set to 1000
[   16.112350] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   16.121603] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.2/sound/card1/input36
[   16.121681] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input37
[   16.150268] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   16.270625] audit: type=1130 audit(1569037674.655:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.302690] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   16.302696] cfg80211: failed to load regulatory.db
[   16.303153] mc: Linux media interface: v0.10
[   16.304947] AVX2 version of gcm_enc/dec engaged.
[   16.304949] AES CTR mode by8 optimization enabled
[   16.330416] Bluetooth: Core ver 2.22
[   16.330507] NET: Registered protocol family 31
[   16.330508] Bluetooth: HCI device and connection manager initialized
[   16.330515] Bluetooth: HCI socket layer initialized
[   16.330518] Bluetooth: L2CAP socket layer initialized
[   16.330523] Bluetooth: SCO socket layer initialized
[   16.393237] videodev: Linux video capture interface: v2.00
[   16.521863] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   16.873122] usbcore: registered new interface driver btusb
[   16.912021] uvcvideo: Found UVC 1.00 device VGA WebCam (0408:a031)
[   16.916061] uvcvideo 3-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[   16.916065] uvcvideo 3-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[   16.916067] uvcvideo 3-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[   16.916202] input: VGA WebCam: VGA WebCam as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input38
[   16.916567] usbcore: registered new interface driver uvcvideo
[   16.916570] USB Video Class driver (1.1.1)
[   17.025994] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[   17.025998] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[   17.043959] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6
[   17.043966] ath10k_pci 0000:03:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[   17.045336] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[   17.154155] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[   17.167310] kvm: Nested Virtualization enabled
[   17.167314] kvm: Nested Paging enabled
[   17.167315] SVM: Virtual VMLOAD VMSAVE supported
[   17.167315] SVM: Virtual GIF supported
[   17.198619] ath10k_pci 0000:03:00.0: UART prints enabled
[   17.205236] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[   17.267016] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[   17.284319] MCE: In-kernel MCE decoding enabled.
[   17.364068] audit: type=1130 audit(1569037675.748:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.473827] ath10k_pci 0000:03:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   17.573296] ath: EEPROM regdomain: 0x69
[   17.573299] ath: EEPROM indicates we should expect a direct regpair map
[   17.573302] ath: Country alpha2 being used: 00
[   17.573304] ath: Regpair used: 0x69
[   17.580138] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[   17.615290] audit: type=1130 audit(1569037675.998:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.924791] audit: type=1130 audit(1569037676.308:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.962916] audit: type=1127 audit(1569037676.345:14): pid=389 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   18.024130] audit: type=1130 audit(1569037676.408:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.225186] audit: type=1130 audit(1569037676.608:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.082743] audit: type=1130 audit(1569037677.468:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.101331] audit: type=1130 audit(1569037677.485:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.126068] audit: type=1130 audit(1569037677.508:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=clamav-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.133699] audit: type=1130 audit(1569037677.518:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.753648] audit: type=1130 audit(1569037679.138:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=smartd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.464042] audit: type=1130 audit(1569037679.848:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.592308] audit: type=1131 audit(1569037680.975:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.253442] audit: type=1130 audit(1569037682.635:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=firewalld comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   24.511253] audit: type=1325 audit(1569037682.892:25): table=filter family=2 entries=0
[   24.592615] audit: type=1325 audit(1569037682.975:26): table=filter family=10 entries=0
[   25.108703] audit: type=1130 audit(1569037683.488:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.113940] audit: type=1130 audit(1569037683.498:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=spamassassin comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.205288] audit: type=1130 audit(1569037683.588:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.208933] audit: type=1130 audit(1569037683.592:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.732973] audit: type=1130 audit(1569037684.115:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.507467] audit: type=1130 audit(1569037684.892:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   26.934247] Generic Realtek PHY r8169-201:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-201:00, irq=IGNORE)
[   27.050326] r8169 0000:02:00.1 enp2s0f1: Link is Down
[   27.163051] audit: type=1325 audit(1569037685.545:33): table=security family=2 entries=0
[   27.331884] ath10k_pci 0000:03:00.0: UART prints enabled
[   27.400079] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[   27.525735] amdgpu 0000:01:00.0: PCIE GART of 256M enabled (table at 0x000000F400000000).
[   27.977104] ath10k_pci 0000:03:00.0: UART prints enabled
[   28.045336] ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
[   33.810960] kauditd_printk_skb: 18 callbacks suppressed
[   33.810963] audit: type=1130 audit(1569037692.195:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@973 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.855128] audit: type=1130 audit(1569037692.238:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@973 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   37.057922] audit: type=1131 audit(1569037695.442:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.205865] wlp3s0: authenticate with 18:f1:45:d0:1e:64
[   38.264052] wlp3s0: send auth to 18:f1:45:d0:1e:64 (try 1/3)
[   38.272098] wlp3s0: authenticated
[   38.273070] wlp3s0: associate with 18:f1:45:d0:1e:64 (try 1/3)
[   38.276651] wlp3s0: RX AssocResp from 18:f1:45:d0:1e:64 (capab=0x411 status=0 aid=7)
[   38.332356] wlp3s0: associated
[   38.437638] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   39.452872] audit: type=1130 audit(1569037697.835:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.793637] audit: type=1130 audit(1569037698.175:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.245756] audit: type=1130 audit(1569037698.628:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.468181] audit: type=1130 audit(1569037698.848:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.472454] audit: type=1130 audit(1569037698.855:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=clamav-freshclam comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.140980] audit: type=1130 audit(1569037699.525:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.111751] logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected.
[   49.660187] audit: type=1006 audit(1569037708.045:61): pid=755 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[   49.775111] audit: type=1130 audit(1569037708.158:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.792869] audit: type=1006 audit(1569037708.175:63): pid=759 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   50.041627] audit: type=1131 audit(1569037708.425:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   50.094756] audit: type=1131 audit(1569037708.478:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@973 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   50.536219] audit: type=1130 audit(1569037708.915:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   51.527407] logitech-hidpp-device 0003:046D:4054.0004: HID++ 4.5 device connected.
[   55.798714] audit: type=1131 audit(1569037714.182:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   60.640626] audit: type=1130 audit(1569037719.025:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Offline

#13 2019-09-21 10:00:05

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

i have managed to blacklist radeon in the grub.cfg file.  did the usual grub-mkconfig etc and no change.  i still have flickering.

i also added to the mkinitcpio.conf file under modules amdgpu  this also made no difference.

Offline

#14 2019-09-21 10:01:12

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

here is my lsmod info

ccm                    20480  6
nf_tables_set          36864  3
nft_fib_inet           16384  1
nft_fib_ipv4           16384  1 nft_fib_inet
nft_fib_ipv6           16384  1 nft_fib_inet
nft_fib                16384  3 nft_fib_ipv6,nft_fib_ipv4,nft_fib_inet
nft_reject_inet        16384  4
nf_reject_ipv4         16384  1 nft_reject_inet
nf_reject_ipv6         20480  1 nft_reject_inet
nft_reject             16384  1 nft_reject_inet
nft_ct                 20480  6
nft_chain_nat          16384  4
nf_tables             167936  157 nft_ct,nft_reject_inet,nft_fib_ipv6,nft_fib_ipv4,nft_chain_nat,nf_tables_set,nft_reject,nft_fib,nft_fib_inet
nfnetlink              16384  1 nf_tables
ip6table_nat           16384  0
ip6table_mangle        16384  0
ip6table_raw           16384  0
ip6table_security      16384  0
iptable_nat            16384  0
nf_nat                 53248  3 ip6table_nat,nft_chain_nat,iptable_nat
iptable_mangle         16384  0
iptable_raw            16384  0
iptable_security       16384  0
nf_conntrack          167936  2 nf_nat,nft_ct
nf_defrag_ipv6         24576  1 nf_conntrack
nf_defrag_ipv4         16384  1 nf_conntrack
libcrc32c              16384  2 nf_conntrack,nf_nat
ip6table_filter        16384  0
ip6_tables             36864  5 ip6table_filter,ip6table_raw,ip6table_nat,ip6table_mangle,ip6table_security
iptable_filter         16384  0
ath10k_pci             65536  0
ath10k_core           602112  1 ath10k_pci
edac_mce_amd           32768  0
kvm_amd               106496  0
ccp                    98304  1 kvm_amd
ath                    36864  1 ath10k_core
kvm                   778240  1 kvm_amd
uvcvideo              114688  0
irqbypass              16384  1 kvm
mac80211              999424  1 ath10k_core
videobuf2_vmalloc      20480  1 uvcvideo
videobuf2_memops       20480  1 videobuf2_vmalloc
videobuf2_v4l2         28672  1 uvcvideo
crct10dif_pclmul       16384  1
videobuf2_common       57344  2 videobuf2_v4l2,uvcvideo
crc32_pclmul           16384  0
btusb                  65536  0
joydev                 28672  0
mousedev               24576  0
ghash_clmulni_intel    16384  0
btrtl                  24576  1 btusb
acer_wmi               28672  0
btbcm                  16384  1 btusb
videodev              237568  3 videobuf2_v4l2,uvcvideo,videobuf2_common
wmi_bmof               16384  0
btintel                28672  1 btusb
sparse_keymap          16384  1 acer_wmi
hid_multitouch         32768  0
bluetooth             675840  5 btrtl,btintel,btbcm,btusb
aesni_intel           372736  4
hid_logitech_hidpp     45056  0
mc                     61440  4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
snd_hda_codec_realtek   126976  1
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
snd_hda_codec_generic    94208  1 snd_hda_codec_realtek
cryptd                 24576  2 crypto_simd,ghash_clmulni_intel
snd_hda_codec_hdmi     69632  1
glue_helper            16384  1 aesni_intel
ledtrig_audio          16384  2 snd_hda_codec_generic,snd_hda_codec_realtek
cfg80211              856064  3 ath,mac80211,ath10k_core
snd_hda_intel          53248  4
r8169                  94208  0
ecdh_generic           16384  1 bluetooth
snd_hda_codec         159744  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
ecc                    32768  1 ecdh_generic
pcspkr                 16384  0
input_leds             16384  0
wdat_wdt               20480  0
tpm_crb                20480  0
realtek                20480  1
snd_hda_core          102400  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
rfkill                 28672  7 acer_wmi,bluetooth,cfg80211
snd_hwdep              20480  1 snd_hda_codec
rtsx_pci_ms            24576  0
libarc4                16384  1 mac80211
libphy                 98304  2 r8169,realtek
k10temp                16384  0
fam15h_power           16384  0
snd_pcm               135168  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
memstick               20480  1 rtsx_pci_ms
tpm_tis                16384  0
snd_timer              40960  1 snd_pcm
tpm_tis_core           24576  1 tpm_tis
snd                   110592  16 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
tpm                    73728  3 tpm_tis,tpm_crb,tpm_tis_core
evdev                  24576  19
i2c_hid                32768  0
mac_hid                16384  0
8250_dw                28672  0
sp5100_tco             20480  0
soundcore              16384  1 snd
pinctrl_amd            32768  1
wmi                    36864  2 acer_wmi,wmi_bmof
acer_wireless          20480  0
rng_core               16384  2 ccp,tpm
ac                     16384  0
i2c_piix4              28672  0
battery                24576  0
acpi_cpufreq           28672  0
sg                     40960  0
crypto_user            16384  0
ip_tables              36864  5 iptable_filter,iptable_security,iptable_raw,iptable_nat,iptable_mangle
x_tables               49152  10 ip6table_filter,ip6table_raw,iptable_filter,iptable_security,ip6_tables,iptable_raw,ip_tables,ip6table_mangle,ip6table_security,iptable_mangle
ext4                  770048  1
crc32c_generic         16384  0
crc16                  16384  2 bluetooth,ext4
mbcache                16384  1 ext4
jbd2                  135168  1 ext4
hid_logitech_dj        28672  0
hid_generic            16384  0
usbhid                 65536  1 hid_logitech_dj
hid                   143360  6 i2c_hid,usbhid,hid_multitouch,hid_generic,hid_logitech_dj,hid_logitech_hidpp
sd_mod                 57344  2
rtsx_pci_sdmmc         32768  0
serio_raw              20480  0
mmc_core              184320  1 rtsx_pci_sdmmc
atkbd                  36864  0
libps2                 20480  1 atkbd
ahci                   40960  1
libahci                40960  1 ahci
xhci_pci               20480  0
crc32c_intel           24576  3
xhci_hcd              278528  1 xhci_pci
libata                282624  2 libahci,ahci
ehci_pci               20480  0
ehci_hcd               98304  1 ehci_pci
scsi_mod              249856  3 sd_mod,libata,sg
rtsx_pci               81920  2 rtsx_pci_sdmmc,rtsx_pci_ms
i8042                  32768  1 acer_wmi
serio                  28672  4 serio_raw,atkbd,i8042
amdgpu               4714496  32
gpu_sched              36864  1 amdgpu
i2c_algo_bit           16384  1 amdgpu
ttm                   118784  1 amdgpu
drm_kms_helper        212992  1 amdgpu
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
drm                   516096  14 gpu_sched,drm_kms_helper,amdgpu,ttm
agpgart                53248  2 ttm,drm

Offline

#15 2019-09-21 10:02:57

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

grub.cfg file:

# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 quiet modprobe.blacklist=radeon"
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Set to 'countdown' or 'hidden' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"

i've even removed xf86-video-ati and it makes no difference.  quite frustrating

Last edited by jshand2016 (2019-09-21 10:04:36)

Offline

#16 2019-09-21 10:37:51

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,963

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

Thanks however please don't quadruple post but edit to amend existing posts with new information.

Now that you've successfully switched to amdgpu there's a few other things we can try, first the sledgehammer, add to your kernel parameters:

amdgpu.dc=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0

if that helps, try to remove them one by one until you've isolated a hopefully single crucial option.

Offline

#17 2019-09-21 20:12:55

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

V1del wrote:

Thanks however please don't quadruple post but edit to amend existing posts with new information.

Now that you've successfully switched to amdgpu there's a few other things we can try, first the sledgehammer, add to your kernel parameters:

amdgpu.dc=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0

if that helps, try to remove them one by one until you've isolated a hopefully single crucial option.

can you please explain what these options mean.  i would hate to accidentally fix the problem and not know what fixed it

Offline

#18 2019-09-21 20:22:19

loqs
Member
Registered: 2014-03-06
Posts: 9,247

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

Options are documented here.

Offline

#19 2019-09-22 21:01:33

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

V1del wrote:

Thanks however please don't quadruple post but edit to amend existing posts with new information.

Now that you've successfully switched to amdgpu there's a few other things we can try, first the sledgehammer, add to your kernel parameters:

amdgpu.dc=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0

if that helps, try to remove them one by one until you've isolated a hopefully single crucial option.

i've tried the amdgpu.dc=0 and i got the black creen of death on loadup.  had to use rescue disk to get it back.

i'm a bit scared to use any of the others to be honest as i don't want to damage my new laptop

Offline

#20 2019-09-22 21:02:55

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

loqs wrote:

Options are documented here.

thanks mate, however, i'm even more confued with all these options.  all i want to do is stop the flickering as i am concerned it is damaging my new laptop

Offline

#21 2019-09-22 22:49:22

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

jshand2016 wrote:

i have currently done a fresh install of Arch linux.  so far i have been unable to find out why my new laptop Aspire 3 A315-21G-91JL has a screen that flashes occassionally.  Quite an annoying bug.  is there a fix for this issue yet.

i have these opensource drivers installed:

xf86-video-amdgpu
xf86-video-ati

i do not have catalyst installed.

please help me.  i really need a fix for this

ie  for some reason my laptop has two graphics cards APU and Radeon 520 graphics card

i have removed those drivers and am currently using the kernel driver amdgpu, and is still flickering.  please mark this as the most annoying bug

Offline

#22 2019-09-23 02:47:01

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

what i have done so far is:

1.  in grub settings i have put in kernel default settings mitigations=auto and modprobe.blacklist=radeon and used grub-mkconfig -o /boot/grub/grub.cfg
2.  in the mkinitcpio.conf file under modules i put amdgpu and then did a mkinitcpio -p linux command
3.  in rescue mode i used the command X -configure to create a xorg.conf file.  copied it to /etc/X11/xorg.conf.d/xorg.conf

even after these changes i was unable to stop the flickering sad

Offline

#23 2019-09-23 03:49:56

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

what my xorg.conf file looks like:

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	Screen      2  "Screen2" RightOf "Screen1"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/75dpi"
EndSection

Section "Module"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "Monitor2"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI3"               	# [<bool>]
        #Option     "DRI"                	# <i>
        #Option     "ShadowPrimary"      	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
	Identifier  "Card0"
	Driver      "amdgpu"
	BusID       "PCI:0:1:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI3"               	# [<bool>]
        #Option     "DRI"                	# <i>
        #Option     "ShadowPrimary"      	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
	Identifier  "Card1"
	Driver      "amdgpu"
	BusID       "PCI:0:1:1"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "Accel"              	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ZaphodHeads"        	# <str>
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI3"               	# [<bool>]
        #Option     "DRI"                	# <i>
        #Option     "ShadowPrimary"      	# [<bool>]
        #Option     "TearFree"           	# [<bool>]
        #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
        #Option     "VariableRefresh"    	# [<bool>]
	Identifier  "Card2"
	Driver      "amdgpu"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen2"
	Device     "Card2"
	Monitor    "Monitor2"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Offline

#24 2019-09-23 08:04:22

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,963

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

Stop doing quadruple posts... Remove that xorg.config, and then use those parameters, they are not dangerous, they will increase power draw because they disable some downclocking functionality, but they are crucial to identifying the cause of the issue. Keep the DC away if need be but definitely try runpm and dpm

Last edited by V1del (2019-09-23 08:05:34)

Offline

#25 2019-09-23 08:35:10

jshand2016
Member
Registered: 2016-01-29
Posts: 25

Re: AMD A9 9420e APU and AMD Radeon 520 Screen Flickers

V1del wrote:

Stop doing quadruple posts... Remove that xorg.config, and then use those parameters, they are not dangerous, they will increase power draw because they disable some downclocking functionality, but they are crucial to identifying the cause of the issue. Keep the DC away if need be but definitely try runpm and dpm

sorry mate, i'm really new to this forum.

in my grub.cfg i have now got radeon.si_support=0 amdgpu.si_support=1 in the command line.  did a grub-mkconfig -o /boot/grub/grub.cfg to make those changes permanent.  did  a reboot.  the screen still flashes, but it took a little while longer this time.

anything else you would like me to try??

Offline

Board footer

Powered by FluxBB