You are not logged in.
- Topics: Active | Unanswered
#1 2024-07-02 01:24:14
- HenryJia
- Member
- Registered: 2013-11-30
- Posts: 20
NVidia 555 Display Issues with Dual Monitor on Gnome
Updated my system earlier this morning and discovered some weird behaviour on Gnome
My system would recognise that the second display existed and was plugged in, but the moment the NVidia driver loaded it would cause one of the displays to go completely black
However, Gnome was still pretending that the second display is active and try to display stuff in it (despite the fact that it was completely black and not active). Nvidia settings also seems to show the display as active, even though it was black
I was able to fix this by downgrading to 550.90.07 drivers, as well as switching to the DKMS drivers.
For good measure, I also set nvidia_drm.modeset=1 in my kernel settings via /etc/default/grub
This seemed to restore everything back to normal functionality.
I am not completely certain on what caused this, since I am not using Wayland. I'm using Gnome on X11, and all the current issues I've seen here use Wayland. For example: https://bbs.archlinux.org/viewtopic.php?id=295937
My intuition was that my issue was caused by the fact that my system is a little oder and I still use DVI to HDMI on one of my displays: https://forums.developer.nvidia.com/t/b … een/298311
I'm putting this post here in case it helps anyone else experiencing the same problem
Last edited by HenryJia (2024-07-02 01:25:03)
Computational scientist and machine learning engineer
Offline
#2 2024-07-02 05:45:39
- d.ALT
- Member
- Registered: 2019-05-10
- Posts: 943
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
HenryJia wrote:
DVI to HDMI on one of my displays: https://forums.developer.nvidia.com/t/b … een/298311
I'm putting this post here in case it helps anyone else experiencing the same problem
Same for me (X11+Plasma).
<49,17,III,I> Fama di loro il mondo esser non lassa;
<50,17,III,I> misericordia e giustizia li sdegna:
<51,17,III,I> non ragioniam di lor, ma guarda e passa.
Offline
#3 2024-07-03 18:54:53
- ReD55
- Member
- Registered: 2022-07-14
- Posts: 5
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
I am having the same issue on my triple Mointore Setup (X11 + bspwm)
DVI-D-0 only to be specific.
tty works on boot, but once nvidia + X11 is started. My main monitore stops working even after Xorg is killed.
Everything seems to be able to recognize them, but it is still black.
DVI-D-0 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 544mm x 303mm
1920x1080 60.00*+ 59.94 50.00
1280x720 59.94 50.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94 59.93
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00*+ 59.94 50.00 60.05 60.00 50.04
1680x1050 59.95
1280x1024 60.02
1280x960 60.00
1280x720 60.00 59.94 50.00
1152x864 60.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94 59.93
DP-0 connected 1920x1080+3840+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00*+ 59.94 50.00
1680x1050 59.95
1280x1024 60.02
1280x960 60.00
1280x720 60.00 59.94 50.00
1152x864 60.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94 59.93
DP-1 disconnected (normal left inverted right x axis y axis)
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[ 23.438] Current Operating System: Linux workstation 6.9.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 28 Jun 2024 04:32:50 +0000 x86_64
[ 23.438] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0fccba3b-05de-45c0-b4b3-6224803372ed rw loglevel=3 quiet
[ 23.438]
[ 23.439] Current version of pixman: 0.43.4
[ 23.439] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.439] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.439] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 3 20:30:13 2024
[ 23.448] (==) Using config file: "/etc/X11/xorg.conf"
[ 23.448] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.448] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.450] (==) ServerLayout "X.org Configured"
[ 23.450] (**) |-->Screen "Screen0" (0)
[ 23.450] (**) | |-->Monitor "Monitor0"
[ 23.451] (**) | |-->Device "Card0"
[ 23.451] (**) |-->Input Device "Mouse0"
[ 23.451] (**) |-->Input Device "Keyboard0"
[ 23.451] (==) Automatically adding devices
[ 23.451] (==) Automatically enabling devices
[ 23.451] (==) Automatically adding GPU devices
[ 23.451] (==) Automatically binding GPU devices
[ 23.451] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 23.457] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 23.457] Entry deleted from font path.
[ 23.460] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 23.460] Entry deleted from font path.
[ 23.460] (**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi,
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 23.460] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 23.460] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 23.460] (WW) Disabling Mouse0
[ 23.460] (WW) Disabling Keyboard0
[ 23.460] (II) Module ABI versions:
[ 23.460] X.Org ANSI C Emulation: 0.4
[ 23.460] X.Org Video Driver: 25.2
[ 23.460] X.Org XInput driver : 24.4
[ 23.460] X.Org Server Extension : 10.0
[ 23.461] (++) using VT number 1
[ 23.461] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 23.462] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 23.462] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/drm/card1
[ 23.463] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[ 23.463] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.463] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/simple-framebuffer.0/drm/card0
[ 23.463] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[ 23.466] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 23.466] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 23.466] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[ 23.469] (--) PCI:*(9@0:0:0) 10de:1c82:19da:1454 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 23.469] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23.469] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 23.469] (II) LoadModule: "glx"
[ 23.472] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.480] (II) Module glx: vendor="X.Org Foundation"
[ 23.480] compiled for 1.21.1.11, module version = 1.0.0
[ 23.480] ABI class: X.Org Server Extension, version 10.0
[ 23.480] (II) LoadModule: "nvidia"
[ 23.480] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 23.487] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 23.487] compiled for 1.6.99.901, module version = 1.0.0
[ 23.487] Module class: X.Org Video Driver
[ 23.488] (II) NVIDIA dlloader X Driver 555.58 Tue Jun 18 20:27:01 UTC 2024
[ 23.488] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23.488] (II) systemd-logind: releasing fd for 226:1
[ 23.490] (II) Loading sub module "fb"
[ 23.490] (II) LoadModule: "fb"
[ 23.490] (II) Module "fb" already built-in
[ 23.490] (II) Loading sub module "wfb"
[ 23.490] (II) LoadModule: "wfb"
[ 23.490] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 23.491] (II) Module wfb: vendor="X.Org Foundation"
[ 23.491] compiled for 1.21.1.11, module version = 1.0.0
[ 23.491] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.493] (II) systemd-logind: releasing fd for 226:0
[ 23.493] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 23.493] (==) NVIDIA(0): RGB weight 888
[ 23.493] (==) NVIDIA(0): Default visual is TrueColor
[ 23.493] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.494] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 23.494] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 23.494] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 23.494] (**) NVIDIA(0): Enabling 2D acceleration
[ 23.494] (II) Loading sub module "glxserver_nvidia"
[ 23.494] (II) LoadModule: "glxserver_nvidia"
[ 23.494] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 23.657] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 23.657] compiled for 1.6.99.901, module version = 1.0.0
[ 23.657] Module class: X.Org Server Extension
[ 23.657] (II) NVIDIA GLX Module 555.58 Tue Jun 18 20:30:47 UTC 2024
[ 23.660] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 24.604] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[ 24.604] (--) NVIDIA(0): DFP-0 (boot)
[ 24.604] (--) NVIDIA(0): DFP-1
[ 24.604] (--) NVIDIA(0): DFP-2
[ 24.604] (--) NVIDIA(0): DFP-3
[ 24.605] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1050 Ti (GP107-A) at PCI:9:0:0
[ 24.605] (II) NVIDIA(0): (GPU-0)
[ 24.605] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 24.605] (--) NVIDIA(0): VideoBIOS: 86.07.59.00.11
[ 24.605] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 24.650] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[ 24.650] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[ 24.650] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[ 24.650] (--) NVIDIA(GPU-0):
[ 24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[ 24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[ 24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[ 24.694] (--) NVIDIA(GPU-0):
[ 24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[ 24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[ 24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[ 24.694] (--) NVIDIA(GPU-0):
[ 24.697] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 24.697] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 24.697] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 24.697] (--) NVIDIA(GPU-0):
[ 24.705] (==) NVIDIA(0):
[ 24.705] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 24.705] (==) NVIDIA(0): will be used as the requested mode.
[ 24.705] (==) NVIDIA(0):
[ 24.705] (II) NVIDIA(0): Validated MetaModes:
[ 24.705] (II) NVIDIA(0):
[ 24.705] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select,DFP-2:nvidia-auto-select"
[ 24.705] (II) NVIDIA(0): Virtual screen size determined to be 5760 x 1080
[ 24.709] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
[ 24.709] (--) NVIDIA(0): option
[ 24.709] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 24.709] (==) NVIDIA(G0): RGB weight 888
[ 24.709] (==) NVIDIA(G0): Default visual is TrueColor
[ 24.709] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 24.709] (**) NVIDIA(G0): Enabling 2D acceleration
[ 24.709] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 24.709] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[ 24.709] (EE) NVIDIA(G0): Failing initialization of X screen
[ 24.709] (II) UnloadModule: "nvidia"
[ 24.709] (II) UnloadSubModule: "wfb"
[ 24.709] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[ 24.709] (II) NVIDIA(GPU-1): Deleting GPU-1
[ 24.709] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 24.710] (II) NVIDIA: access.
[ 24.712] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 24.712] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 24.712] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 24.712] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 24.712] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 24.712] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 24.712] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 24.712] (II) NVIDIA(0): Config Options in the README.
[ 24.732] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select,DFP-2:nvidia-auto-select"
[ 24.882] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 24.882] (==) NVIDIA(0): Backing store enabled
[ 24.882] (==) NVIDIA(0): Silken mouse enabled
[ 24.883] (==) NVIDIA(0): DPMS enabled
[ 24.883] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 24.883] (II) Loading sub module "dri2"
[ 24.883] (II) LoadModule: "dri2"
[ 24.883] (II) Module "dri2" already built-in
[ 24.883] (II) NVIDIA(0): [DRI2] Setup complete
[ 24.883] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 24.883] (II) Initializing extension Generic Event Extension
[ 24.883] (II) Initializing extension SHAPE
[ 24.883] (II) Initializing extension MIT-SHM
[ 24.883] (II) Initializing extension XInputExtension
[ 24.883] (II) Initializing extension XTEST
[ 24.883] (II) Initializing extension BIG-REQUESTS
[ 24.883] (II) Initializing extension SYNC
[ 24.883] (II) Initializing extension XKEYBOARD
[ 24.883] (II) Initializing extension XC-MISC
[ 24.883] (II) Initializing extension SECURITY
[ 24.884] (II) Initializing extension XFIXES
[ 24.884] (II) Initializing extension RENDER
[ 24.884] (II) Initializing extension RANDR
[ 24.884] (II) Initializing extension COMPOSITE
[ 24.884] (II) Initializing extension DAMAGE
[ 24.884] (II) Initializing extension MIT-SCREEN-SAVER
[ 24.884] (II) Initializing extension DOUBLE-BUFFER
[ 24.884] (II) Initializing extension RECORD
[ 24.884] (II) Initializing extension DPMS
[ 24.884] (II) Initializing extension Present
[ 24.884] (II) Initializing extension DRI3
[ 24.884] (II) Initializing extension X-Resource
[ 24.884] (II) Initializing extension XVideo
[ 24.884] (II) Initializing extension XVideo-MotionCompensation
[ 24.884] (II) Initializing extension GLX
[ 24.884] (II) Initializing extension GLX
[ 24.884] (II) Indirect GLX disabled.
[ 24.885] (II) GLX: Another vendor is already registered for screen 0
[ 24.885] (II) Initializing extension XFree86-VidModeExtension
[ 24.885] (II) Initializing extension XFree86-DGA
[ 24.885] (II) Initializing extension XFree86-DRI
[ 24.885] (II) Initializing extension DRI2
[ 24.885] (II) Initializing extension NV-GLX
[ 24.885] (II) Initializing extension NV-CONTROL
[ 24.885] (II) Initializing extension XINERAMA
[ 25.206] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 25.207] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.207] (**) Power Button: Applying InputClass "system-keyboard"
[ 25.207] (II) LoadModule: "libinput"
[ 25.207] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 25.212] (II) Module libinput: vendor="X.Org Foundation"
[ 25.212] compiled for 1.21.1.8, module version = 1.4.0
[ 25.212] Module class: X.Org XInput Driver
[ 25.212] ABI class: X.Org XInput driver, version 24.4
[ 25.212] (II) Using input driver 'libinput' for 'Power Button'
[ 25.213] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[ 25.213] (**) Power Button: always reports core events
[ 25.213] (**) Option "Device" "/dev/input/event1"
[ 25.219] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 25.219] (II) event1 - Power Button: device is a keyboard
[ 25.219] (II) event1 - Power Button: device removed
[ 25.219] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 25.219] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.219] (**) Option "xkb_model" "pc105"
[ 25.219] (**) Option "xkb_layout" "de"
[ 25.219] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.238] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 25.238] (II) event1 - Power Button: device is a keyboard
[ 25.239] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 25.239] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.239] (**) Power Button: Applying InputClass "system-keyboard"
[ 25.239] (II) Using input driver 'libinput' for 'Power Button'
[ 25.240] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 44 paused 0
[ 25.240] (**) Power Button: always reports core events
[ 25.240] (**) Option "Device" "/dev/input/event0"
[ 25.241] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 25.241] (II) event0 - Power Button: device is a keyboard
[ 25.241] (II) event0 - Power Button: device removed
[ 25.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 25.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 25.241] (**) Option "xkb_model" "pc105"
[ 25.241] (**) Option "xkb_layout" "de"
[ 25.241] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.242] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 25.242] (II) event0 - Power Button: device is a keyboard
[ 25.242] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event4)
[ 25.242] (II) No input driver specified, ignoring this device.
[ 25.242] (II) This device may have been added with another device file.
[ 25.243] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event5)
[ 25.243] (II) No input driver specified, ignoring this device.
[ 25.243] (II) This device may have been added with another device file.
[ 25.243] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[ 25.243] (II) No input driver specified, ignoring this device.
[ 25.243] (II) This device may have been added with another device file.
[ 25.244] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[ 25.244] (II) No input driver specified, ignoring this device.
[ 25.244] (II) This device may have been added with another device file.
[ 25.245] (II) config/udev: Adding input device Kingston HyperX Quadcast Consumer Control (/dev/input/event18)
[ 25.245] (**) Kingston HyperX Quadcast Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 25.245] (**) Kingston HyperX Quadcast Consumer Control: Applying InputClass "system-keyboard"
[ 25.245] (II) Using input driver 'libinput' for 'Kingston HyperX Quadcast Consumer Control'
[ 25.246] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 45 paused 0
[ 25.246] (**) Kingston HyperX Quadcast Consumer Control: always reports core events
[ 25.246] (**) Option "Device" "/dev/input/event18"
[ 25.248] (II) event18 - Kingston HyperX Quadcast Consumer Control: is tagged by udev as: Keyboard
[ 25.248] (II) event18 - Kingston HyperX Quadcast Consumer Control: device is a keyboard
[ 25.248] (II) event18 - Kingston HyperX Quadcast Consumer Control: device removed
[ 25.248] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.1/3-3.1.1.4.1:1.3/0003:0951:16DF.0008/input/input18/event18"
[ 25.248] (II) XINPUT: Adding extended input device "Kingston HyperX Quadcast Consumer Control" (type: KEYBOARD, id 8)
[ 25.248] (**) Option "xkb_model" "pc105"
[ 25.248] (**) Option "xkb_layout" "de"
[ 25.248] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.250] (II) event18 - Kingston HyperX Quadcast Consumer Control: is tagged by udev as: Keyboard
[ 25.250] (II) event18 - Kingston HyperX Quadcast Consumer Control: device is a keyboard
[ 25.251] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event19)
[ 25.251] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[ 25.251] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502'
[ 25.307] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 46 paused 0
[ 25.307] (**) Logitech Gaming Mouse G502: always reports core events
[ 25.307] (**) Option "Device" "/dev/input/event19"
[ 25.309] (II) event19 - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[ 25.309] (II) event19 - Logitech Gaming Mouse G502: device set to 2400 DPI
[ 25.309] (II) event19 - Logitech Gaming Mouse G502: device is a pointer
[ 25.309] (II) event19 - Logitech Gaming Mouse G502: device removed
[ 25.309] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.309] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.309] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.309] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.3/3-3.1.1.4.3:1.0/0003:046D:C332.0009/input/input20/event19"
[ 25.309] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 9)
[ 25.310] (**) Option "AccelerationScheme" "none"
[ 25.310] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0
[ 25.310] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[ 25.310] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[ 25.311] (II) event19 - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[ 25.311] (II) event19 - Logitech Gaming Mouse G502: device set to 2400 DPI
[ 25.312] (II) event19 - Logitech Gaming Mouse G502: device is a pointer
[ 25.313] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse3)
[ 25.313] (II) No input driver specified, ignoring this device.
[ 25.313] (II) This device may have been added with another device file.
[ 25.314] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event20)
[ 25.314] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[ 25.314] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard"
[ 25.314] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[ 25.315] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 47 paused 0
[ 25.315] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[ 25.315] (**) Option "Device" "/dev/input/event20"
[ 25.317] (II) event20 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[ 25.317] (II) event20 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[ 25.317] (II) event20 - Logitech Gaming Mouse G502 Keyboard: device removed
[ 25.317] (II) libinput: Logitech Gaming Mouse G502 Keyboard: needs a virtual subdevice
[ 25.317] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.3/3-3.1.1.4.3:1.1/0003:046D:C332.000A/input/input21/event20"
[ 25.317] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: MOUSE, id 10)
[ 25.317] (**) Option "AccelerationScheme" "none"
[ 25.317] (**) Logitech Gaming Mouse G502 Keyboard: (accel) selected scheme none/0
[ 25.317] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration factor: 2.000
[ 25.317] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration threshold: 4
[ 25.319] (II) event20 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[ 25.319] (II) event20 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[ 25.320] (II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event15)
[ 25.320] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall"
[ 25.320] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "system-keyboard"
[ 25.320] (II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID'
[ 25.321] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 48 paused 0
[ 25.321] (**) Yubico YubiKey OTP+FIDO+CCID: always reports core events
[ 25.321] (**) Option "Device" "/dev/input/event15"
[ 25.323] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[ 25.323] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[ 25.323] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: device removed
[ 25.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.4/3-3.1.1.4.4:1.0/0003:1050:0407.000B/input/input24/event15"
[ 25.323] (II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 11)
[ 25.323] (**) Option "xkb_model" "pc105"
[ 25.323] (**) Option "xkb_layout" "de"
[ 25.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.325] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[ 25.325] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[ 25.326] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event3)
[ 25.326] (**) HID 0c45:7403: Applying InputClass "libinput keyboard catchall"
[ 25.326] (**) HID 0c45:7403: Applying InputClass "system-keyboard"
[ 25.326] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[ 25.327] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 49 paused 0
[ 25.327] (**) HID 0c45:7403: always reports core events
[ 25.327] (**) Option "Device" "/dev/input/event3"
[ 25.329] (II) event3 - HID 0c45:7403: is tagged by udev as: Keyboard
[ 25.329] (II) event3 - HID 0c45:7403: device is a keyboard
[ 25.329] (II) event3 - HID 0c45:7403: device removed
[ 25.329] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.2/3-3.2:1.0/0003:0C45:7403.0001/input/input3/event3"
[ 25.329] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: KEYBOARD, id 12)
[ 25.329] (**) Option "xkb_model" "pc105"
[ 25.329] (**) Option "xkb_layout" "de"
[ 25.329] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.331] (II) event3 - HID 0c45:7403: is tagged by udev as: Keyboard
[ 25.331] (II) event3 - HID 0c45:7403: device is a keyboard
[ 25.332] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event9)
[ 25.332] (**) HID 0c45:7403: Applying InputClass "libinput pointer catchall"
[ 25.332] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[ 25.387] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 50 paused 0
[ 25.387] (**) HID 0c45:7403: always reports core events
[ 25.387] (**) Option "Device" "/dev/input/event9"
[ 25.389] (II) event9 - HID 0c45:7403: is tagged by udev as: Mouse
[ 25.389] (II) event9 - HID 0c45:7403: device is a pointer
[ 25.389] (II) event9 - HID 0c45:7403: device removed
[ 25.389] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.389] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.389] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.389] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.2/3-3.2:1.1/0003:0C45:7403.0002/input/input13/event9"
[ 25.389] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: MOUSE, id 13)
[ 25.389] (**) Option "AccelerationScheme" "none"
[ 25.389] (**) HID 0c45:7403: (accel) selected scheme none/0
[ 25.389] (**) HID 0c45:7403: (accel) acceleration factor: 2.000
[ 25.389] (**) HID 0c45:7403: (accel) acceleration threshold: 4
[ 25.390] (II) event9 - HID 0c45:7403: is tagged by udev as: Mouse
[ 25.391] (II) event9 - HID 0c45:7403: device is a pointer
[ 25.391] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/mouse0)
[ 25.391] (II) No input driver specified, ignoring this device.
[ 25.391] (II) This device may have been added with another device file.
[ 25.392] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event14)
[ 25.392] (**) HID 0c45:7403: Applying InputClass "libinput keyboard catchall"
[ 25.392] (**) HID 0c45:7403: Applying InputClass "system-keyboard"
[ 25.392] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[ 25.393] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 51 paused 0
[ 25.393] (**) HID 0c45:7403: always reports core events
[ 25.393] (**) Option "Device" "/dev/input/event14"
[ 25.395] (II) event14 - HID 0c45:7403: is tagged by udev as: Keyboard
[ 25.395] (II) event14 - HID 0c45:7403: device is a keyboard
[ 25.395] (II) event14 - HID 0c45:7403: device removed
[ 25.395] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.3/3-3.3:1.0/0003:0C45:7403.0003/input/input14/event14"
[ 25.395] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: KEYBOARD, id 14)
[ 25.395] (**) Option "xkb_model" "pc105"
[ 25.395] (**) Option "xkb_layout" "de"
[ 25.395] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.397] (II) event14 - HID 0c45:7403: is tagged by udev as: Keyboard
[ 25.397] (II) event14 - HID 0c45:7403: device is a keyboard
[ 25.398] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event16)
[ 25.398] (**) HID 0c45:7403: Applying InputClass "libinput pointer catchall"
[ 25.398] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[ 25.454] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 52 paused 0
[ 25.454] (**) HID 0c45:7403: always reports core events
[ 25.454] (**) Option "Device" "/dev/input/event16"
[ 25.455] (II) event16 - HID 0c45:7403: is tagged by udev as: Mouse
[ 25.455] (II) event16 - HID 0c45:7403: device is a pointer
[ 25.456] (II) event16 - HID 0c45:7403: device removed
[ 25.456] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.456] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.456] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.3/3-3.3:1.1/0003:0C45:7403.0004/input/input17/event16"
[ 25.456] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: MOUSE, id 15)
[ 25.456] (**) Option "AccelerationScheme" "none"
[ 25.456] (**) HID 0c45:7403: (accel) selected scheme none/0
[ 25.456] (**) HID 0c45:7403: (accel) acceleration factor: 2.000
[ 25.456] (**) HID 0c45:7403: (accel) acceleration threshold: 4
[ 25.457] (II) event16 - HID 0c45:7403: is tagged by udev as: Mouse
[ 25.457] (II) event16 - HID 0c45:7403: device is a pointer
[ 25.458] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/mouse1)
[ 25.458] (II) No input driver specified, ignoring this device.
[ 25.458] (II) This device may have been added with another device file.
[ 25.458] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event11)
[ 25.458] (II) No input driver specified, ignoring this device.
[ 25.458] (II) This device may have been added with another device file.
[ 25.459] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event12)
[ 25.459] (II) No input driver specified, ignoring this device.
[ 25.459] (II) This device may have been added with another device file.
[ 25.459] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event13)
[ 25.459] (II) No input driver specified, ignoring this device.
[ 25.459] (II) This device may have been added with another device file.
[ 25.460] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event6)
[ 25.460] (II) No input driver specified, ignoring this device.
[ 25.460] (II) This device may have been added with another device file.
[ 25.460] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event7)
[ 25.460] (II) No input driver specified, ignoring this device.
[ 25.460] (II) This device may have been added with another device file.
[ 25.460] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 25.460] (II) No input driver specified, ignoring this device.
[ 25.460] (II) This device may have been added with another device file.
[ 25.463] (II) config/udev: Adding input device ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB (/dev/input/event17)
[ 25.463] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: Applying InputClass "libinput keyboard catchall"
[ 25.463] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: Applying InputClass "system-keyboard"
[ 25.463] (II) Using input driver 'libinput' for 'ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB'
[ 25.464] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 53 paused 0
[ 25.464] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: always reports core events
[ 25.464] (**) Option "Device" "/dev/input/event17"
[ 25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: is tagged by udev as: Keyboard
[ 25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: device is a keyboard
[ 25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: device removed
[ 25.465] (**) Option "config_info" "udev:/sys/devices/virtual/input/input25/event17"
[ 25.465] (II) XINPUT: Adding extended input device "ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB" (type: KEYBOARD, id 16)
[ 25.465] (**) Option "xkb_model" "pc105"
[ 25.465] (**) Option "xkb_layout" "de"
[ 25.465] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: is tagged by udev as: Keyboard
[ 25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: device is a keyboard
[ 25.466] (II) config/udev: Adding input device ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM (/dev/input/event21)
[ 25.466] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Applying InputClass "libinput pointer catchall"
[ 25.466] (II) Using input driver 'libinput' for 'ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM'
[ 25.467] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 54 paused 0
[ 25.467] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: always reports core events
[ 25.467] (**) Option "Device" "/dev/input/event21"
[ 25.467] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: is tagged by udev as: Mouse
[ 25.467] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: device is a pointer
[ 25.468] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: device removed
[ 25.468] (II) libinput: ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.468] (II) libinput: ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.468] (II) libinput: ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 25.468] (**) Option "config_info" "udev:/sys/devices/virtual/input/input26/event21"
[ 25.468] (II) XINPUT: Adding extended input device "ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM" (type: MOUSE, id 17)
[ 25.468] (**) Option "AccelerationScheme" "none"
[ 25.468] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: (accel) selected scheme none/0
[ 25.468] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: (accel) acceleration factor: 2.000
[ 25.468] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: (accel) acceleration threshold: 4
[ 25.468] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: is tagged by udev as: Mouse
[ 25.468] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: device is a pointer
[ 25.469] (II) config/udev: Adding input device ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM (/dev/input/mouse2)
[ 25.469] (II) No input driver specified, ignoring this device.
[ 25.469] (II) This device may have been added with another device file.
[ 25.473] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[ 25.473] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard"
[ 25.473] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[ 25.473] (II) systemd-logind: returning pre-existing fd for /dev/input/event20 13:84
[ 25.473] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[ 25.473] (**) Option "Device" "/dev/input/event20"
[ 25.473] (II) libinput: Logitech Gaming Mouse G502 Keyboard: is a virtual subdevice
[ 25.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.3/3-3.1.1.4.3:1.1/0003:046D:C332.000A/input/input21/event20"
[ 25.473] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 18)
[ 25.473] (**) Option "xkb_model" "pc105"
[ 25.473] (**) Option "xkb_layout" "de"
[ 25.473] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 25.473] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[ 25.473] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[ 25.473] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[ 25.473] (--) NVIDIA(GPU-0):
[ 25.710] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DP-0: nvidia-auto-select @1920x1080 +3840+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 25.979] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DP-0: nvidia-auto-select @1920x1080 +3840+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 26.295] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[ 26.295] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[ 26.295] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[ 26.295] (--) NVIDIA(GPU-0):
[ 26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[ 26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[ 26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[ 26.339] (--) NVIDIA(GPU-0):
[ 26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[ 26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[ 26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[ 26.339] (--) NVIDIA(GPU-0):
[ 26.341] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 26.341] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 26.341] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 26.341] (--) NVIDIA(GPU-0):
[ 185.226] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[ 185.226] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[ 185.226] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[ 185.226] (--) NVIDIA(GPU-0):
[ 185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[ 185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[ 185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[ 185.270] (--) NVIDIA(GPU-0):
[ 185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[ 185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[ 185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[ 185.270] (--) NVIDIA(GPU-0):
[ 185.272] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 185.272] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 185.272] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 185.272] (--) NVIDIA(GPU-0):
[ 185.320] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[ 185.320] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[ 185.320] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[ 185.320] (--) NVIDIA(GPU-0):
[ 185.364] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[ 185.364] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[ 185.364] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[ 185.364] (--) NVIDIA(GPU-0):
[ 185.365] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[ 185.365] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[ 185.365] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[ 185.365] (--) NVIDIA(GPU-0):
[ 185.367] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 185.367] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 185.367] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 185.367] (--) NVIDIA(GPU-0):
[ 635.152] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[ 635.152] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[ 635.152] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[ 635.152] (--) NVIDIA(GPU-0):
[ 635.195] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[ 635.195] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[ 635.195] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[ 635.195] (--) NVIDIA(GPU-0):
[ 635.196] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[ 635.196] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[ 635.196] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[ 635.196] (--) NVIDIA(GPU-0):
[ 635.198] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 635.198] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 635.198] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 635.198] (--) NVIDIA(GPU-0): Offline
#4 2024-07-03 20:08:06
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,203
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
DVI is on the record to be broken in 555, other connector methods seem to work fine: https://bbs.archlinux.org/viewtopic.php?id=297296
Offline
#5 2024-07-06 16:58:35
- ReD55
- Member
- Registered: 2022-07-14
- Posts: 5
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
So the fix that worked for me was downgrading to nvidia-dkms 550
and using linux-lts with linux-lts-headers
sudo pacman -Rns nvidia nvidia-utils nvidia-settings
sudo downgrade nvidia-dkms
sudo downgrade nvidia-utils
sudo downgrade nvidia-settingsOffline
#6 2024-07-09 10:04:29
- proofx
- Member
- Registered: 2024-07-09
- Posts: 2
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
ReD55 wrote:
So the fix that worked for me was downgrading to nvidia-dkms 550
and using linux-lts with linux-lts-headerssudo pacman -Rns nvidia nvidia-utils nvidia-settings sudo downgrade nvidia-dkms sudo downgrade nvidia-utils sudo downgrade nvidia-settings
downgraded nvidia stuff to 550 and installed linux and headers for 6.6, still doesn't work. any other ideas?
Offline
#7 2024-07-09 13:27:19
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,203
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
That should and does work for the majority of people, but "doesn't work" is not an error message. What exactly did you downgrade how? What output do you get from
dkms status
pacman -Qs 'kernel|nvidia'Offline
#8 2024-07-17 04:56:40
- proofx
- Member
- Registered: 2024-07-09
- Posts: 2
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
V1del wrote:
That should and does work for the majority of people, but "doesn't work" is not an error message. What exactly did you downgrade how? What output do you get from
dkms status pacman -Qs 'kernel|nvidia'
dkms status output:
nvidia/550.90.07, 6.6.10-arch1-1, x86_64: installedpacman -Qs 'kernel|nvidia' output:
local/dkms 3.0.12-1
Dynamic Kernel Modules System
local/egl-wayland 2:1.1.13-2
EGLStream-based Wayland external platform
local/fuse2 2.9.9-5
Interface for userspace programs to export a filesystem to the Linux kernel
local/iptables 1:1.8.10-2
Linux kernel packet control tool (using legacy interface)
local/kmod 32-1
Linux kernel module management tools and library
local/libdrm 2.4.122-1
Userspace interface to kernel DRM services
local/libnetfilter_conntrack 1.0.9-2
Library providing an API to the in-kernel connection tracking state table
local/libnfnetlink 1.0.2-2
Low-level library for netfilter related kernel/userspace communication
local/libsysprof-capture 46.0-3
Kernel based performance profiler - capture library
local/linux 6.6.10.arch1-1
The Linux kernel and modules
local/linux-api-headers 6.8-1
Kernel headers sanitized for use in userspace
local/linux-headers 6.6.10.arch1-1
Headers and scripts for building modules for the Linux kernel
local/mtdev 1.1.7-1
A stand-alone library which transforms all variants of kernel MT events to the slotted type B protocol
local/nvidia-dkms 550.90.07-4
NVIDIA drivers - module sources
local/nvidia-utils 550.90.07-4
NVIDIA drivers utilitiesi downgraded linux, linux-headers to 6.6 and removed and used downgrade package to install nvidia-dkms 550.90
im not sure what else to show but here's my xrandr output:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary (normal left inverted right x axis y axis)
1024x768 60.00 +
1600x900 59.82
1400x900 59.88
1368x768 59.88 59.85
1280x800 59.91 59.81
1280x720 59.86 59.74
1024x576 59.90 59.82
960x540 59.82 59.63
864x486 59.92 59.57
800x600 72.19 60.32 56.25
800x450 59.82
700x450 59.88
684x384 59.88 59.85
640x480 59.94
640x400 59.98 59.88
640x360 59.86 59.83
512x384 60.00
512x288 60.00 59.92
480x270 59.82 59.63
432x243 59.92 59.57
400x300 72.19 60.32 56.34
320x240 60.05
eDP-1-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1920x1080 144.00*+ 60.01 59.97 59.96 60.00 59.93
1680x1050 59.95 59.88
1400x1050 74.76 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 85.02 75.02 60.02
1400x900 59.96 59.88
1280x960 85.00 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1280x800 59.99 59.97 59.81 59.91
1152x864 75.00
1280x720 60.00 59.99 59.86 59.74
1024x768 85.00 75.05 60.04 85.00 75.03 70.07 60.00
1024x768i 86.96
960x720 85.00 75.00 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 85.00 75.00 70.00 65.00 60.00 85.14 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 85.02 75.02 60.02
700x450 59.96 59.88
640x480 85.09 60.00 85.01 72.81 75.00 59.94
720x405 59.51 58.99
720x400 85.04
684x384 59.88 59.85
640x400 59.88 59.98 85.08
576x432 75.00
640x360 59.86 59.83 59.84 59.32
640x350 85.08
512x384 85.00 75.03 70.07 60.00
512x384i 87.06
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 85.27 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 85.18 72.81 75.00 60.05
360x202 59.51 59.13
360x200 85.04
320x200 85.27
320x180 59.84 59.32
320x175 85.27
HDMI-1-1 disconnected (normal left inverted right x axis y axis)
1600x900 (0x20c) 97.500MHz +HSync -VSync
h: width 1600 start 1648 end 1680 total 1760 skew 0 clock 55.40KHz
v: height 900 start 903 end 908 total 926 clock 59.82Hz
1400x900 (0x20f) 86.500MHz +HSync -VSync
h: width 1400 start 1448 end 1480 total 1560 skew 0 clock 55.45KHz
v: height 900 start 903 end 913 total 926 clock 59.88Hz
1368x768 (0x213) 85.250MHz -HSync +VSync
h: width 1368 start 1440 end 1576 total 1784 skew 0 clock 47.79KHz
v: height 768 start 771 end 781 total 798 clock 59.88Hz
1368x768 (0x214) 72.250MHz +HSync -VSync
h: width 1368 start 1416 end 1448 total 1528 skew 0 clock 47.28KHz
v: height 768 start 771 end 781 total 790 clock 59.85Hz
1280x800 (0x217) 83.500MHz -HSync +VSync
h: width 1280 start 1352 end 1480 total 1680 skew 0 clock 49.70KHz
v: height 800 start 803 end 809 total 831 clock 59.81Hz
1280x800 (0x218) 71.000MHz +HSync -VSync
h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 49.31KHz
v: height 800 start 803 end 809 total 823 clock 59.91Hz
1280x720 (0x21b) 74.500MHz -HSync +VSync
h: width 1280 start 1344 end 1472 total 1664 skew 0 clock 44.77KHz
v: height 720 start 723 end 728 total 748 clock 59.86Hz
1280x720 (0x21c) 63.750MHz +HSync -VSync
h: width 1280 start 1328 end 1360 total 1440 skew 0 clock 44.27KHz
v: height 720 start 723 end 728 total 741 clock 59.74Hz
1024x768 (0x1d1) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
1024x576 (0x22b) 46.500MHz -HSync +VSync
h: width 1024 start 1064 end 1160 total 1296 skew 0 clock 35.88KHz
v: height 576 start 579 end 584 total 599 clock 59.90Hz
1024x576 (0x22c) 42.000MHz +HSync -VSync
h: width 1024 start 1072 end 1104 total 1184 skew 0 clock 35.47KHz
v: height 576 start 579 end 584 total 593 clock 59.82Hz
960x540 (0x232) 40.750MHz -HSync +VSync
h: width 960 start 992 end 1088 total 1216 skew 0 clock 33.51KHz
v: height 540 start 543 end 548 total 562 clock 59.63Hz
960x540 (0x233) 37.250MHz +HSync -VSync
h: width 960 start 1008 end 1040 total 1120 skew 0 clock 33.26KHz
v: height 540 start 543 end 548 total 556 clock 59.82Hz
800x600 (0x1d3) 50.000MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.08KHz
v: height 600 start 637 end 643 total 666 clock 72.19Hz
800x600 (0x1d4) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x1d5) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
864x486 (0x23c) 32.500MHz -HSync +VSync
h: width 864 start 888 end 968 total 1072 skew 0 clock 30.32KHz
v: height 486 start 489 end 494 total 506 clock 59.92Hz
864x486 (0x23d) 30.500MHz +HSync -VSync
h: width 864 start 912 end 944 total 1024 skew 0 clock 29.79KHz
v: height 486 start 489 end 494 total 500 clock 59.57Hz
800x450 (0x241) 48.750MHz +HSync -VSync DoubleScan
h: width 800 start 824 end 840 total 880 skew 0 clock 55.40KHz
v: height 450 start 451 end 454 total 463 clock 59.82Hz
700x450 (0x246) 43.250MHz +HSync -VSync DoubleScan
h: width 700 start 724 end 740 total 780 skew 0 clock 55.45KHz
v: height 450 start 451 end 456 total 463 clock 59.88Hz
640x480 (0x1da) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
684x384 (0x24e) 42.625MHz -HSync +VSync DoubleScan
h: width 684 start 720 end 788 total 892 skew 0 clock 47.79KHz
v: height 384 start 385 end 390 total 399 clock 59.88Hz
684x384 (0x24f) 36.125MHz +HSync -VSync DoubleScan
h: width 684 start 708 end 724 total 764 skew 0 clock 47.28KHz
v: height 384 start 385 end 390 total 395 clock 59.85Hz
640x400 (0x250) 41.750MHz -HSync +VSync DoubleScan
h: width 640 start 676 end 740 total 840 skew 0 clock 49.70KHz
v: height 400 start 401 end 404 total 415 clock 59.88Hz
640x400 (0x251) 35.500MHz +HSync -VSync DoubleScan
h: width 640 start 664 end 680 total 720 skew 0 clock 49.31KHz
v: height 400 start 401 end 404 total 411 clock 59.98Hz
640x360 (0x254) 37.250MHz -HSync +VSync DoubleScan
h: width 640 start 672 end 736 total 832 skew 0 clock 44.77KHz
v: height 360 start 361 end 364 total 374 clock 59.86Hz
640x360 (0x255) 31.875MHz +HSync -VSync DoubleScan
h: width 640 start 664 end 680 total 720 skew 0 clock 44.27KHz
v: height 360 start 361 end 364 total 370 clock 59.83Hz
512x384 (0x25c) 32.500MHz -HSync -VSync DoubleScan
h: width 512 start 524 end 592 total 672 skew 0 clock 48.36KHz
v: height 384 start 385 end 388 total 403 clock 60.00Hz
512x288 (0x25e) 23.250MHz -HSync +VSync DoubleScan
h: width 512 start 532 end 580 total 648 skew 0 clock 35.88KHz
v: height 288 start 289 end 292 total 299 clock 60.00Hz
512x288 (0x25f) 21.000MHz +HSync -VSync DoubleScan
h: width 512 start 536 end 552 total 592 skew 0 clock 35.47KHz
v: height 288 start 289 end 292 total 296 clock 59.92Hz
480x270 (0x261) 20.375MHz -HSync +VSync DoubleScan
h: width 480 start 496 end 544 total 608 skew 0 clock 33.51KHz
v: height 270 start 271 end 274 total 281 clock 59.63Hz
480x270 (0x262) 18.625MHz +HSync -VSync DoubleScan
h: width 480 start 504 end 520 total 560 skew 0 clock 33.26KHz
v: height 270 start 271 end 274 total 278 clock 59.82Hz
400x300 (0x264) 25.000MHz +HSync +VSync DoubleScan
h: width 400 start 428 end 488 total 520 skew 0 clock 48.08KHz
v: height 300 start 318 end 321 total 333 clock 72.19Hz
400x300 (0x266) 20.000MHz +HSync +VSync DoubleScan
h: width 400 start 420 end 484 total 528 skew 0 clock 37.88KHz
v: height 300 start 300 end 302 total 314 clock 60.32Hz
400x300 (0x267) 18.000MHz +HSync +VSync DoubleScan
h: width 400 start 412 end 448 total 512 skew 0 clock 35.16KHz
v: height 300 start 300 end 301 total 312 clock 56.34Hz
432x243 (0x268) 16.250MHz -HSync +VSync DoubleScan
h: width 432 start 444 end 484 total 536 skew 0 clock 30.32KHz
v: height 243 start 244 end 247 total 253 clock 59.92Hz
432x243 (0x269) 15.250MHz +HSync -VSync DoubleScan
h: width 432 start 456 end 472 total 512 skew 0 clock 29.79KHz
v: height 243 start 244 end 247 total 250 clock 59.57Hz
320x240 (0x26d) 12.587MHz -HSync -VSync DoubleScan
h: width 320 start 328 end 376 total 400 skew 0 clock 31.47KHz
v: height 240 start 245 end 246 total 262 clock 60.05Hzpreviously couple of weeks back it did not show HDMI-1-1 disconnected outputs aswell but now it does.
i tried with arandr aswell, it detects the monitor but it wont display anything. I've checked cables aswell its working fine with my windows machine and a ubuntu machine.
Offline
#9 2024-07-17 07:23:13
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,717
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
There's a deactivated output on HDMI-0 but it defaults to XGA, which is odd.
Does
xrandr --output HDMI-0 --autodo anything?
Offline
#10 2024-07-23 14:48:15
- phunni
- Member
- From: Bristol, UK
- Registered: 2003-08-13
- Posts: 787
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
Does anyone know if there's a time frame on when the next version of the driver will be released? I realise there's no guarantee that the next one will fix this bug, but I'm really hoping so as my whole system is frozen on older packages until this gets fixed...
Offline
#11 2024-07-23 15:32:33
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,717
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
my whole system is frozen on older packages until this gets fixed...
No it's not.
https://aur.archlinux.org/packages/nvidia-535xx-dkms
Offline
#12 2024-07-23 16:00:12
- phunni
- Member
- From: Bristol, UK
- Registered: 2003-08-13
- Posts: 787
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
seth wrote:
my whole system is frozen on older packages until this gets fixed...
No it's not.
https://aur.archlinux.org/packages/nvidia-535xx-dkms
Yes it is - I'm on an immutable system that, unfortunately, can't use dkms packages. https://github.com/cleanroom-team/cleanroom if you're interested.
Offline
#13 2024-07-23 22:02:01
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,717
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
Is nvidia-open an option?
Offline
#14 2024-07-24 22:07:32
- m2rsh
- Member
- Registered: 2024-07-04
- Posts: 4
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
seth wrote:
Is nvidia-open an option?
I tried both nvidia-open-beta-dkms and nvidia-beta-dkms (both 560.28.03-1) and my display connected via DVI is still not displaying anything here's my xorg log (running nvidia-open)
[ 6.624] (--) Log file renamed from "/var/log/Xorg.pid-728.log" to "/var/log/Xorg.0.log"
[ 6.625]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 6.625] Current Operating System: Linux archlinux 6.10.0-arch1-2 #1 SMP PREEMPT_DYNAMIC Mon, 22 Jul 2024 17:28:23 +0000 x86_64
[ 6.625] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=432be9cb-6657-4666-a749-ac9752f74169 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs nvidia_drm.modeset=1 nvidia.NVreg_PreserveVideoMemoryAllocations=1
[ 6.625]
[ 6.625] Current version of pixman: 0.43.4
[ 6.625] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.625] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.626] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 24 23:59:54 2024
[ 6.627] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.627] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.627] (==) ServerLayout "Layout0"
[ 6.627] (**) |-->Screen "Screen0" (0)
[ 6.627] (**) | |-->Monitor "Monitor0"
[ 6.627] (**) | |-->Device "Device0"
[ 6.627] (**) |-->Input Device "Keyboard0"
[ 6.627] (**) |-->Input Device "Mouse0"
[ 6.627] (**) Option "Xinerama" "0"
[ 6.627] (**) Allowing byte-swapped clients
[ 6.627] (==) Automatically adding devices
[ 6.627] (==) Automatically enabling devices
[ 6.627] (==) Automatically adding GPU devices
[ 6.627] (==) Automatically binding GPU devices
[ 6.627] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 6.628] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 6.628] Entry deleted from font path.
[ 6.628] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 6.628] Entry deleted from font path.
[ 6.628] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 6.628] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 6.628] Entry deleted from font path.
[ 6.628] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 6.628] Entry deleted from font path.
[ 6.628] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 6.628] Entry deleted from font path.
[ 6.628] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 6.628] Entry deleted from font path.
[ 6.628] (==) FontPath set to:
[ 6.628] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.628] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6.628] (WW) Disabling Keyboard0
[ 6.628] (WW) Disabling Mouse0
[ 6.628] (II) Module ABI versions:
[ 6.628] X.Org ANSI C Emulation: 0.4
[ 6.628] X.Org Video Driver: 25.2
[ 6.628] X.Org XInput driver : 24.4
[ 6.628] X.Org Server Extension : 10.0
[ 6.629] (++) using VT number 2
[ 6.629] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 6.629] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.629] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 6.630] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 6.631] (--) PCI:*(1@0:0:0) 10de:1f82:1458:4027 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 6.631] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.631] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 6.631] (II) LoadModule: "dbe"
[ 6.631] (II) Module "dbe" already built-in
[ 6.631] (II) LoadModule: "extmod"
[ 6.631] (II) Module "extmod" already built-in
[ 6.631] (II) LoadModule: "glx"
[ 6.631] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.646] (II) Module glx: vendor="X.Org Foundation"
[ 6.646] compiled for 1.21.1.13, module version = 1.0.0
[ 6.646] ABI class: X.Org Server Extension, version 10.0
[ 6.646] (II) LoadModule: "nvidia"
[ 6.646] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 6.662] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6.662] compiled for 1.6.99.901, module version = 1.0.0
[ 6.662] Module class: X.Org Video Driver
[ 6.662] (II) NVIDIA dlloader X Driver 560.28.03 Thu Jul 18 20:31:10 UTC 2024
[ 6.662] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6.663] (II) Loading sub module "fb"
[ 6.663] (II) LoadModule: "fb"
[ 6.663] (II) Module "fb" already built-in
[ 6.663] (II) Loading sub module "wfb"
[ 6.663] (II) LoadModule: "wfb"
[ 6.663] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6.664] (II) Module wfb: vendor="X.Org Foundation"
[ 6.664] compiled for 1.21.1.13, module version = 1.0.0
[ 6.664] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.664] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6.664] (==) NVIDIA(0): RGB weight 888
[ 6.664] (==) NVIDIA(0): Default visual is TrueColor
[ 6.664] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6.665] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 6.665] (**) NVIDIA(0): Option "Stereo" "0"
[ 6.665] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "HDMI-0"
[ 6.665] (**) NVIDIA(0): Option "SLI" "Off"
[ 6.665] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 6.665] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 6.665] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 6.665] (**) NVIDIA(0): Stereo disabled by request
[ 6.665] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 6.665] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 6.665] (**) NVIDIA(0): Option "MetaModes" "DVI-D-0: nvidia-auto-select +1920+0, HDMI-0: nvidia-auto-select +0+0"
[ 6.665] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.665] (II) Loading sub module "glxserver_nvidia"
[ 6.665] (II) LoadModule: "glxserver_nvidia"
[ 6.665] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 6.893] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 6.893] compiled for 1.6.99.901, module version = 1.0.0
[ 6.893] Module class: X.Org Server Extension
[ 6.893] (II) NVIDIA GLX Module 560.28.03 Thu Jul 18 20:39:53 UTC 2024
[ 6.893] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 6.895] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 6.895] (--) NVIDIA(0): DFP-0 (boot)
[ 6.895] (--) NVIDIA(0): DFP-1
[ 6.895] (--) NVIDIA(0): DFP-2
[ 6.895] (--) NVIDIA(0): DFP-3
[ 6.900] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1650 (TU117-A) at PCI:1:0:0
[ 6.900] (II) NVIDIA(0): (GPU-0)
[ 6.900] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 6.901] (--) NVIDIA(0): VideoBIOS: 90.17.4d.00.68
[ 6.901] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6.947] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[ 6.947] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[ 6.947] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 600.0 MHz maximum pixel clock
[ 6.947] (--) NVIDIA(GPU-0):
[ 6.947] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 6.947] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 6.947] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[ 6.947] (--) NVIDIA(GPU-0):
[ 6.947] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 6.947] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 6.947] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 6.947] (--) NVIDIA(GPU-0):
[ 6.992] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): connected
[ 6.992] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): Internal TMDS
[ 6.992] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): 600.0 MHz maximum pixel clock
[ 6.992] (--) NVIDIA(GPU-0):
[ 7.046] (II) NVIDIA(0): Validated MetaModes:
[ 7.046] (II) NVIDIA(0):
[ 7.046] (II) NVIDIA(0): "DVI-D-0:nvidia-auto-select+1920+0,HDMI-0:nvidia-auto-select+0+0"
[ 7.046] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[ 7.071] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 7.071] (--) NVIDIA(0): option
[ 7.072] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 7.072] (II) NVIDIA: access.
[ 7.082] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 7.082] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 7.082] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 7.082] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 7.082] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 7.082] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 7.082] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 7.082] (II) NVIDIA(0): Config Options in the README.
[ 7.103] (II) NVIDIA(0): Setting mode "DVI-D-0:nvidia-auto-select+1920+0,HDMI-0:nvidia-auto-select+0+0"
[ 7.135] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 7.135] (==) NVIDIA(0): Backing store enabled
[ 7.135] (==) NVIDIA(0): Silken mouse enabled
[ 7.135] (**) NVIDIA(0): DPMS enabled
[ 7.136] (II) Loading sub module "dri2"
[ 7.136] (II) LoadModule: "dri2"
[ 7.136] (II) Module "dri2" already built-in
[ 7.136] (II) NVIDIA(0): [DRI2] Setup complete
[ 7.136] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 7.136] (II) Initializing extension Generic Event Extension
[ 7.136] (II) Initializing extension SHAPE
[ 7.136] (II) Initializing extension MIT-SHM
[ 7.136] (II) Initializing extension XInputExtension
[ 7.136] (II) Initializing extension XTEST
[ 7.136] (II) Initializing extension BIG-REQUESTS
[ 7.136] (II) Initializing extension SYNC
[ 7.136] (II) Initializing extension XKEYBOARD
[ 7.136] (II) Initializing extension XC-MISC
[ 7.136] (II) Initializing extension SECURITY
[ 7.136] (II) Initializing extension XFIXES
[ 7.136] (II) Initializing extension RENDER
[ 7.137] (II) Initializing extension RANDR
[ 7.137] (II) Initializing extension COMPOSITE
[ 7.137] (II) Initializing extension DAMAGE
[ 7.137] (II) Initializing extension MIT-SCREEN-SAVER
[ 7.137] (II) Initializing extension DOUBLE-BUFFER
[ 7.137] (II) Initializing extension RECORD
[ 7.137] (II) Initializing extension DPMS
[ 7.137] (II) Initializing extension Present
[ 7.137] (II) Initializing extension DRI3
[ 7.137] (II) Initializing extension X-Resource
[ 7.137] (II) Initializing extension XVideo
[ 7.137] (II) Initializing extension XVideo-MotionCompensation
[ 7.137] (II) Initializing extension GLX
[ 7.137] (II) Initializing extension GLX
[ 7.137] (II) Indirect GLX disabled.
[ 7.137] (II) GLX: Another vendor is already registered for screen 0
[ 7.138] (II) Initializing extension XFree86-VidModeExtension
[ 7.138] (II) Initializing extension XFree86-DGA
[ 7.138] (II) Initializing extension XFree86-DRI
[ 7.138] (II) Initializing extension DRI2
[ 7.138] (II) Initializing extension NV-GLX
[ 7.138] (II) Initializing extension NV-CONTROL
[ 7.138] (II) Initializing extension XINERAMA
[ 7.200] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.200] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 7.200] (II) LoadModule: "libinput"
[ 7.200] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 7.206] (II) Module libinput: vendor="X.Org Foundation"
[ 7.206] compiled for 1.21.1.13, module version = 1.4.0
[ 7.206] Module class: X.Org XInput Driver
[ 7.206] ABI class: X.Org XInput driver, version 24.4
[ 7.206] (II) Using input driver 'libinput' for 'Power Button'
[ 7.206] (**) Power Button: always reports core events
[ 7.206] (**) Option "Device" "/dev/input/event1"
[ 7.211] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 7.211] (II) event1 - Power Button: device is a keyboard
[ 7.211] (II) event1 - Power Button: device removed
[ 7.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 7.246] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.247] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 7.247] (II) event1 - Power Button: device is a keyboard
[ 7.247] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7.248] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 7.248] (II) Using input driver 'libinput' for 'Power Button'
[ 7.248] (**) Power Button: always reports core events
[ 7.248] (**) Option "Device" "/dev/input/event0"
[ 7.248] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 7.248] (II) event0 - Power Button: device is a keyboard
[ 7.248] (II) event0 - Power Button: device removed
[ 7.273] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 7.273] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 7.274] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 7.274] (II) event0 - Power Button: device is a keyboard
[ 7.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event3)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.276] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/event10)
[ 7.276] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput pointer catchall"
[ 7.276] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[ 7.276] (**) Razer Razer Basilisk Essential: always reports core events
[ 7.276] (**) Option "Device" "/dev/input/event10"
[ 7.331] (II) event10 - Razer Razer Basilisk Essential: is tagged by udev as: Mouse
[ 7.331] (II) event10 - Razer Razer Basilisk Essential: device is a pointer
[ 7.331] (II) event10 - Razer Razer Basilisk Essential: device removed
[ 7.383] (II) libinput: Razer Razer Basilisk Essential: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.383] (II) libinput: Razer Razer Basilisk Essential: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.383] (II) libinput: Razer Razer Basilisk Essential: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.383] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:1532:0065.0001/input/input11/event10"
[ 7.383] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: MOUSE, id 8)
[ 7.383] (**) Option "AccelerationScheme" "none"
[ 7.383] (**) Razer Razer Basilisk Essential: (accel) selected scheme none/0
[ 7.383] (**) Razer Razer Basilisk Essential: (accel) acceleration factor: 2.000
[ 7.383] (**) Razer Razer Basilisk Essential: (accel) acceleration threshold: 4
[ 7.441] (II) event10 - Razer Razer Basilisk Essential: is tagged by udev as: Mouse
[ 7.441] (II) event10 - Razer Razer Basilisk Essential: device is a pointer
[ 7.441] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/mouse1)
[ 7.441] (II) No input driver specified, ignoring this device.
[ 7.441] (II) This device may have been added with another device file.
[ 7.442] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/event13)
[ 7.442] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput keyboard catchall"
[ 7.442] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[ 7.442] (**) Razer Razer Basilisk Essential: always reports core events
[ 7.442] (**) Option "Device" "/dev/input/event13"
[ 7.443] (II) event13 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[ 7.443] (II) event13 - Razer Razer Basilisk Essential: device is a keyboard
[ 7.443] (II) event13 - Razer Razer Basilisk Essential: device removed
[ 7.486] (II) libinput: Razer Razer Basilisk Essential: needs a virtual subdevice
[ 7.486] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:1532:0065.0002/input/input21/event13"
[ 7.486] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: MOUSE, id 9)
[ 7.486] (**) Option "AccelerationScheme" "none"
[ 7.486] (**) Razer Razer Basilisk Essential: (accel) selected scheme none/0
[ 7.486] (**) Razer Razer Basilisk Essential: (accel) acceleration factor: 2.000
[ 7.486] (**) Razer Razer Basilisk Essential: (accel) acceleration threshold: 4
[ 7.487] (II) event13 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[ 7.488] (II) event13 - Razer Razer Basilisk Essential: device is a keyboard
[ 7.488] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/event16)
[ 7.488] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput keyboard catchall"
[ 7.488] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[ 7.488] (**) Razer Razer Basilisk Essential: always reports core events
[ 7.488] (**) Option "Device" "/dev/input/event16"
[ 7.489] (II) event16 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[ 7.489] (II) event16 - Razer Razer Basilisk Essential: device is a keyboard
[ 7.489] (II) event16 - Razer Razer Basilisk Essential: device removed
[ 7.513] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:1532:0065.0003/input/input22/event16"
[ 7.513] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: KEYBOARD, id 10)
[ 7.514] (II) event16 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[ 7.514] (II) event16 - Razer Razer Basilisk Essential: device is a keyboard
[ 7.515] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/event6)
[ 7.515] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 7.515] (II) Using input driver 'libinput' for 'Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard'
[ 7.515] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: always reports core events
[ 7.515] (**) Option "Device" "/dev/input/event6"
[ 7.516] (II) event6 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[ 7.516] (II) event6 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a keyboard
[ 7.516] (II) event6 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device removed
[ 7.540] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: needs a virtual subdevice
[ 7.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:1B1C:1B89.0004/input/input6/event6"
[ 7.540] (II) XINPUT: Adding extended input device "Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard" (type: MOUSE, id 11)
[ 7.540] (**) Option "AccelerationScheme" "none"
[ 7.540] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) selected scheme none/0
[ 7.540] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration factor: 2.000
[ 7.540] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration threshold: 4
[ 7.541] (II) event6 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[ 7.541] (II) event6 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a keyboard
[ 7.542] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/event7)
[ 7.542] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Applying InputClass "libinput pointer catchall"
[ 7.542] (II) Using input driver 'libinput' for 'Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard'
[ 7.542] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: always reports core events
[ 7.542] (**) Option "Device" "/dev/input/event7"
[ 7.597] (II) event7 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Mouse
[ 7.597] (II) event7 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a pointer
[ 7.597] (II) event7 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device removed
[ 7.650] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.650] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.650] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 7.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.3/0003:1B1C:1B89.0007/input/input7/event7"
[ 7.650] (II) XINPUT: Adding extended input device "Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard" (type: MOUSE, id 12)
[ 7.650] (**) Option "AccelerationScheme" "none"
[ 7.650] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) selected scheme none/0
[ 7.650] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration factor: 2.000
[ 7.650] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration threshold: 4
[ 7.707] (II) event7 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Mouse
[ 7.707] (II) event7 - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a pointer
[ 7.708] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/js0)
[ 7.708] (II) No input driver specified, ignoring this device.
[ 7.708] (II) This device may have been added with another device file.
[ 7.708] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/mouse0)
[ 7.708] (II) No input driver specified, ignoring this device.
[ 7.708] (II) This device may have been added with another device file.
[ 7.709] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[ 7.709] (II) No input driver specified, ignoring this device.
[ 7.709] (II) This device may have been added with another device file.
[ 7.709] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 7.709] (II) No input driver specified, ignoring this device.
[ 7.709] (II) This device may have been added with another device file.
[ 7.709] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event5)
[ 7.709] (II) No input driver specified, ignoring this device.
[ 7.709] (II) This device may have been added with another device file.
[ 7.709] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14)
[ 7.709] (II) No input driver specified, ignoring this device.
[ 7.710] (II) This device may have been added with another device file.
[ 7.710] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[ 7.710] (II) No input driver specified, ignoring this device.
[ 7.710] (II) This device may have been added with another device file.
[ 7.710] (II) config/udev: Adding input device SteelSeries Arctis Nova 3 (/dev/input/event8)
[ 7.710] (**) SteelSeries Arctis Nova 3: Applying InputClass "libinput keyboard catchall"
[ 7.710] (II) Using input driver 'libinput' for 'SteelSeries Arctis Nova 3'
[ 7.710] (**) SteelSeries Arctis Nova 3: always reports core events
[ 7.710] (**) Option "Device" "/dev/input/event8"
[ 7.711] (II) event8 - SteelSeries Arctis Nova 3: is tagged by udev as: Keyboard
[ 7.711] (II) event8 - SteelSeries Arctis Nova 3: device is a keyboard
[ 7.711] (II) event8 - SteelSeries Arctis Nova 3: device removed
[ 7.753] (II) libinput: SteelSeries Arctis Nova 3: needs a virtual subdevice
[ 7.753] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.3/0003:1038:12EC.0008/input/input8/event8"
[ 7.753] (II) XINPUT: Adding extended input device "SteelSeries Arctis Nova 3" (type: MOUSE, id 13)
[ 7.753] (**) Option "AccelerationScheme" "none"
[ 7.753] (**) SteelSeries Arctis Nova 3: (accel) selected scheme none/0
[ 7.753] (**) SteelSeries Arctis Nova 3: (accel) acceleration factor: 2.000
[ 7.753] (**) SteelSeries Arctis Nova 3: (accel) acceleration threshold: 4
[ 7.754] (II) event8 - SteelSeries Arctis Nova 3: is tagged by udev as: Keyboard
[ 7.754] (II) event8 - SteelSeries Arctis Nova 3: device is a keyboard
[ 7.755] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
[ 7.755] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 7.755] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 7.755] (**) Eee PC WMI hotkeys: always reports core events
[ 7.755] (**) Option "Device" "/dev/input/event2"
[ 7.755] (II) event2 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 7.755] (II) event2 - Eee PC WMI hotkeys: device is a keyboard
[ 7.755] (II) event2 - Eee PC WMI hotkeys: device removed
[ 7.806] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event2"
[ 7.806] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[ 7.807] (II) event2 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 7.807] (II) event2 - Eee PC WMI hotkeys: device is a keyboard
[ 7.807] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 7.807] (II) No input driver specified, ignoring this device.
[ 7.807] (II) This device may have been added with another device file.
[ 7.812] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput keyboard catchall"
[ 7.812] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[ 7.812] (**) Razer Razer Basilisk Essential: always reports core events
[ 7.812] (**) Option "Device" "/dev/input/event13"
[ 7.812] (II) libinput: Razer Razer Basilisk Essential: is a virtual subdevice
[ 7.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:1532:0065.0002/input/input21/event13"
[ 7.812] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: KEYBOARD, id 15)
[ 7.813] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 7.813] (II) Using input driver 'libinput' for 'Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard'
[ 7.813] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: always reports core events
[ 7.813] (**) Option "Device" "/dev/input/event6"
[ 7.813] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is a virtual subdevice
[ 7.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:1B1C:1B89.0004/input/input6/event6"
[ 7.813] (II) XINPUT: Adding extended input device "Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard" (type: KEYBOARD, id 16)
[ 7.813] (**) SteelSeries Arctis Nova 3: Applying InputClass "libinput keyboard catchall"
[ 7.813] (II) Using input driver 'libinput' for 'SteelSeries Arctis Nova 3'
[ 7.813] (**) SteelSeries Arctis Nova 3: always reports core events
[ 7.813] (**) Option "Device" "/dev/input/event8"
[ 7.813] (II) libinput: SteelSeries Arctis Nova 3: is a virtual subdevice
[ 7.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.3/0003:1038:12EC.0008/input/input8/event8"
[ 7.813] (II) XINPUT: Adding extended input device "SteelSeries Arctis Nova 3" (type: KEYBOARD, id 17)
[ 17.029] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[ 17.029] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[ 17.029] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 600.0 MHz maximum pixel clock
[ 17.029] (--) NVIDIA(GPU-0):
[ 17.029] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 17.029] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 17.029] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[ 17.029] (--) NVIDIA(GPU-0):
[ 17.029] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 17.029] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 17.029] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 17.029] (--) NVIDIA(GPU-0):
[ 17.075] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): connected
[ 17.075] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): Internal TMDS
[ 17.075] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): 600.0 MHz maximum pixel clock
[ 17.075] (--) NVIDIA(GPU-0):
[ 19.393] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[ 19.393] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[ 19.393] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 600.0 MHz maximum pixel clock
[ 19.393] (--) NVIDIA(GPU-0):
[ 19.393] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.393] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 19.393] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[ 19.393] (--) NVIDIA(GPU-0):
[ 19.394] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 19.394] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 19.394] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 19.394] (--) NVIDIA(GPU-0):
[ 19.438] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): connected
[ 19.438] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): Internal TMDS
[ 19.438] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): 600.0 MHz maximum pixel clock
[ 19.438] (--) NVIDIA(GPU-0): Last edited by m2rsh (2024-07-24 22:08:09)
Offline
#15 2024-07-25 06:43:45
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,717
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
The remark was meant for phunni, b/c nvida-open avoids at least the apparent 55yxx memory corruption issues of the binary driver and https://archlinux.org/packages/extra/x8 … idia-open/ is in the repos..
Using config file: "/etc/X11/xorg.conf"
generally get rid of that file, but the issue at hand might be in the DDX driver (ie nvidia-utils, not the kernel module) and then nvidaz-open can't help you either 
Offline
#16 2024-07-31 12:23:40
- phunni
- Member
- From: Bristol, UK
- Registered: 2003-08-13
- Posts: 787
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
seth wrote:
Is nvidia-open an option?
Probably, although I'm not sure it supports my old card - GTX 1070
Offline
#17 2024-07-31 14:03:09
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,717
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
That should be a Turing chip - which are supported by nvidia-open.
Offline
#18 2024-07-31 14:19:40
- phunni
- Member
- From: Bristol, UK
- Registered: 2003-08-13
- Posts: 787
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
seth wrote:
That should be a Turing chip - which are supported by nvidia-open.
Thanks - I'll give it a go then.
Offline
#19 2024-07-31 17:39:15
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 23,203
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
1070 should be Pascal and not supported, sadly...
Offline
#20 2024-07-31 19:29:58
- seth
- Member
- Registered: 2012-09-03
- Posts: 58,717
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
There's even https://en.wikipedia.org/wiki/GeForce_10_series - maybe should™ not have gone w/ the first google result… sorry
Offline
#21 2024-07-31 20:27:37
- phunni
- Member
- From: Bristol, UK
- Registered: 2003-08-13
- Posts: 787
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
Can confirm - is not supported.
Offline
#22 2024-08-03 13:06:57
- m2rsh
- Member
- Registered: 2024-07-04
- Posts: 4
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
NVIDIA is apparently working on it "Thank you everyone for sharing the details, I am able to replicate issue locally which will help us to debug it now. Shall update further once I have feedback from engineering team." this message is from like a day ago https://forums.developer.nvidia.com/t/b … /298311/21
Offline
#23 2024-08-03 13:13:27
- phunni
- Member
- From: Bristol, UK
- Registered: 2003-08-13
- Posts: 787
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
m2rsh wrote:
NVIDIA is apparently working on it "Thank you everyone for sharing the details, I am able to replicate issue locally which will help us to debug it now. Shall update further once I have feedback from engineering team." this message is from like a day ago https://forums.developer.nvidia.com/t/b … /298311/21
Excellent news - here's hoping it didn't take too long...
Offline
#24 2024-08-07 18:43:05
- phunni
- Member
- From: Bristol, UK
- Registered: 2003-08-13
- Posts: 787
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
Does anyone know how long these things can usually be expected to take? I'm trying to decide if I should just buy a new GPU - an AMD one this time. I can't really afford it and would have to go from an old, but (in it's day) high end to a relatively budget one. That said, I imagine most modern budget ones would outperform my dinosaur anyway.
If it's likely to be a question of weeks, then I'll probably just hang on, but waiting months would be very frustrating...
Offline
#25 2024-08-07 23:42:11
- Scimmia
- Fellow
- Registered: 2012-09-01
- Posts: 12,085
Re: NVidia 555 Display Issues with Dual Monitor on Gnome
The 560 drivers should be out soon, they're in their second beta. No idea if they've fixed this issue, though.
Offline