You are not logged in.

#1 2024-07-02 01:24:14

HenryJia
Member
Registered: 2013-11-30
Posts: 20

NVidia 555 Display Issues with Dual Monitor on Gnome

Updated my system earlier this morning and discovered some weird behaviour on Gnome

My system would recognise that the second display existed and was plugged in, but the moment the NVidia driver loaded it would cause one of the displays to go completely black

However, Gnome was still pretending that the second display is active and try to display stuff in it (despite the fact that it was completely black and not active). Nvidia settings also seems to show the display as active, even though it was black

I was able to fix this by downgrading to 550.90.07 drivers, as well as switching to the DKMS drivers.

For good measure, I also set nvidia_drm.modeset=1 in my kernel settings via /etc/default/grub

This seemed to restore everything back to normal functionality.

I am not completely certain on what caused this, since I am not using Wayland. I'm using Gnome on X11, and all the current issues I've seen here use Wayland. For example: https://bbs.archlinux.org/viewtopic.php?id=295937

My intuition was that my issue was caused by the fact that my system is a little oder and I still use DVI to HDMI on one of my displays: https://forums.developer.nvidia.com/t/b … een/298311

I'm putting this post here in case it helps anyone else experiencing the same problem

Last edited by HenryJia (2024-07-02 01:25:03)


Computational scientist and machine learning engineer

Offline

#2 2024-07-02 05:45:39

d.ALT
Member
Registered: 2019-05-10
Posts: 943

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

HenryJia wrote:

DVI to HDMI on one of my displays: https://forums.developer.nvidia.com/t/b … een/298311

I'm putting this post here in case it helps anyone else experiencing the same problem

Same for me (X11+Plasma).


<49,17,III,I>    Fama di loro il mondo esser non lassa;
<50,17,III,I>    misericordia e giustizia li sdegna:
<51,17,III,I>    non ragioniam di lor, ma guarda e passa.

Offline

#3 2024-07-03 18:54:53

ReD55
Member
Registered: 2022-07-14
Posts: 5

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

I am having the same issue on my triple Mointore Setup (X11 + bspwm)
DVI-D-0 only to be specific.
tty works on boot, but once nvidia + X11 is started. My main monitore stops working even after Xorg is killed.
Everything seems to be able to recognize them, but it is still black.

DVI-D-0 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 544mm x 303mm
   1920x1080     60.00*+  59.94    50.00  
   1280x720      59.94    50.00  
   1024x768      60.00  
   800x600       60.32  
   720x576       50.00  
   720x480       59.94  
   640x480       59.94    59.93  
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
   1920x1080     60.00*+  59.94    50.00    60.05    60.00    50.04  
   1680x1050     59.95  
   1280x1024     60.02  
   1280x960      60.00  
   1280x720      60.00    59.94    50.00  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32  
   720x576       50.00  
   720x480       59.94  
   640x480       59.94    59.93  
DP-0 connected 1920x1080+3840+0 (normal left inverted right x axis y axis) 510mm x 290mm
   1920x1080     60.00*+  59.94    50.00  
   1680x1050     59.95  
   1280x1024     60.02  
   1280x960      60.00  
   1280x720      60.00    59.94    50.00  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32  
   720x576       50.00  
   720x480       59.94  
   640x480       59.94    59.93  
DP-1 disconnected (normal left inverted right x axis y axis)
 
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[    23.438] Current Operating System: Linux workstation 6.9.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 28 Jun 2024 04:32:50 +0000 x86_64
[    23.438] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0fccba3b-05de-45c0-b4b3-6224803372ed rw loglevel=3 quiet
[    23.438]  
[    23.439] Current version of pixman: 0.43.4
[    23.439] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    23.439] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.439] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul  3 20:30:13 2024
[    23.448] (==) Using config file: "/etc/X11/xorg.conf"
[    23.448] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.448] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.450] (==) ServerLayout "X.org Configured"
[    23.450] (**) |-->Screen "Screen0" (0)
[    23.450] (**) |   |-->Monitor "Monitor0"
[    23.451] (**) |   |-->Device "Card0"
[    23.451] (**) |-->Input Device "Mouse0"
[    23.451] (**) |-->Input Device "Keyboard0"
[    23.451] (==) Automatically adding devices
[    23.451] (==) Automatically enabling devices
[    23.451] (==) Automatically adding GPU devices
[    23.451] (==) Automatically binding GPU devices
[    23.451] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.457] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    23.457] 	Entry deleted from font path.
[    23.460] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    23.460] 	Entry deleted from font path.
[    23.460] (**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    23.460] (**) ModulePath set to "/usr/lib/xorg/modules"
[    23.460] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    23.460] (WW) Disabling Mouse0
[    23.460] (WW) Disabling Keyboard0
[    23.460] (II) Module ABI versions:
[    23.460] 	X.Org ANSI C Emulation: 0.4
[    23.460] 	X.Org Video Driver: 25.2
[    23.460] 	X.Org XInput driver : 24.4
[    23.460] 	X.Org Server Extension : 10.0
[    23.461] (++) using VT number 1

[    23.461] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    23.462] (II) xfree86: Adding drm device (/dev/dri/card1)
[    23.462] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/drm/card1
[    23.463] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[    23.463] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.463] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:09:00.0/simple-framebuffer.0/drm/card0
[    23.463] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[    23.466] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    23.466] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    23.466] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[    23.469] (--) PCI:*(9@0:0:0) 10de:1c82:19da:1454 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    23.469] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    23.469] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    23.469] (II) LoadModule: "glx"
[    23.472] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.480] (II) Module glx: vendor="X.Org Foundation"
[    23.480] 	compiled for 1.21.1.11, module version = 1.0.0
[    23.480] 	ABI class: X.Org Server Extension, version 10.0
[    23.480] (II) LoadModule: "nvidia"
[    23.480] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    23.487] (II) Module nvidia: vendor="NVIDIA Corporation"
[    23.487] 	compiled for 1.6.99.901, module version = 1.0.0
[    23.487] 	Module class: X.Org Video Driver
[    23.488] (II) NVIDIA dlloader X Driver  555.58  Tue Jun 18 20:27:01 UTC 2024
[    23.488] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    23.488] (II) systemd-logind: releasing fd for 226:1
[    23.490] (II) Loading sub module "fb"
[    23.490] (II) LoadModule: "fb"
[    23.490] (II) Module "fb" already built-in
[    23.490] (II) Loading sub module "wfb"
[    23.490] (II) LoadModule: "wfb"
[    23.490] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    23.491] (II) Module wfb: vendor="X.Org Foundation"
[    23.491] 	compiled for 1.21.1.11, module version = 1.0.0
[    23.491] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    23.493] (II) systemd-logind: releasing fd for 226:0
[    23.493] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    23.493] (==) NVIDIA(0): RGB weight 888
[    23.493] (==) NVIDIA(0): Default visual is TrueColor
[    23.493] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    23.494] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    23.494] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    23.494] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    23.494] (**) NVIDIA(0): Enabling 2D acceleration
[    23.494] (II) Loading sub module "glxserver_nvidia"
[    23.494] (II) LoadModule: "glxserver_nvidia"
[    23.494] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    23.657] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    23.657] 	compiled for 1.6.99.901, module version = 1.0.0
[    23.657] 	Module class: X.Org Server Extension
[    23.657] (II) NVIDIA GLX Module  555.58  Tue Jun 18 20:30:47 UTC 2024
[    23.660] (II) NVIDIA: The X server supports PRIME Render Offload.
[    24.604] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[    24.604] (--) NVIDIA(0):     DFP-0 (boot)
[    24.604] (--) NVIDIA(0):     DFP-1
[    24.604] (--) NVIDIA(0):     DFP-2
[    24.604] (--) NVIDIA(0):     DFP-3
[    24.605] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1050 Ti (GP107-A) at PCI:9:0:0
[    24.605] (II) NVIDIA(0):     (GPU-0)
[    24.605] (--) NVIDIA(0): Memory: 4194304 kBytes
[    24.605] (--) NVIDIA(0): VideoBIOS: 86.07.59.00.11
[    24.605] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    24.650] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[    24.650] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[    24.650] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[    24.650] (--) NVIDIA(GPU-0): 
[    24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[    24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[    24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[    24.694] (--) NVIDIA(GPU-0): 
[    24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[    24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[    24.694] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[    24.694] (--) NVIDIA(GPU-0): 
[    24.697] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    24.697] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    24.697] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    24.697] (--) NVIDIA(GPU-0): 
[    24.705] (==) NVIDIA(0): 
[    24.705] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    24.705] (==) NVIDIA(0):     will be used as the requested mode.
[    24.705] (==) NVIDIA(0): 
[    24.705] (II) NVIDIA(0): Validated MetaModes:
[    24.705] (II) NVIDIA(0):    
[    24.705] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select,DFP-2:nvidia-auto-select"
[    24.705] (II) NVIDIA(0): Virtual screen size determined to be 5760 x 1080
[    24.709] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
[    24.709] (--) NVIDIA(0):     option
[    24.709] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[    24.709] (==) NVIDIA(G0): RGB weight 888
[    24.709] (==) NVIDIA(G0): Default visual is TrueColor
[    24.709] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[    24.709] (**) NVIDIA(G0): Enabling 2D acceleration
[    24.709] (II) NVIDIA: The X server supports PRIME Render Offload.
[    24.709] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[    24.709] (EE) NVIDIA(G0): Failing initialization of X screen
[    24.709] (II) UnloadModule: "nvidia"
[    24.709] (II) UnloadSubModule: "wfb"
[    24.709] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[    24.709] (II) NVIDIA(GPU-1): Deleting GPU-1
[    24.709] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[    24.710] (II) NVIDIA:     access.
[    24.712] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    24.712] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    24.712] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    24.712] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    24.712] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    24.712] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    24.712] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    24.712] (II) NVIDIA(0):     Config Options in the README.
[    24.732] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select,DFP-2:nvidia-auto-select"
[    24.882] (==) NVIDIA(0): Disabling shared memory pixmaps
[    24.882] (==) NVIDIA(0): Backing store enabled
[    24.882] (==) NVIDIA(0): Silken mouse enabled
[    24.883] (==) NVIDIA(0): DPMS enabled
[    24.883] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    24.883] (II) Loading sub module "dri2"
[    24.883] (II) LoadModule: "dri2"
[    24.883] (II) Module "dri2" already built-in
[    24.883] (II) NVIDIA(0): [DRI2] Setup complete
[    24.883] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    24.883] (II) Initializing extension Generic Event Extension
[    24.883] (II) Initializing extension SHAPE
[    24.883] (II) Initializing extension MIT-SHM
[    24.883] (II) Initializing extension XInputExtension
[    24.883] (II) Initializing extension XTEST
[    24.883] (II) Initializing extension BIG-REQUESTS
[    24.883] (II) Initializing extension SYNC
[    24.883] (II) Initializing extension XKEYBOARD
[    24.883] (II) Initializing extension XC-MISC
[    24.883] (II) Initializing extension SECURITY
[    24.884] (II) Initializing extension XFIXES
[    24.884] (II) Initializing extension RENDER
[    24.884] (II) Initializing extension RANDR
[    24.884] (II) Initializing extension COMPOSITE
[    24.884] (II) Initializing extension DAMAGE
[    24.884] (II) Initializing extension MIT-SCREEN-SAVER
[    24.884] (II) Initializing extension DOUBLE-BUFFER
[    24.884] (II) Initializing extension RECORD
[    24.884] (II) Initializing extension DPMS
[    24.884] (II) Initializing extension Present
[    24.884] (II) Initializing extension DRI3
[    24.884] (II) Initializing extension X-Resource
[    24.884] (II) Initializing extension XVideo
[    24.884] (II) Initializing extension XVideo-MotionCompensation
[    24.884] (II) Initializing extension GLX
[    24.884] (II) Initializing extension GLX
[    24.884] (II) Indirect GLX disabled.
[    24.885] (II) GLX: Another vendor is already registered for screen 0
[    24.885] (II) Initializing extension XFree86-VidModeExtension
[    24.885] (II) Initializing extension XFree86-DGA
[    24.885] (II) Initializing extension XFree86-DRI
[    24.885] (II) Initializing extension DRI2
[    24.885] (II) Initializing extension NV-GLX
[    24.885] (II) Initializing extension NV-CONTROL
[    24.885] (II) Initializing extension XINERAMA
[    25.206] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    25.207] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.207] (**) Power Button: Applying InputClass "system-keyboard"
[    25.207] (II) LoadModule: "libinput"
[    25.207] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    25.212] (II) Module libinput: vendor="X.Org Foundation"
[    25.212] 	compiled for 1.21.1.8, module version = 1.4.0
[    25.212] 	Module class: X.Org XInput Driver
[    25.212] 	ABI class: X.Org XInput driver, version 24.4
[    25.212] (II) Using input driver 'libinput' for 'Power Button'
[    25.213] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[    25.213] (**) Power Button: always reports core events
[    25.213] (**) Option "Device" "/dev/input/event1"
[    25.219] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    25.219] (II) event1  - Power Button: device is a keyboard
[    25.219] (II) event1  - Power Button: device removed
[    25.219] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    25.219] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.219] (**) Option "xkb_model" "pc105"
[    25.219] (**) Option "xkb_layout" "de"
[    25.219] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.238] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    25.238] (II) event1  - Power Button: device is a keyboard
[    25.239] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    25.239] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.239] (**) Power Button: Applying InputClass "system-keyboard"
[    25.239] (II) Using input driver 'libinput' for 'Power Button'
[    25.240] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 44 paused 0
[    25.240] (**) Power Button: always reports core events
[    25.240] (**) Option "Device" "/dev/input/event0"
[    25.241] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    25.241] (II) event0  - Power Button: device is a keyboard
[    25.241] (II) event0  - Power Button: device removed
[    25.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    25.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    25.241] (**) Option "xkb_model" "pc105"
[    25.241] (**) Option "xkb_layout" "de"
[    25.241] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.242] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    25.242] (II) event0  - Power Button: device is a keyboard
[    25.242] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event4)
[    25.242] (II) No input driver specified, ignoring this device.
[    25.242] (II) This device may have been added with another device file.
[    25.243] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event5)
[    25.243] (II) No input driver specified, ignoring this device.
[    25.243] (II) This device may have been added with another device file.
[    25.243] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[    25.243] (II) No input driver specified, ignoring this device.
[    25.243] (II) This device may have been added with another device file.
[    25.244] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[    25.244] (II) No input driver specified, ignoring this device.
[    25.244] (II) This device may have been added with another device file.
[    25.245] (II) config/udev: Adding input device Kingston HyperX Quadcast Consumer Control (/dev/input/event18)
[    25.245] (**) Kingston HyperX Quadcast Consumer Control: Applying InputClass "libinput keyboard catchall"
[    25.245] (**) Kingston HyperX Quadcast Consumer Control: Applying InputClass "system-keyboard"
[    25.245] (II) Using input driver 'libinput' for 'Kingston HyperX Quadcast Consumer Control'
[    25.246] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 45 paused 0
[    25.246] (**) Kingston HyperX Quadcast Consumer Control: always reports core events
[    25.246] (**) Option "Device" "/dev/input/event18"
[    25.248] (II) event18 - Kingston HyperX Quadcast Consumer Control: is tagged by udev as: Keyboard
[    25.248] (II) event18 - Kingston HyperX Quadcast Consumer Control: device is a keyboard
[    25.248] (II) event18 - Kingston HyperX Quadcast Consumer Control: device removed
[    25.248] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.1/3-3.1.1.4.1:1.3/0003:0951:16DF.0008/input/input18/event18"
[    25.248] (II) XINPUT: Adding extended input device "Kingston HyperX Quadcast Consumer Control" (type: KEYBOARD, id 8)
[    25.248] (**) Option "xkb_model" "pc105"
[    25.248] (**) Option "xkb_layout" "de"
[    25.248] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.250] (II) event18 - Kingston HyperX Quadcast Consumer Control: is tagged by udev as: Keyboard
[    25.250] (II) event18 - Kingston HyperX Quadcast Consumer Control: device is a keyboard
[    25.251] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event19)
[    25.251] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[    25.251] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502'
[    25.307] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 46 paused 0
[    25.307] (**) Logitech Gaming Mouse G502: always reports core events
[    25.307] (**) Option "Device" "/dev/input/event19"
[    25.309] (II) event19 - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[    25.309] (II) event19 - Logitech Gaming Mouse G502: device set to 2400 DPI
[    25.309] (II) event19 - Logitech Gaming Mouse G502: device is a pointer
[    25.309] (II) event19 - Logitech Gaming Mouse G502: device removed
[    25.309] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.309] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.309] (II) libinput: Logitech Gaming Mouse G502: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.309] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.3/3-3.1.1.4.3:1.0/0003:046D:C332.0009/input/input20/event19"
[    25.309] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 9)
[    25.310] (**) Option "AccelerationScheme" "none"
[    25.310] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0
[    25.310] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[    25.310] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[    25.311] (II) event19 - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[    25.311] (II) event19 - Logitech Gaming Mouse G502: device set to 2400 DPI
[    25.312] (II) event19 - Logitech Gaming Mouse G502: device is a pointer
[    25.313] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse3)
[    25.313] (II) No input driver specified, ignoring this device.
[    25.313] (II) This device may have been added with another device file.
[    25.314] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event20)
[    25.314] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[    25.314] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard"
[    25.314] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[    25.315] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 47 paused 0
[    25.315] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[    25.315] (**) Option "Device" "/dev/input/event20"
[    25.317] (II) event20 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[    25.317] (II) event20 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[    25.317] (II) event20 - Logitech Gaming Mouse G502 Keyboard: device removed
[    25.317] (II) libinput: Logitech Gaming Mouse G502 Keyboard: needs a virtual subdevice
[    25.317] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.3/3-3.1.1.4.3:1.1/0003:046D:C332.000A/input/input21/event20"
[    25.317] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: MOUSE, id 10)
[    25.317] (**) Option "AccelerationScheme" "none"
[    25.317] (**) Logitech Gaming Mouse G502 Keyboard: (accel) selected scheme none/0
[    25.317] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration factor: 2.000
[    25.317] (**) Logitech Gaming Mouse G502 Keyboard: (accel) acceleration threshold: 4
[    25.319] (II) event20 - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[    25.319] (II) event20 - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[    25.320] (II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event15)
[    25.320] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall"
[    25.320] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "system-keyboard"
[    25.320] (II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID'
[    25.321] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 48 paused 0
[    25.321] (**) Yubico YubiKey OTP+FIDO+CCID: always reports core events
[    25.321] (**) Option "Device" "/dev/input/event15"
[    25.323] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[    25.323] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[    25.323] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: device removed
[    25.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.4/3-3.1.1.4.4:1.0/0003:1050:0407.000B/input/input24/event15"
[    25.323] (II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 11)
[    25.323] (**) Option "xkb_model" "pc105"
[    25.323] (**) Option "xkb_layout" "de"
[    25.323] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.325] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard
[    25.325] (II) event15 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard
[    25.326] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event3)
[    25.326] (**) HID 0c45:7403: Applying InputClass "libinput keyboard catchall"
[    25.326] (**) HID 0c45:7403: Applying InputClass "system-keyboard"
[    25.326] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[    25.327] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 49 paused 0
[    25.327] (**) HID 0c45:7403: always reports core events
[    25.327] (**) Option "Device" "/dev/input/event3"
[    25.329] (II) event3  - HID 0c45:7403: is tagged by udev as: Keyboard
[    25.329] (II) event3  - HID 0c45:7403: device is a keyboard
[    25.329] (II) event3  - HID 0c45:7403: device removed
[    25.329] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.2/3-3.2:1.0/0003:0C45:7403.0001/input/input3/event3"
[    25.329] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: KEYBOARD, id 12)
[    25.329] (**) Option "xkb_model" "pc105"
[    25.329] (**) Option "xkb_layout" "de"
[    25.329] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.331] (II) event3  - HID 0c45:7403: is tagged by udev as: Keyboard
[    25.331] (II) event3  - HID 0c45:7403: device is a keyboard
[    25.332] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event9)
[    25.332] (**) HID 0c45:7403: Applying InputClass "libinput pointer catchall"
[    25.332] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[    25.387] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 50 paused 0
[    25.387] (**) HID 0c45:7403: always reports core events
[    25.387] (**) Option "Device" "/dev/input/event9"
[    25.389] (II) event9  - HID 0c45:7403: is tagged by udev as: Mouse
[    25.389] (II) event9  - HID 0c45:7403: device is a pointer
[    25.389] (II) event9  - HID 0c45:7403: device removed
[    25.389] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.389] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.389] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.389] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.2/3-3.2:1.1/0003:0C45:7403.0002/input/input13/event9"
[    25.389] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: MOUSE, id 13)
[    25.389] (**) Option "AccelerationScheme" "none"
[    25.389] (**) HID 0c45:7403: (accel) selected scheme none/0
[    25.389] (**) HID 0c45:7403: (accel) acceleration factor: 2.000
[    25.389] (**) HID 0c45:7403: (accel) acceleration threshold: 4
[    25.390] (II) event9  - HID 0c45:7403: is tagged by udev as: Mouse
[    25.391] (II) event9  - HID 0c45:7403: device is a pointer
[    25.391] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/mouse0)
[    25.391] (II) No input driver specified, ignoring this device.
[    25.391] (II) This device may have been added with another device file.
[    25.392] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event14)
[    25.392] (**) HID 0c45:7403: Applying InputClass "libinput keyboard catchall"
[    25.392] (**) HID 0c45:7403: Applying InputClass "system-keyboard"
[    25.392] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[    25.393] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 51 paused 0
[    25.393] (**) HID 0c45:7403: always reports core events
[    25.393] (**) Option "Device" "/dev/input/event14"
[    25.395] (II) event14 - HID 0c45:7403: is tagged by udev as: Keyboard
[    25.395] (II) event14 - HID 0c45:7403: device is a keyboard
[    25.395] (II) event14 - HID 0c45:7403: device removed
[    25.395] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.3/3-3.3:1.0/0003:0C45:7403.0003/input/input14/event14"
[    25.395] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: KEYBOARD, id 14)
[    25.395] (**) Option "xkb_model" "pc105"
[    25.395] (**) Option "xkb_layout" "de"
[    25.395] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.397] (II) event14 - HID 0c45:7403: is tagged by udev as: Keyboard
[    25.397] (II) event14 - HID 0c45:7403: device is a keyboard
[    25.398] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/event16)
[    25.398] (**) HID 0c45:7403: Applying InputClass "libinput pointer catchall"
[    25.398] (II) Using input driver 'libinput' for 'HID 0c45:7403'
[    25.454] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 52 paused 0
[    25.454] (**) HID 0c45:7403: always reports core events
[    25.454] (**) Option "Device" "/dev/input/event16"
[    25.455] (II) event16 - HID 0c45:7403: is tagged by udev as: Mouse
[    25.455] (II) event16 - HID 0c45:7403: device is a pointer
[    25.456] (II) event16 - HID 0c45:7403: device removed
[    25.456] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.456] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.456] (II) libinput: HID 0c45:7403: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.3/3-3.3:1.1/0003:0C45:7403.0004/input/input17/event16"
[    25.456] (II) XINPUT: Adding extended input device "HID 0c45:7403" (type: MOUSE, id 15)
[    25.456] (**) Option "AccelerationScheme" "none"
[    25.456] (**) HID 0c45:7403: (accel) selected scheme none/0
[    25.456] (**) HID 0c45:7403: (accel) acceleration factor: 2.000
[    25.456] (**) HID 0c45:7403: (accel) acceleration threshold: 4
[    25.457] (II) event16 - HID 0c45:7403: is tagged by udev as: Mouse
[    25.457] (II) event16 - HID 0c45:7403: device is a pointer
[    25.458] (II) config/udev: Adding input device HID 0c45:7403 (/dev/input/mouse1)
[    25.458] (II) No input driver specified, ignoring this device.
[    25.458] (II) This device may have been added with another device file.
[    25.458] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event11)
[    25.458] (II) No input driver specified, ignoring this device.
[    25.458] (II) This device may have been added with another device file.
[    25.459] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event12)
[    25.459] (II) No input driver specified, ignoring this device.
[    25.459] (II) This device may have been added with another device file.
[    25.459] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event13)
[    25.459] (II) No input driver specified, ignoring this device.
[    25.459] (II) This device may have been added with another device file.
[    25.460] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event6)
[    25.460] (II) No input driver specified, ignoring this device.
[    25.460] (II) This device may have been added with another device file.
[    25.460] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event7)
[    25.460] (II) No input driver specified, ignoring this device.
[    25.460] (II) This device may have been added with another device file.
[    25.460] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    25.460] (II) No input driver specified, ignoring this device.
[    25.460] (II) This device may have been added with another device file.
[    25.463] (II) config/udev: Adding input device ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB (/dev/input/event17)
[    25.463] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: Applying InputClass "libinput keyboard catchall"
[    25.463] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: Applying InputClass "system-keyboard"
[    25.463] (II) Using input driver 'libinput' for 'ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB'
[    25.464] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 53 paused 0
[    25.464] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: always reports core events
[    25.464] (**) Option "Device" "/dev/input/event17"
[    25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: is tagged by udev as: Keyboard
[    25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: device is a keyboard
[    25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: device removed
[    25.465] (**) Option "config_info" "udev:/sys/devices/virtual/input/input25/event17"
[    25.465] (II) XINPUT: Adding extended input device "ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB" (type: KEYBOARD, id 16)
[    25.465] (**) Option "xkb_model" "pc105"
[    25.465] (**) Option "xkb_layout" "de"
[    25.465] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: is tagged by udev as: Keyboard
[    25.465] (II) event17 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vKB: device is a keyboard
[    25.466] (II) config/udev: Adding input device ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM (/dev/input/event21)
[    25.466] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Applying InputClass "libinput pointer catchall"
[    25.466] (II) Using input driver 'libinput' for 'ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM'
[    25.467] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 54 paused 0
[    25.467] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: always reports core events
[    25.467] (**) Option "Device" "/dev/input/event21"
[    25.467] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: is tagged by udev as: Mouse
[    25.467] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: device is a pointer
[    25.468] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: device removed
[    25.468] (II) libinput: ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.468] (II) libinput: ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.468] (II) libinput: ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: Step value 0 was provided, libinput Fallback acceleration function is used.
[    25.468] (**) Option "config_info" "udev:/sys/devices/virtual/input/input26/event21"
[    25.468] (II) XINPUT: Adding extended input device "ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM" (type: MOUSE, id 17)
[    25.468] (**) Option "AccelerationScheme" "none"
[    25.468] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: (accel) selected scheme none/0
[    25.468] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: (accel) acceleration factor: 2.000
[    25.468] (**) ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: (accel) acceleration threshold: 4
[    25.468] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: is tagged by udev as: Mouse
[    25.468] (II) event21 - ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM: device is a pointer
[    25.469] (II) config/udev: Adding input device ckb1: CORSAIR K100 RGB Optical-Mechanical Gaming Keyboard vM (/dev/input/mouse2)
[    25.469] (II) No input driver specified, ignoring this device.
[    25.469] (II) This device may have been added with another device file.
[    25.473] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[    25.473] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "system-keyboard"
[    25.473] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[    25.473] (II) systemd-logind: returning pre-existing fd for /dev/input/event20 13:84
[    25.473] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[    25.473] (**) Option "Device" "/dev/input/event20"
[    25.473] (II) libinput: Logitech Gaming Mouse G502 Keyboard: is a virtual subdevice
[    25.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb3/3-3/3-3.1/3-3.1.1/3-3.1.1.4/3-3.1.1.4.3/3-3.1.1.4.3:1.1/0003:046D:C332.000A/input/input21/event20"
[    25.473] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 18)
[    25.473] (**) Option "xkb_model" "pc105"
[    25.473] (**) Option "xkb_layout" "de"
[    25.473] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.473] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[    25.473] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[    25.473] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[    25.473] (--) NVIDIA(GPU-0): 
[    25.710] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DP-0: nvidia-auto-select @1920x1080 +3840+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[    25.979] (II) NVIDIA(0): Setting mode "DVI-D-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DP-0: nvidia-auto-select @1920x1080 +3840+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[    26.295] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[    26.295] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[    26.295] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[    26.295] (--) NVIDIA(GPU-0): 
[    26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[    26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[    26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[    26.339] (--) NVIDIA(GPU-0): 
[    26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[    26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[    26.339] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[    26.339] (--) NVIDIA(GPU-0): 
[    26.341] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    26.341] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    26.341] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    26.341] (--) NVIDIA(GPU-0): 
[   185.226] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[   185.226] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[   185.226] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[   185.226] (--) NVIDIA(GPU-0): 
[   185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[   185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[   185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[   185.270] (--) NVIDIA(GPU-0): 
[   185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[   185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[   185.270] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[   185.270] (--) NVIDIA(GPU-0): 
[   185.272] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   185.272] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   185.272] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   185.272] (--) NVIDIA(GPU-0): 
[   185.320] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[   185.320] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[   185.320] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[   185.320] (--) NVIDIA(GPU-0): 
[   185.364] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[   185.364] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[   185.364] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[   185.364] (--) NVIDIA(GPU-0): 
[   185.365] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[   185.365] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[   185.365] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[   185.365] (--) NVIDIA(GPU-0): 
[   185.367] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   185.367] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   185.367] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   185.367] (--) NVIDIA(GPU-0): 
[   635.152] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): connected
[   635.152] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): Internal TMDS
[   635.152] (--) NVIDIA(GPU-0): Asustek Computer Inc ROG PG258Q (DFP-0): 600.0 MHz maximum pixel clock
[   635.152] (--) NVIDIA(GPU-0): 
[   635.195] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): connected
[   635.195] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): Internal TMDS
[   635.195] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-1): 600.0 MHz maximum pixel clock
[   635.195] (--) NVIDIA(GPU-0): 
[   635.196] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): connected
[   635.196] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): Internal DisplayPort
[   635.196] (--) NVIDIA(GPU-0): LG Electronics IPS235 (DFP-2): 1440.0 MHz maximum pixel clock
[   635.196] (--) NVIDIA(GPU-0): 
[   635.198] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   635.198] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   635.198] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   635.198] (--) NVIDIA(GPU-0): 

Offline

#4 2024-07-03 20:08:06

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,072

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

DVI is on the record to be broken in 555, other connector methods seem to work fine: https://bbs.archlinux.org/viewtopic.php?id=297296

Offline

#5 2024-07-06 16:58:35

ReD55
Member
Registered: 2022-07-14
Posts: 5

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

So the fix that worked for me was downgrading to nvidia-dkms 550
and using linux-lts with linux-lts-headers

sudo pacman -Rns nvidia nvidia-utils nvidia-settings 
sudo downgrade nvidia-dkms
sudo downgrade nvidia-utils
sudo downgrade nvidia-settings

Offline

#6 2024-07-09 10:04:29

proofx
Member
Registered: 2024-07-09
Posts: 2

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

ReD55 wrote:

So the fix that worked for me was downgrading to nvidia-dkms 550
and using linux-lts with linux-lts-headers

sudo pacman -Rns nvidia nvidia-utils nvidia-settings 
sudo downgrade nvidia-dkms
sudo downgrade nvidia-utils
sudo downgrade nvidia-settings

downgraded nvidia stuff to 550 and installed linux and headers for 6.6, still doesn't work. any other ideas?

Offline

#7 2024-07-09 13:27:19

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,072

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

That should and does work for the majority of people, but "doesn't work" is not an error message. What exactly did you downgrade how? What output do you get from

dkms status
pacman -Qs 'kernel|nvidia'

Offline

#8 2024-07-17 04:56:40

proofx
Member
Registered: 2024-07-09
Posts: 2

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

V1del wrote:

That should and does work for the majority of people, but "doesn't work" is not an error message. What exactly did you downgrade how? What output do you get from

dkms status
pacman -Qs 'kernel|nvidia'

dkms status output:

nvidia/550.90.07, 6.6.10-arch1-1, x86_64: installed

pacman -Qs 'kernel|nvidia' output:

local/dkms 3.0.12-1
    Dynamic Kernel Modules System
local/egl-wayland 2:1.1.13-2
    EGLStream-based Wayland external platform
local/fuse2 2.9.9-5
    Interface for userspace programs to export a filesystem to the Linux kernel
local/iptables 1:1.8.10-2
    Linux kernel packet control tool (using legacy interface)
local/kmod 32-1
    Linux kernel module management tools and library
local/libdrm 2.4.122-1
    Userspace interface to kernel DRM services
local/libnetfilter_conntrack 1.0.9-2
    Library providing an API to the in-kernel connection tracking state table
local/libnfnetlink 1.0.2-2
    Low-level library for netfilter related kernel/userspace communication
local/libsysprof-capture 46.0-3
    Kernel based performance profiler - capture library
local/linux 6.6.10.arch1-1
    The Linux kernel and modules
local/linux-api-headers 6.8-1
    Kernel headers sanitized for use in userspace
local/linux-headers 6.6.10.arch1-1
    Headers and scripts for building modules for the Linux kernel
local/mtdev 1.1.7-1
    A stand-alone library which transforms all variants of kernel MT events to the slotted type B protocol
local/nvidia-dkms 550.90.07-4
    NVIDIA drivers - module sources
local/nvidia-utils 550.90.07-4
    NVIDIA drivers utilities

i downgraded linux, linux-headers to 6.6 and removed and used downgrade package to install nvidia-dkms 550.90

im not sure what else to show but here's my xrandr output:

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected primary (normal left inverted right x axis y axis)
   1024x768      60.00 +
   1600x900      59.82
   1400x900      59.88
   1368x768      59.88    59.85
   1280x800      59.91    59.81
   1280x720      59.86    59.74
   1024x576      59.90    59.82
   960x540       59.82    59.63
   864x486       59.92    59.57
   800x600       72.19    60.32    56.25
   800x450       59.82
   700x450       59.88
   684x384       59.88    59.85
   640x480       59.94
   640x400       59.98    59.88
   640x360       59.86    59.83
   512x384       60.00
   512x288       60.00    59.92
   480x270       59.82    59.63
   432x243       59.92    59.57
   400x300       72.19    60.32    56.34
   320x240       60.05
eDP-1-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1920x1080    144.00*+  60.01    59.97    59.96    60.00    59.93
   1680x1050     59.95    59.88
   1400x1050     74.76    59.98
   1600x900      59.99    59.94    59.95    59.82
   1280x1024     85.02    75.02    60.02
   1400x900      59.96    59.88
   1280x960      85.00    60.00
   1440x810      60.00    59.97
   1368x768      59.88    59.85
   1280x800      59.99    59.97    59.81    59.91
   1152x864      75.00
   1280x720      60.00    59.99    59.86    59.74
   1024x768      85.00    75.05    60.04    85.00    75.03    70.07    60.00
   1024x768i     86.96
   960x720       85.00    75.00    60.00
   928x696       75.00    60.05
   896x672       75.05    60.01
   1024x576      59.95    59.96    59.90    59.82
   960x600       59.93    60.00
   832x624       74.55
   960x540       59.96    59.99    59.63    59.82
   800x600       85.00    75.00    70.00    65.00    60.00    85.14    72.19    75.00    60.32    56.25
   840x525       60.01    59.88
   864x486       59.92    59.57
   700x525       74.76    59.98
   800x450       59.95    59.82
   640x512       85.02    75.02    60.02
   700x450       59.96    59.88
   640x480       85.09    60.00    85.01    72.81    75.00    59.94
   720x405       59.51    58.99
   720x400       85.04
   684x384       59.88    59.85
   640x400       59.88    59.98    85.08
   576x432       75.00
   640x360       59.86    59.83    59.84    59.32
   640x350       85.08
   512x384       85.00    75.03    70.07    60.00
   512x384i      87.06
   512x288       60.00    59.92
   416x312       74.66
   480x270       59.63    59.82
   400x300       85.27    72.19    75.12    60.32    56.34
   432x243       59.92    59.57
   320x240       85.18    72.81    75.00    60.05
   360x202       59.51    59.13
   360x200       85.04
   320x200       85.27
   320x180       59.84    59.32
   320x175       85.27
HDMI-1-1 disconnected (normal left inverted right x axis y axis)
  1600x900 (0x20c) 97.500MHz +HSync -VSync
        h: width  1600 start 1648 end 1680 total 1760 skew    0 clock  55.40KHz
        v: height  900 start  903 end  908 total  926           clock  59.82Hz
  1400x900 (0x20f) 86.500MHz +HSync -VSync
        h: width  1400 start 1448 end 1480 total 1560 skew    0 clock  55.45KHz
        v: height  900 start  903 end  913 total  926           clock  59.88Hz
  1368x768 (0x213) 85.250MHz -HSync +VSync
        h: width  1368 start 1440 end 1576 total 1784 skew    0 clock  47.79KHz
        v: height  768 start  771 end  781 total  798           clock  59.88Hz
  1368x768 (0x214) 72.250MHz +HSync -VSync
        h: width  1368 start 1416 end 1448 total 1528 skew    0 clock  47.28KHz
        v: height  768 start  771 end  781 total  790           clock  59.85Hz
  1280x800 (0x217) 83.500MHz -HSync +VSync
        h: width  1280 start 1352 end 1480 total 1680 skew    0 clock  49.70KHz
        v: height  800 start  803 end  809 total  831           clock  59.81Hz
  1280x800 (0x218) 71.000MHz +HSync -VSync
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  49.31KHz
        v: height  800 start  803 end  809 total  823           clock  59.91Hz
  1280x720 (0x21b) 74.500MHz -HSync +VSync
        h: width  1280 start 1344 end 1472 total 1664 skew    0 clock  44.77KHz
        v: height  720 start  723 end  728 total  748           clock  59.86Hz
  1280x720 (0x21c) 63.750MHz +HSync -VSync
        h: width  1280 start 1328 end 1360 total 1440 skew    0 clock  44.27KHz
        v: height  720 start  723 end  728 total  741           clock  59.74Hz
  1024x768 (0x1d1) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  1024x576 (0x22b) 46.500MHz -HSync +VSync
        h: width  1024 start 1064 end 1160 total 1296 skew    0 clock  35.88KHz
        v: height  576 start  579 end  584 total  599           clock  59.90Hz
  1024x576 (0x22c) 42.000MHz +HSync -VSync
        h: width  1024 start 1072 end 1104 total 1184 skew    0 clock  35.47KHz
        v: height  576 start  579 end  584 total  593           clock  59.82Hz
  960x540 (0x232) 40.750MHz -HSync +VSync
        h: width   960 start  992 end 1088 total 1216 skew    0 clock  33.51KHz
        v: height  540 start  543 end  548 total  562           clock  59.63Hz
  960x540 (0x233) 37.250MHz +HSync -VSync
        h: width   960 start 1008 end 1040 total 1120 skew    0 clock  33.26KHz
        v: height  540 start  543 end  548 total  556           clock  59.82Hz
  800x600 (0x1d3) 50.000MHz +HSync +VSync
        h: width   800 start  856 end  976 total 1040 skew    0 clock  48.08KHz
        v: height  600 start  637 end  643 total  666           clock  72.19Hz
  800x600 (0x1d4) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x1d5) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  864x486 (0x23c) 32.500MHz -HSync +VSync
        h: width   864 start  888 end  968 total 1072 skew    0 clock  30.32KHz
        v: height  486 start  489 end  494 total  506           clock  59.92Hz
  864x486 (0x23d) 30.500MHz +HSync -VSync
        h: width   864 start  912 end  944 total 1024 skew    0 clock  29.79KHz
        v: height  486 start  489 end  494 total  500           clock  59.57Hz
  800x450 (0x241) 48.750MHz +HSync -VSync DoubleScan
        h: width   800 start  824 end  840 total  880 skew    0 clock  55.40KHz
        v: height  450 start  451 end  454 total  463           clock  59.82Hz
  700x450 (0x246) 43.250MHz +HSync -VSync DoubleScan
        h: width   700 start  724 end  740 total  780 skew    0 clock  55.45KHz
        v: height  450 start  451 end  456 total  463           clock  59.88Hz
  640x480 (0x1da) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  684x384 (0x24e) 42.625MHz -HSync +VSync DoubleScan
        h: width   684 start  720 end  788 total  892 skew    0 clock  47.79KHz
        v: height  384 start  385 end  390 total  399           clock  59.88Hz
  684x384 (0x24f) 36.125MHz +HSync -VSync DoubleScan
        h: width   684 start  708 end  724 total  764 skew    0 clock  47.28KHz
        v: height  384 start  385 end  390 total  395           clock  59.85Hz
  640x400 (0x250) 41.750MHz -HSync +VSync DoubleScan
        h: width   640 start  676 end  740 total  840 skew    0 clock  49.70KHz
        v: height  400 start  401 end  404 total  415           clock  59.88Hz
  640x400 (0x251) 35.500MHz +HSync -VSync DoubleScan
        h: width   640 start  664 end  680 total  720 skew    0 clock  49.31KHz
        v: height  400 start  401 end  404 total  411           clock  59.98Hz
  640x360 (0x254) 37.250MHz -HSync +VSync DoubleScan
        h: width   640 start  672 end  736 total  832 skew    0 clock  44.77KHz
        v: height  360 start  361 end  364 total  374           clock  59.86Hz
  640x360 (0x255) 31.875MHz +HSync -VSync DoubleScan
        h: width   640 start  664 end  680 total  720 skew    0 clock  44.27KHz
        v: height  360 start  361 end  364 total  370           clock  59.83Hz
  512x384 (0x25c) 32.500MHz -HSync -VSync DoubleScan
        h: width   512 start  524 end  592 total  672 skew    0 clock  48.36KHz
        v: height  384 start  385 end  388 total  403           clock  60.00Hz
  512x288 (0x25e) 23.250MHz -HSync +VSync DoubleScan
        h: width   512 start  532 end  580 total  648 skew    0 clock  35.88KHz
        v: height  288 start  289 end  292 total  299           clock  60.00Hz
  512x288 (0x25f) 21.000MHz +HSync -VSync DoubleScan
        h: width   512 start  536 end  552 total  592 skew    0 clock  35.47KHz
        v: height  288 start  289 end  292 total  296           clock  59.92Hz
  480x270 (0x261) 20.375MHz -HSync +VSync DoubleScan
        h: width   480 start  496 end  544 total  608 skew    0 clock  33.51KHz
        v: height  270 start  271 end  274 total  281           clock  59.63Hz
  480x270 (0x262) 18.625MHz +HSync -VSync DoubleScan
        h: width   480 start  504 end  520 total  560 skew    0 clock  33.26KHz
        v: height  270 start  271 end  274 total  278           clock  59.82Hz
  400x300 (0x264) 25.000MHz +HSync +VSync DoubleScan
        h: width   400 start  428 end  488 total  520 skew    0 clock  48.08KHz
        v: height  300 start  318 end  321 total  333           clock  72.19Hz
  400x300 (0x266) 20.000MHz +HSync +VSync DoubleScan
        h: width   400 start  420 end  484 total  528 skew    0 clock  37.88KHz
        v: height  300 start  300 end  302 total  314           clock  60.32Hz
  400x300 (0x267) 18.000MHz +HSync +VSync DoubleScan
        h: width   400 start  412 end  448 total  512 skew    0 clock  35.16KHz
        v: height  300 start  300 end  301 total  312           clock  56.34Hz
  432x243 (0x268) 16.250MHz -HSync +VSync DoubleScan
        h: width   432 start  444 end  484 total  536 skew    0 clock  30.32KHz
        v: height  243 start  244 end  247 total  253           clock  59.92Hz
  432x243 (0x269) 15.250MHz +HSync -VSync DoubleScan
        h: width   432 start  456 end  472 total  512 skew    0 clock  29.79KHz
        v: height  243 start  244 end  247 total  250           clock  59.57Hz
  320x240 (0x26d) 12.587MHz -HSync -VSync DoubleScan
        h: width   320 start  328 end  376 total  400 skew    0 clock  31.47KHz
        v: height  240 start  245 end  246 total  262           clock  60.05Hz

previously couple of weeks back it did not show HDMI-1-1 disconnected outputs aswell but now it does.
i tried with arandr aswell, it detects the monitor but it wont display anything. I've checked cables aswell its working fine with my windows machine and a ubuntu machine.

Offline

#9 2024-07-17 07:23:13

seth
Member
Registered: 2012-09-03
Posts: 58,214

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
There's a deactivated output on HDMI-0 but it defaults to XGA, which is odd.
Does

xrandr --output HDMI-0 --auto

do anything?

Offline

#10 2024-07-23 14:48:15

phunni
Member
From: Bristol, UK
Registered: 2003-08-13
Posts: 787

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

Does anyone know if there's a time frame on when the next version of the driver will be released? I realise there's no guarantee that the next one will fix this bug, but I'm really hoping so as my whole system is frozen on older packages until this gets fixed...

Offline

#11 2024-07-23 15:32:33

seth
Member
Registered: 2012-09-03
Posts: 58,214

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

my whole system is frozen on older packages until this gets fixed...

No it's not.
https://aur.archlinux.org/packages/nvidia-535xx-dkms

Offline

#12 2024-07-23 16:00:12

phunni
Member
From: Bristol, UK
Registered: 2003-08-13
Posts: 787

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

seth wrote:

my whole system is frozen on older packages until this gets fixed...

No it's not.
https://aur.archlinux.org/packages/nvidia-535xx-dkms

Yes it is - I'm on an immutable system that, unfortunately, can't use dkms packages. https://github.com/cleanroom-team/cleanroom if you're interested.

Offline

#13 2024-07-23 22:02:01

seth
Member
Registered: 2012-09-03
Posts: 58,214

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

Is nvidia-open an option?

Offline

#14 2024-07-24 22:07:32

m2rsh
Member
Registered: 2024-07-04
Posts: 4

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

seth wrote:

Is nvidia-open an option?

I tried both nvidia-open-beta-dkms and nvidia-beta-dkms (both 560.28.03-1) and my display connected via DVI is still not displaying anything here's my xorg log (running nvidia-open)

[     6.624] (--) Log file renamed from "/var/log/Xorg.pid-728.log" to "/var/log/Xorg.0.log"
[     6.625] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[     6.625] Current Operating System: Linux archlinux 6.10.0-arch1-2 #1 SMP PREEMPT_DYNAMIC Mon, 22 Jul 2024 17:28:23 +0000 x86_64
[     6.625] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=432be9cb-6657-4666-a749-ac9752f74169 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs nvidia_drm.modeset=1 nvidia.NVreg_PreserveVideoMemoryAllocations=1
[     6.625]  
[     6.625] Current version of pixman: 0.43.4
[     6.625] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.625] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.626] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 24 23:59:54 2024
[     6.627] (==) Using config file: "/etc/X11/xorg.conf"
[     6.627] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.627] (==) ServerLayout "Layout0"
[     6.627] (**) |-->Screen "Screen0" (0)
[     6.627] (**) |   |-->Monitor "Monitor0"
[     6.627] (**) |   |-->Device "Device0"
[     6.627] (**) |-->Input Device "Keyboard0"
[     6.627] (**) |-->Input Device "Mouse0"
[     6.627] (**) Option "Xinerama" "0"
[     6.627] (**) Allowing byte-swapped clients
[     6.627] (==) Automatically adding devices
[     6.627] (==) Automatically enabling devices
[     6.627] (==) Automatically adding GPU devices
[     6.627] (==) Automatically binding GPU devices
[     6.627] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.628] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     6.628] 	Entry deleted from font path.
[     6.628] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     6.628] 	Entry deleted from font path.
[     6.628] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     6.628] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     6.628] 	Entry deleted from font path.
[     6.628] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     6.628] 	Entry deleted from font path.
[     6.628] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     6.628] 	Entry deleted from font path.
[     6.628] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     6.628] 	Entry deleted from font path.
[     6.628] (==) FontPath set to:
	
[     6.628] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.628] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     6.628] (WW) Disabling Keyboard0
[     6.628] (WW) Disabling Mouse0
[     6.628] (II) Module ABI versions:
[     6.628] 	X.Org ANSI C Emulation: 0.4
[     6.628] 	X.Org Video Driver: 25.2
[     6.628] 	X.Org XInput driver : 24.4
[     6.628] 	X.Org Server Extension : 10.0
[     6.629] (++) using VT number 2

[     6.629] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.629] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.629] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     6.630] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     6.631] (--) PCI:*(1@0:0:0) 10de:1f82:1458:4027 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     6.631] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     6.631] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[     6.631] (II) LoadModule: "dbe"
[     6.631] (II) Module "dbe" already built-in
[     6.631] (II) LoadModule: "extmod"
[     6.631] (II) Module "extmod" already built-in
[     6.631] (II) LoadModule: "glx"
[     6.631] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.646] (II) Module glx: vendor="X.Org Foundation"
[     6.646] 	compiled for 1.21.1.13, module version = 1.0.0
[     6.646] 	ABI class: X.Org Server Extension, version 10.0
[     6.646] (II) LoadModule: "nvidia"
[     6.646] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.662] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.662] 	compiled for 1.6.99.901, module version = 1.0.0
[     6.662] 	Module class: X.Org Video Driver
[     6.662] (II) NVIDIA dlloader X Driver  560.28.03  Thu Jul 18 20:31:10 UTC 2024
[     6.662] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.663] (II) Loading sub module "fb"
[     6.663] (II) LoadModule: "fb"
[     6.663] (II) Module "fb" already built-in
[     6.663] (II) Loading sub module "wfb"
[     6.663] (II) LoadModule: "wfb"
[     6.663] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.664] (II) Module wfb: vendor="X.Org Foundation"
[     6.664] 	compiled for 1.21.1.13, module version = 1.0.0
[     6.664] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.664] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     6.664] (==) NVIDIA(0): RGB weight 888
[     6.664] (==) NVIDIA(0): Default visual is TrueColor
[     6.664] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.665] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     6.665] (**) NVIDIA(0): Option "Stereo" "0"
[     6.665] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "HDMI-0"
[     6.665] (**) NVIDIA(0): Option "SLI" "Off"
[     6.665] (**) NVIDIA(0): Option "MultiGPU" "Off"
[     6.665] (**) NVIDIA(0): Option "BaseMosaic" "off"
[     6.665] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     6.665] (**) NVIDIA(0): Stereo disabled by request
[     6.665] (**) NVIDIA(0): NVIDIA SLI disabled.
[     6.665] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[     6.665] (**) NVIDIA(0): Option "MetaModes" "DVI-D-0: nvidia-auto-select +1920+0, HDMI-0: nvidia-auto-select +0+0"
[     6.665] (**) NVIDIA(0): Enabling 2D acceleration
[     6.665] (II) Loading sub module "glxserver_nvidia"
[     6.665] (II) LoadModule: "glxserver_nvidia"
[     6.665] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[     6.893] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     6.893] 	compiled for 1.6.99.901, module version = 1.0.0
[     6.893] 	Module class: X.Org Server Extension
[     6.893] (II) NVIDIA GLX Module  560.28.03  Thu Jul 18 20:39:53 UTC 2024
[     6.893] (II) NVIDIA: The X server supports PRIME Render Offload.
[     6.895] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     6.895] (--) NVIDIA(0):     DFP-0 (boot)
[     6.895] (--) NVIDIA(0):     DFP-1
[     6.895] (--) NVIDIA(0):     DFP-2
[     6.895] (--) NVIDIA(0):     DFP-3
[     6.900] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GTX 1650 (TU117-A) at PCI:1:0:0
[     6.900] (II) NVIDIA(0):     (GPU-0)
[     6.900] (--) NVIDIA(0): Memory: 4194304 kBytes
[     6.901] (--) NVIDIA(0): VideoBIOS: 90.17.4d.00.68
[     6.901] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     6.947] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[     6.947] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[     6.947] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 600.0 MHz maximum pixel clock
[     6.947] (--) NVIDIA(GPU-0): 
[     6.947] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     6.947] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[     6.947] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[     6.947] (--) NVIDIA(GPU-0): 
[     6.947] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     6.947] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[     6.947] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[     6.947] (--) NVIDIA(GPU-0): 
[     6.992] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): connected
[     6.992] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): Internal TMDS
[     6.992] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): 600.0 MHz maximum pixel clock
[     6.992] (--) NVIDIA(GPU-0): 
[     7.046] (II) NVIDIA(0): Validated MetaModes:
[     7.046] (II) NVIDIA(0):    
[     7.046] (II) NVIDIA(0):     "DVI-D-0:nvidia-auto-select+1920+0,HDMI-0:nvidia-auto-select+0+0"
[     7.046] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[     7.071] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[     7.071] (--) NVIDIA(0):     option
[     7.072] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[     7.072] (II) NVIDIA:     access.
[     7.082] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     7.082] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     7.082] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     7.082] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     7.082] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     7.082] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     7.082] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     7.082] (II) NVIDIA(0):     Config Options in the README.
[     7.103] (II) NVIDIA(0): Setting mode "DVI-D-0:nvidia-auto-select+1920+0,HDMI-0:nvidia-auto-select+0+0"
[     7.135] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.135] (==) NVIDIA(0): Backing store enabled
[     7.135] (==) NVIDIA(0): Silken mouse enabled
[     7.135] (**) NVIDIA(0): DPMS enabled
[     7.136] (II) Loading sub module "dri2"
[     7.136] (II) LoadModule: "dri2"
[     7.136] (II) Module "dri2" already built-in
[     7.136] (II) NVIDIA(0): [DRI2] Setup complete
[     7.136] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     7.136] (II) Initializing extension Generic Event Extension
[     7.136] (II) Initializing extension SHAPE
[     7.136] (II) Initializing extension MIT-SHM
[     7.136] (II) Initializing extension XInputExtension
[     7.136] (II) Initializing extension XTEST
[     7.136] (II) Initializing extension BIG-REQUESTS
[     7.136] (II) Initializing extension SYNC
[     7.136] (II) Initializing extension XKEYBOARD
[     7.136] (II) Initializing extension XC-MISC
[     7.136] (II) Initializing extension SECURITY
[     7.136] (II) Initializing extension XFIXES
[     7.136] (II) Initializing extension RENDER
[     7.137] (II) Initializing extension RANDR
[     7.137] (II) Initializing extension COMPOSITE
[     7.137] (II) Initializing extension DAMAGE
[     7.137] (II) Initializing extension MIT-SCREEN-SAVER
[     7.137] (II) Initializing extension DOUBLE-BUFFER
[     7.137] (II) Initializing extension RECORD
[     7.137] (II) Initializing extension DPMS
[     7.137] (II) Initializing extension Present
[     7.137] (II) Initializing extension DRI3
[     7.137] (II) Initializing extension X-Resource
[     7.137] (II) Initializing extension XVideo
[     7.137] (II) Initializing extension XVideo-MotionCompensation
[     7.137] (II) Initializing extension GLX
[     7.137] (II) Initializing extension GLX
[     7.137] (II) Indirect GLX disabled.
[     7.137] (II) GLX: Another vendor is already registered for screen 0
[     7.138] (II) Initializing extension XFree86-VidModeExtension
[     7.138] (II) Initializing extension XFree86-DGA
[     7.138] (II) Initializing extension XFree86-DRI
[     7.138] (II) Initializing extension DRI2
[     7.138] (II) Initializing extension NV-GLX
[     7.138] (II) Initializing extension NV-CONTROL
[     7.138] (II) Initializing extension XINERAMA
[     7.200] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     7.200] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.200] (II) LoadModule: "libinput"
[     7.200] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     7.206] (II) Module libinput: vendor="X.Org Foundation"
[     7.206] 	compiled for 1.21.1.13, module version = 1.4.0
[     7.206] 	Module class: X.Org XInput Driver
[     7.206] 	ABI class: X.Org XInput driver, version 24.4
[     7.206] (II) Using input driver 'libinput' for 'Power Button'
[     7.206] (**) Power Button: always reports core events
[     7.206] (**) Option "Device" "/dev/input/event1"
[     7.211] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.211] (II) event1  - Power Button: device is a keyboard
[     7.211] (II) event1  - Power Button: device removed
[     7.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     7.246] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.247] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.247] (II) event1  - Power Button: device is a keyboard
[     7.247] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     7.248] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.248] (II) Using input driver 'libinput' for 'Power Button'
[     7.248] (**) Power Button: always reports core events
[     7.248] (**) Option "Device" "/dev/input/event0"
[     7.248] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     7.248] (II) event0  - Power Button: device is a keyboard
[     7.248] (II) event0  - Power Button: device removed
[     7.273] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     7.273] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.274] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     7.274] (II) event0  - Power Button: device is a keyboard
[     7.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event3)
[     7.274] (II) No input driver specified, ignoring this device.
[     7.274] (II) This device may have been added with another device file.
[     7.275] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[     7.275] (II) No input driver specified, ignoring this device.
[     7.275] (II) This device may have been added with another device file.
[     7.275] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[     7.275] (II) No input driver specified, ignoring this device.
[     7.275] (II) This device may have been added with another device file.
[     7.275] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[     7.275] (II) No input driver specified, ignoring this device.
[     7.275] (II) This device may have been added with another device file.
[     7.276] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/event10)
[     7.276] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput pointer catchall"
[     7.276] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[     7.276] (**) Razer Razer Basilisk Essential: always reports core events
[     7.276] (**) Option "Device" "/dev/input/event10"
[     7.331] (II) event10 - Razer Razer Basilisk Essential: is tagged by udev as: Mouse
[     7.331] (II) event10 - Razer Razer Basilisk Essential: device is a pointer
[     7.331] (II) event10 - Razer Razer Basilisk Essential: device removed
[     7.383] (II) libinput: Razer Razer Basilisk Essential: Step value 0 was provided, libinput Fallback acceleration function is used.
[     7.383] (II) libinput: Razer Razer Basilisk Essential: Step value 0 was provided, libinput Fallback acceleration function is used.
[     7.383] (II) libinput: Razer Razer Basilisk Essential: Step value 0 was provided, libinput Fallback acceleration function is used.
[     7.383] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:1532:0065.0001/input/input11/event10"
[     7.383] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: MOUSE, id 8)
[     7.383] (**) Option "AccelerationScheme" "none"
[     7.383] (**) Razer Razer Basilisk Essential: (accel) selected scheme none/0
[     7.383] (**) Razer Razer Basilisk Essential: (accel) acceleration factor: 2.000
[     7.383] (**) Razer Razer Basilisk Essential: (accel) acceleration threshold: 4
[     7.441] (II) event10 - Razer Razer Basilisk Essential: is tagged by udev as: Mouse
[     7.441] (II) event10 - Razer Razer Basilisk Essential: device is a pointer
[     7.441] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/mouse1)
[     7.441] (II) No input driver specified, ignoring this device.
[     7.441] (II) This device may have been added with another device file.
[     7.442] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/event13)
[     7.442] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput keyboard catchall"
[     7.442] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[     7.442] (**) Razer Razer Basilisk Essential: always reports core events
[     7.442] (**) Option "Device" "/dev/input/event13"
[     7.443] (II) event13 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[     7.443] (II) event13 - Razer Razer Basilisk Essential: device is a keyboard
[     7.443] (II) event13 - Razer Razer Basilisk Essential: device removed
[     7.486] (II) libinput: Razer Razer Basilisk Essential: needs a virtual subdevice
[     7.486] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:1532:0065.0002/input/input21/event13"
[     7.486] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: MOUSE, id 9)
[     7.486] (**) Option "AccelerationScheme" "none"
[     7.486] (**) Razer Razer Basilisk Essential: (accel) selected scheme none/0
[     7.486] (**) Razer Razer Basilisk Essential: (accel) acceleration factor: 2.000
[     7.486] (**) Razer Razer Basilisk Essential: (accel) acceleration threshold: 4
[     7.487] (II) event13 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[     7.488] (II) event13 - Razer Razer Basilisk Essential: device is a keyboard
[     7.488] (II) config/udev: Adding input device Razer Razer Basilisk Essential (/dev/input/event16)
[     7.488] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput keyboard catchall"
[     7.488] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[     7.488] (**) Razer Razer Basilisk Essential: always reports core events
[     7.488] (**) Option "Device" "/dev/input/event16"
[     7.489] (II) event16 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[     7.489] (II) event16 - Razer Razer Basilisk Essential: device is a keyboard
[     7.489] (II) event16 - Razer Razer Basilisk Essential: device removed
[     7.513] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:1532:0065.0003/input/input22/event16"
[     7.513] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: KEYBOARD, id 10)
[     7.514] (II) event16 - Razer Razer Basilisk Essential: is tagged by udev as: Keyboard
[     7.514] (II) event16 - Razer Razer Basilisk Essential: device is a keyboard
[     7.515] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/event6)
[     7.515] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[     7.515] (II) Using input driver 'libinput' for 'Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard'
[     7.515] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: always reports core events
[     7.515] (**) Option "Device" "/dev/input/event6"
[     7.516] (II) event6  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[     7.516] (II) event6  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a keyboard
[     7.516] (II) event6  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device removed
[     7.540] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: needs a virtual subdevice
[     7.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:1B1C:1B89.0004/input/input6/event6"
[     7.540] (II) XINPUT: Adding extended input device "Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard" (type: MOUSE, id 11)
[     7.540] (**) Option "AccelerationScheme" "none"
[     7.540] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) selected scheme none/0
[     7.540] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration factor: 2.000
[     7.540] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration threshold: 4
[     7.541] (II) event6  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Keyboard
[     7.541] (II) event6  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a keyboard
[     7.542] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/event7)
[     7.542] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Applying InputClass "libinput pointer catchall"
[     7.542] (II) Using input driver 'libinput' for 'Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard'
[     7.542] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: always reports core events
[     7.542] (**) Option "Device" "/dev/input/event7"
[     7.597] (II) event7  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Mouse
[     7.597] (II) event7  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a pointer
[     7.597] (II) event7  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device removed
[     7.650] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Step value 0 was provided, libinput Fallback acceleration function is used.
[     7.650] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Step value 0 was provided, libinput Fallback acceleration function is used.
[     7.650] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Step value 0 was provided, libinput Fallback acceleration function is used.
[     7.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.3/0003:1B1C:1B89.0007/input/input7/event7"
[     7.650] (II) XINPUT: Adding extended input device "Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard" (type: MOUSE, id 12)
[     7.650] (**) Option "AccelerationScheme" "none"
[     7.650] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) selected scheme none/0
[     7.650] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration factor: 2.000
[     7.650] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: (accel) acceleration threshold: 4
[     7.707] (II) event7  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is tagged by udev as: Mouse
[     7.707] (II) event7  - Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: device is a pointer
[     7.708] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/js0)
[     7.708] (II) No input driver specified, ignoring this device.
[     7.708] (II) This device may have been added with another device file.
[     7.708] (II) config/udev: Adding input device Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard (/dev/input/mouse0)
[     7.708] (II) No input driver specified, ignoring this device.
[     7.708] (II) This device may have been added with another device file.
[     7.709] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[     7.709] (II) No input driver specified, ignoring this device.
[     7.709] (II) This device may have been added with another device file.
[     7.709] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[     7.709] (II) No input driver specified, ignoring this device.
[     7.709] (II) This device may have been added with another device file.
[     7.709] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event5)
[     7.709] (II) No input driver specified, ignoring this device.
[     7.709] (II) This device may have been added with another device file.
[     7.709] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14)
[     7.709] (II) No input driver specified, ignoring this device.
[     7.710] (II) This device may have been added with another device file.
[     7.710] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[     7.710] (II) No input driver specified, ignoring this device.
[     7.710] (II) This device may have been added with another device file.
[     7.710] (II) config/udev: Adding input device SteelSeries Arctis Nova 3 (/dev/input/event8)
[     7.710] (**) SteelSeries Arctis Nova 3: Applying InputClass "libinput keyboard catchall"
[     7.710] (II) Using input driver 'libinput' for 'SteelSeries Arctis Nova 3'
[     7.710] (**) SteelSeries Arctis Nova 3: always reports core events
[     7.710] (**) Option "Device" "/dev/input/event8"
[     7.711] (II) event8  - SteelSeries Arctis Nova 3: is tagged by udev as: Keyboard
[     7.711] (II) event8  - SteelSeries Arctis Nova 3: device is a keyboard
[     7.711] (II) event8  - SteelSeries Arctis Nova 3: device removed
[     7.753] (II) libinput: SteelSeries Arctis Nova 3: needs a virtual subdevice
[     7.753] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.3/0003:1038:12EC.0008/input/input8/event8"
[     7.753] (II) XINPUT: Adding extended input device "SteelSeries Arctis Nova 3" (type: MOUSE, id 13)
[     7.753] (**) Option "AccelerationScheme" "none"
[     7.753] (**) SteelSeries Arctis Nova 3: (accel) selected scheme none/0
[     7.753] (**) SteelSeries Arctis Nova 3: (accel) acceleration factor: 2.000
[     7.753] (**) SteelSeries Arctis Nova 3: (accel) acceleration threshold: 4
[     7.754] (II) event8  - SteelSeries Arctis Nova 3: is tagged by udev as: Keyboard
[     7.754] (II) event8  - SteelSeries Arctis Nova 3: device is a keyboard
[     7.755] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event2)
[     7.755] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.755] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     7.755] (**) Eee PC WMI hotkeys: always reports core events
[     7.755] (**) Option "Device" "/dev/input/event2"
[     7.755] (II) event2  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     7.755] (II) event2  - Eee PC WMI hotkeys: device is a keyboard
[     7.755] (II) event2  - Eee PC WMI hotkeys: device removed
[     7.806] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event2"
[     7.806] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[     7.807] (II) event2  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     7.807] (II) event2  - Eee PC WMI hotkeys: device is a keyboard
[     7.807] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[     7.807] (II) No input driver specified, ignoring this device.
[     7.807] (II) This device may have been added with another device file.
[     7.812] (**) Razer Razer Basilisk Essential: Applying InputClass "libinput keyboard catchall"
[     7.812] (II) Using input driver 'libinput' for 'Razer Razer Basilisk Essential'
[     7.812] (**) Razer Razer Basilisk Essential: always reports core events
[     7.812] (**) Option "Device" "/dev/input/event13"
[     7.812] (II) libinput: Razer Razer Basilisk Essential: is a virtual subdevice
[     7.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:1532:0065.0002/input/input21/event13"
[     7.812] (II) XINPUT: Adding extended input device "Razer Razer Basilisk Essential" (type: KEYBOARD, id 15)
[     7.813] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[     7.813] (II) Using input driver 'libinput' for 'Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard'
[     7.813] (**) Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: always reports core events
[     7.813] (**) Option "Device" "/dev/input/event6"
[     7.813] (II) libinput: Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard: is a virtual subdevice
[     7.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:1B1C:1B89.0004/input/input6/event6"
[     7.813] (II) XINPUT: Adding extended input device "Corsair CORSAIR K95 RGB PLATINUM XT Mechanical Gaming Keyboard" (type: KEYBOARD, id 16)
[     7.813] (**) SteelSeries Arctis Nova 3: Applying InputClass "libinput keyboard catchall"
[     7.813] (II) Using input driver 'libinput' for 'SteelSeries Arctis Nova 3'
[     7.813] (**) SteelSeries Arctis Nova 3: always reports core events
[     7.813] (**) Option "Device" "/dev/input/event8"
[     7.813] (II) libinput: SteelSeries Arctis Nova 3: is a virtual subdevice
[     7.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.3/0003:1038:12EC.0008/input/input8/event8"
[     7.813] (II) XINPUT: Adding extended input device "SteelSeries Arctis Nova 3" (type: KEYBOARD, id 17)
[    17.029] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[    17.029] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[    17.029] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 600.0 MHz maximum pixel clock
[    17.029] (--) NVIDIA(GPU-0): 
[    17.029] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    17.029] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[    17.029] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[    17.029] (--) NVIDIA(GPU-0): 
[    17.029] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    17.029] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    17.029] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    17.029] (--) NVIDIA(GPU-0): 
[    17.075] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): connected
[    17.075] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): Internal TMDS
[    17.075] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): 600.0 MHz maximum pixel clock
[    17.075] (--) NVIDIA(GPU-0): 
[    19.393] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[    19.393] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[    19.393] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 600.0 MHz maximum pixel clock
[    19.393] (--) NVIDIA(GPU-0): 
[    19.393] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    19.393] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[    19.393] (--) NVIDIA(GPU-0): DFP-1: 2660.0 MHz maximum pixel clock
[    19.393] (--) NVIDIA(GPU-0): 
[    19.394] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    19.394] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    19.394] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    19.394] (--) NVIDIA(GPU-0): 
[    19.438] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): connected
[    19.438] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): Internal TMDS
[    19.438] (--) NVIDIA(GPU-0): Microstep MSI MP221 (DFP-3): 600.0 MHz maximum pixel clock
[    19.438] (--) NVIDIA(GPU-0): 

Last edited by m2rsh (2024-07-24 22:08:09)

Offline

#15 2024-07-25 06:43:45

seth
Member
Registered: 2012-09-03
Posts: 58,214

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

The remark was meant for phunni, b/c nvida-open avoids at least the apparent 55yxx memory corruption issues of the binary driver and https://archlinux.org/packages/extra/x8 … idia-open/ is in the repos..

Using config file: "/etc/X11/xorg.conf"

generally get rid of that file, but the issue at hand might be in the DDX driver (ie nvidia-utils, not the kernel module) and then nvidaz-open can't help you either sad

Offline

#16 2024-07-31 12:23:40

phunni
Member
From: Bristol, UK
Registered: 2003-08-13
Posts: 787

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

seth wrote:

Is nvidia-open an option?

Probably, although I'm not sure it supports my old card - GTX 1070

Offline

#17 2024-07-31 14:03:09

seth
Member
Registered: 2012-09-03
Posts: 58,214

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

That should be a Turing chip - which are supported by nvidia-open.

Offline

#18 2024-07-31 14:19:40

phunni
Member
From: Bristol, UK
Registered: 2003-08-13
Posts: 787

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

seth wrote:

That should be a Turing chip - which are supported by nvidia-open.

Thanks - I'll give it a go then.

Offline

#19 2024-07-31 17:39:15

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,072

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

1070 should be Pascal and not supported, sadly...

Offline

#20 2024-07-31 19:29:58

seth
Member
Registered: 2012-09-03
Posts: 58,214

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

There's even https://en.wikipedia.org/wiki/GeForce_10_series - maybe should™ not have gone w/ the first google result… sorry sad

Offline

#21 2024-07-31 20:27:37

phunni
Member
From: Bristol, UK
Registered: 2003-08-13
Posts: 787

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

Can confirm - is not supported.

Offline

#22 2024-08-03 13:06:57

m2rsh
Member
Registered: 2024-07-04
Posts: 4

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

NVIDIA is apparently working on it "Thank you everyone for sharing the details, I am able to replicate issue locally which will help us to debug it now. Shall update further once I have feedback from engineering team." this message is from like a day ago https://forums.developer.nvidia.com/t/b … /298311/21

Offline

#23 2024-08-03 13:13:27

phunni
Member
From: Bristol, UK
Registered: 2003-08-13
Posts: 787

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

m2rsh wrote:

NVIDIA is apparently working on it "Thank you everyone for sharing the details, I am able to replicate issue locally which will help us to debug it now. Shall update further once I have feedback from engineering team." this message is from like a day ago https://forums.developer.nvidia.com/t/b … /298311/21

Excellent news - here's hoping it didn't take too long...

Offline

#24 2024-08-07 18:43:05

phunni
Member
From: Bristol, UK
Registered: 2003-08-13
Posts: 787

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

Does anyone know how long these things can usually be expected to take? I'm trying to decide if I should just buy a new GPU - an AMD one this time. I can't really afford it and would have to go from an old, but (in it's day) high end to a relatively budget one. That said, I imagine most modern budget ones would outperform my dinosaur anyway.

If it's likely to be a question of weeks, then I'll probably just hang on, but waiting months would be very frustrating...

Offline

#25 2024-08-07 23:42:11

Scimmia
Fellow
Registered: 2012-09-01
Posts: 12,045

Re: NVidia 555 Display Issues with Dual Monitor on Gnome

The 560 drivers should be out soon, they're in their second beta. No idea if they've fixed this issue, though.

Offline

Board footer

Powered by FluxBB