You are not logged in.
Pages: 1
So over the past 2 weeks or so I've been trying to install various different distros on my computer after deciding I really wanted to go back to linux.
First, I tried arch, but couldn't get the internet working so I scrapped that.
Next, I tried Kubuntu 9.04, but couldn't get the internet working their either.
This morning I tried Ubuntu 9.04, and still the same problem.
I put windows back on my computer to make sure that it wasn't a hardware problem, and I indeed could access the internet there. Then, out of desperation, I installed Ubuntu 8.04 which is the last linux distro I had on my computer that worked. And guess what, it still works!
Since I obviously don't want to be stuck with older versions of Ubuntu and other distros, I want to figure out the problem. But I'm not sure what it could be.
What do Arch, (K)Ubuntu 9.04 have in common that Ubuntu 8.04 does not?
I'd really appreciate any input on the matter because I've been butting my head against a brick wall for 2 weeks, and I just want to figure it out already. Thank you!
Offline
What errors do you get when you can't connect? Do you have any network, can you connect to your router for example?
All men have stood for freedom...
For freedom is the man that will turn the world upside down.
Gerrard Winstanley.
Offline
When I attempt to ping anything I get "Unkown host" errors. I can't connect to the router either, I think that returns a "network unreachable" error.
Offline
Can you do a lspci for us and post the return? And how are you connecting to the router?
Offline
I'm not at the computer with the problem at the moment, but I can tell you that my ethernet card is...
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
And I'm trying to connect to the router through a wired connection. I've tried dhcpcd (arch) and dhcleint (ubuntu) and neither have worked.
Offline
Do you know if you have the module for that card? If you have hwd installed (I think it is on the boot-cd) try running, as root:
hwd -e
locate your ethernet card in there and it should tell you what module you need. Then load it and see if it works. If you have ubuntu still installed, you might be able to do it through there.
Googling returns that there are a couple people with this problem: http://forum.vectorlinux.com/index.php?topic=9060.0
http://www.google.com/search?q=nVidia+C … =firefox-a
Linux-specific: http://www.google.com/linux?hl=en&q=nVi … tnG=Search
Offline
I have tried manually loading modules for my card in the past.
It requires foredeth, and even after loading that the problem persists in both arch and ubuntu.
Thank you for the search results.
Offline
Do you get anything out of dmesg?
Offline
I'll post the results later today.
Offline
I doubt this is the problem based on what you're saying but I'm throwing it out ther efor giggles. I have to disable IPV6 in every distro EXCEPT Ubuntu. I'm assuming it isn't enabled by default in Ubuntu.
Having said that, when IPV6 is enabled, for me, it just makes for REALLY slow internet, but I do get online and on the network and all that.
If for some reason that is the problem, there is a detailed walkthrough in the wiki. Simply search "disable IPV6".
Offline
If you manually loaded the driver as 'foredeth', no wonder it didn't work - it should be 'forcedeth' (unless my memory serves me wrong yet again ...)
Offline
Compare the output of the following commands between a working distro and a broken distro:
ifconfig
route -n
cat /etc/resolv.conf
If there's no output from the first, add the -a option to it.
Are you familiar with our Forum Rules, and How To Ask Questions The Smart Way?
BlueHackers // fscanary // resticctl
Offline
Running dmesg returns
[ 38.067668] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 38.067669] CPU: L2 cache: 4096K
[ 38.067671] CPU 1/3 -> Node 0
[ 38.067672] CPU: Physical Processor ID: 0
[ 38.067673] CPU: Processor Core ID: 3
[ 38.067678] CPU1: Thermal monitoring enabled (TM1)
[ 38.068073] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 38.068158] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 38.088179] SMP alternatives: switching to SMP code
[ 38.088557] Booting processor 2/4 APIC 0x1
[ 38.099157] Initializing CPU#2
[ 38.175492] Calibrating delay using timer specific routine.. 4799.95 BogoMIPS (lpj=9599902)
[ 38.175497] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 38.175498] CPU: L2 cache: 4096K
[ 38.175499] CPU 2/1 -> Node 0
[ 38.175501] CPU: Physical Processor ID: 0
[ 38.175501] CPU: Processor Core ID: 1
[ 38.175507] CPU2: Thermal monitoring enabled (TM1)
[ 38.175900] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 38.175945] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 38.195981] SMP alternatives: switching to SMP code
[ 38.196499] Booting processor 3/4 APIC 0x2
[ 38.206840] Initializing CPU#3
[ 38.287314] Calibrating delay using timer specific routine.. 4800.00 BogoMIPS (lpj=9600001)
[ 38.287319] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 38.287320] CPU: L2 cache: 4096K
[ 38.287322] CPU 3/2 -> Node 0
[ 38.287323] CPU: Physical Processor ID: 0
[ 38.287324] CPU: Processor Core ID: 2
[ 38.287329] CPU3: Thermal monitoring enabled (TM1)
[ 38.287724] Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 38.287786] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 38.307769] Brought up 4 CPUs
[ 38.307874] CPU0 attaching sched-domain:
[ 38.307876] domain 0: span 05
[ 38.307877] groups: 01 04
[ 38.307879] domain 1: span 0f
[ 38.307880] groups: 05 0a
[ 38.307882] domain 2: span 0f
[ 38.307883] groups: 0f
[ 38.307885] CPU1 attaching sched-domain:
[ 38.307886] domain 0: span 0a
[ 38.307887] groups: 02 08
[ 38.307889] domain 1: span 0f
[ 38.307890] groups: 0a 05
[ 38.307892] domain 2: span 0f
[ 38.307893] groups: 0f
[ 38.307894] CPU2 attaching sched-domain:
[ 38.307895] domain 0: span 05
[ 38.307896] groups: 04 01
[ 38.307898] domain 1: span 0f
[ 38.307899] groups: 05 0a
[ 38.307901] domain 2: span 0f
[ 38.307902] groups: 0f
[ 38.307903] CPU3 attaching sched-domain:
[ 38.307904] domain 0: span 0a
[ 38.307905] groups: 08 02
[ 38.307907] domain 1: span 0f
[ 38.307908] groups: 0a 05
[ 38.307910] domain 2: span 0f
[ 38.307911] groups: 0f
[ 38.308132] net_namespace: 120 bytes
[ 38.308430] Time: 10:46:45 Date: 08/15/09
[ 38.308448] NET: Registered protocol family 16
[ 38.308586] ACPI: bus type pci registered
[ 38.308641] PCI: Using configuration type 1
[ 38.309923] ACPI: EC: Look up EC in DSDT
[ 38.315698] ACPI: Interpreter enabled
[ 38.315700] ACPI: (supports S0 S1 S3 S4 S5)
[ 38.315711] ACPI: Using IOAPIC for interrupt routing
[ 38.323732] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 38.325433] PCI: Transparent bridge - 0000:00:10.0
[ 38.325452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 38.325703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 38.391320] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.391466] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.391611] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[ 38.391755] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.391899] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
[ 38.392043] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 38.392186] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.392330] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.392474] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 38.392617] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.392762] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 38.392910] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.393055] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 38.393198] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.393344] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.393489] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 38.393633] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 38.393776] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 38.393921] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 38.394069] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 38.394243] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 38.394409] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 38.394575] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 38.394739] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 38.394905] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 38.395069] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 38.395243] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 38.395409] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 38.395574] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 38.395739] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 38.395906] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 38.396071] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 38.396237] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 38.396404] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 38.396570] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 38.396737] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 38.396903] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 38.397069] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 38.397236] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 38.397406] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 38.397573] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 38.397677] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 38.397698] pnp: PnP ACPI init
[ 38.397703] ACPI: bus type pnp registered
[ 38.401638] pnp: PnP ACPI: found 14 devices
[ 38.401640] ACPI: ACPI bus type pnp unregistered
[ 38.401810] PCI: Using ACPI for IRQ routing
[ 38.401812] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 38.411146] NET: Registered protocol family 8
[ 38.411147] NET: Registered protocol family 20
[ 38.411173] PCI-GART: No AMD northbridge found.
[ 38.411180] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 38.411182] hpet0: 3 32-bit timers, 25000000 Hz
[ 38.412211] AppArmor: AppArmor Filesystem Enabled
[ 38.415112] Time: tsc clocksource has been installed.
[ 38.415117] Switched to high resolution mode on CPU 0
[ 38.415578] Switched to high resolution mode on CPU 2
[ 38.415603] Switched to high resolution mode on CPU 3
[ 38.415622] Switched to high resolution mode on CPU 1
[ 38.423073] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 38.423075] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 38.423077] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 38.423079] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 38.423081] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 38.423082] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 38.423084] system 00:01: iomem range 0x0-0x0 could not be reserved
[ 38.423088] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 38.423089] system 00:02: ioport range 0x800-0x87f has been reserved
[ 38.423091] system 00:02: ioport range 0x290-0x297 has been reserved
[ 38.423093] system 00:02: ioport range 0x880-0x88f has been reserved
[ 38.423099] system 00:0c: iomem range 0xf0000000-0xf1ffffff could not be reserved
[ 38.423103] system 00:0d: iomem range 0xda000-0xdbfff has been reserved
[ 38.423105] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 38.423107] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 38.423108] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 38.423110] system 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 38.423112] system 00:0d: iomem range 0xcfef0000-0xcfefffff could not be reserved
[ 38.423114] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[ 38.423116] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 38.423118] system 00:0d: iomem range 0x100000-0xcfeeffff could not be reserved
[ 38.423120] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 38.423121] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 38.423123] system 00:0d: iomem range 0xfeff0000-0xfeff03ff could not be reserved
[ 38.423406] PCI: Bridge: 0000:00:03.0
[ 38.423408] IO window: 9000-9fff
[ 38.423410] MEM window: f8000000-fbffffff
[ 38.423412] PREFETCH window: e0000000-efffffff
[ 38.423416] PCI: Bridge: 0000:00:05.0
[ 38.423417] IO window: 7000-7fff
[ 38.423419] MEM window: f4000000-f7ffffff
[ 38.423421] PREFETCH window: d0000000-dfffffff
[ 38.423424] PCI: Bridge: 0000:00:07.0
[ 38.423425] IO window: a000-bfff
[ 38.423427] MEM window: fdd00000-fddfffff
[ 38.423429] PREFETCH window: fdc00000-fdcfffff
[ 38.423432] PCI: Bridge: 0000:00:10.0
[ 38.423433] IO window: 8000-8fff
[ 38.423436] MEM window: fdf00000-fdffffff
[ 38.423438] PREFETCH window: fde00000-fdefffff
[ 38.423449] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 38.423457] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 38.423464] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 38.423471] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 38.423478] NET: Registered protocol family 2
[ 38.459100] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 38.459984] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 38.462961] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 38.463469] TCP: Hash tables configured (established 524288 bind 65536)
[ 38.463472] TCP reno registered
[ 38.475117] checking if image is initramfs... it is
[ 39.039925] Freeing initrd memory: 7555k freed
[ 39.043732] audit: initializing netlink socket (disabled)
[ 39.043744] audit(1250333203.508:1): initialized
[ 39.045559] VFS: Disk quotas dquot_6.5.1
[ 39.045614] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 39.045700] io scheduler noop registered
[ 39.045702] io scheduler anticipatory registered
[ 39.045703] io scheduler deadline registered
[ 39.045785] io scheduler cfq registered (default)
[ 39.045909] pci 0000:00:03.0: Quirk disabling HT MSI mapping<6>pci 0000:00:05.0: Quirk disabling HT MSI mapping<6>pci 0000:00:07.0: Quirk disabling HT MSI mapping<6>pci 0000:00:09.0: Quirk disabling HT MSI mapping<6>pci 0000:00:0e.0: Quirk disabling HT MSI mapping<6>pci 0000:00:0f.0: Quirk disabling HT MSI mapping<6>pci 0000:00:10.0: Quirk disabling HT MSI mapping<6>pci 0000:00:10.1: Quirk disabling HT MSI mapping<7>Boot video device is 0000:01:00.0
[ 39.065844] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 39.065873] assign_interrupt_mode Found MSI capability
[ 39.065895] Allocate Port Service[0000:00:03.0:pcie00]
[ 39.065961] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 39.065990] assign_interrupt_mode Found MSI capability
[ 39.066009] Allocate Port Service[0000:00:05.0:pcie00]
[ 39.066081] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 39.066110] assign_interrupt_mode Found MSI capability
[ 39.066130] Allocate Port Service[0000:00:07.0:pcie00]
[ 39.086522] Real Time Clock Driver v1.12ac
[ 39.086664] hpet_resources: 0xfeff0000 is busy
[ 39.086690] Linux agpgart interface v0.102
[ 39.086692] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 39.086810] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 39.087238] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 39.087859] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 39.087906] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 39.087975] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 39.087977] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 39.088068] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 39.103523] mice: PS/2 mouse device common for all mice
[ 39.103556] cpuidle: using governor ladder
[ 39.103558] cpuidle: using governor menu
[ 39.103662] NET: Registered protocol family 1
[ 39.103735] registered taskstats version 1
[ 39.103841] Magic number: 5:434:780
[ 39.103861] hash matches device ptyq2
[ 39.103875] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 39.103877] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 39.103878] EDD information not available.
[ 39.103886] Freeing unused kernel memory: 320k freed
[ 39.105291] Write protecting the kernel read-only data: 1036k
[ 39.119934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 40.284154] fuse init (API version 7.9)
[ 40.294804] ACPI: Fan [FAN] (on)
[ 40.299280] ACPI: Thermal Zone [THRM] (40 C)
[ 40.482973] SCSI subsystem initialized
[ 40.496746] usbcore: registered new interface driver usbfs
[ 40.496764] usbcore: registered new interface driver hub
[ 40.501441] usbcore: registered new device driver usb
[ 40.501486] libata version 3.00 loaded.
[ 40.501569] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 40.501897] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 40.501903] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
[ 40.501908] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 40.502437] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 40.527819] Floppy drive(s): fd0 is 1.44M
[ 40.547466] FDC 0 is a post-1991 82077
[ 41.019214] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1b:fc:db:43:c2
[ 41.019217] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
[ 41.019800] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 41.019806] ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[ 41.021186] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 41.021190] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 41.021374] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 41.021405] ehci_hcd 0000:00:0b.1: debug port 1
[ 41.021409] PCI: cache line size of 32 is not supported by device 0000:00:0b.1
[ 41.021417] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000
[ 41.035814] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 41.035895] usb usb1: configuration #1 chosen from 1 choice
[ 41.035912] hub 1-0:1.0: USB hub found
[ 41.035916] hub 1-0:1.0: 8 ports detected
[ 41.135020] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 41.135025] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21
[ 41.135719] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 41.135723] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 41.135768] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 41.135793] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfe02f000
[ 41.196630] usb usb2: configuration #1 chosen from 1 choice
[ 41.196647] hub 2-0:1.0: USB hub found
[ 41.196653] hub 2-0:1.0: 8 ports detected
[ 41.302487] ahci 0000:03:00.0: version 3.0
[ 41.302790] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 41.302795] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
[ 41.374267] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 41.507151] usb 1-1: configuration #1 chosen from 1 choice
[ 41.507575] hub 1-1:1.0: USB hub found
[ 41.507684] hub 1-1:1.0: 2 ports detected
[ 42.037182] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 42.305258] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 42.305261] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 42.305266] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 42.305680] scsi0 : ahci
[ 42.305711] ata1: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[ 42.624235] ata1: SATA link down (SStatus 0 SControl 300)
[ 42.624324] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 42.624615] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 42.624620] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 42.624635] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 42.624641] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
[ 42.624891] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 42.624893] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 42.624907] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 42.624914] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
[ 42.625310] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 42.625315] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 42.678338] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 42.683411] pata_amd 0000:00:0d.0: version 0.3.10
[ 42.683435] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 42.683515] scsi1 : pata_amd
[ 42.683561] scsi2 : pata_amd
[ 42.684046] ata2: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 42.684048] ata3: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 42.719942] usb 1-6: configuration #1 chosen from 1 choice
[ 43.011590] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 43.225422] usb 2-3: configuration #1 chosen from 1 choice
[ 43.232915] usbcore: registered new interface driver libusual
[ 43.235776] Initializing USB Mass Storage driver...
[ 43.236224] scsi3 : SCSI emulation for USB Mass Storage devices
[ 43.236555] usbcore: registered new interface driver usb-storage
[ 43.236557] USB Mass Storage support registered.
[ 43.236631] usb-storage: device found at 4
[ 43.236632] usb-storage: waiting for device to settle before scanning
[ 43.239868] usbcore: registered new interface driver hiddev
[ 43.245496] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input2
[ 43.275186] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:0b.0-3
[ 43.275196] usbcore: registered new interface driver usbhid
[ 43.275199] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 43.515045] ata3.00: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 43.515057] ata3.01: ATAPI: Optiarc DVD RW AD-7190A, 1.03, max UDMA/66
[ 43.686700] ata3.00: configured for UDMA/33
[ 43.874394] ata3.01: configured for UDMA/66
[ 43.874929] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 43.876196] scsi 2:0:1:0: CD-ROM Optiarc DVD RW AD-7190A 1.03 PQ: 0 ANSI: 5
[ 43.876248] sata_nv 0000:00:0e.0: version 3.5
[ 43.876259] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20
[ 43.877211] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 43.877264] scsi4 : sata_nv
[ 43.877426] scsi5 : sata_nv
[ 43.877553] ata4: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
[ 43.877555] ata5: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
[ 43.950153] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001611195]
[ 44.185678] ata4: SATA link down (SStatus 0 SControl 300)
[ 44.509150] ata5: SATA link down (SStatus 0 SControl 300)
[ 44.519695] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 44.520405] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 44.520461] scsi6 : sata_nv
[ 44.520649] scsi7 : sata_nv
[ 44.520777] ata6: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
[ 44.520779] ata7: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
[ 44.984383] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 44.992668] ata6.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
[ 44.992670] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 45.012643] ata6.00: configured for UDMA/133
[ 45.319825] ata7: SATA link down (SStatus 0 SControl 300)
[ 45.330418] scsi 6:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 45.335882] Driver 'sd' needs updating - please use bus_type methods
[ 45.335962] sd 6:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 45.335970] sd 6:0:0:0: [sda] Write Protect is off
[ 45.335972] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 45.335982] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.336027] sd 6:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 45.336033] sd 6:0:0:0: [sda] Write Protect is off
[ 45.336035] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 45.336047] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.336050] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 45.344165] sr0: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 45.344169] Uniform CD-ROM driver Revision: 3.20
[ 45.344207] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 45.352465] sr1: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 45.352490] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 45.358239] sda1 sda2 < sda5 >
[ 45.388668] sd 6:0:0:0: [sda] Attached SCSI disk
[ 45.391706] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 45.391720] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 45.391734] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 45.629983] Attempting manual resume
[ 45.629985] swsusp: Resume From Partition 8:5
[ 45.629986] PM: Checking swsusp image.
[ 45.630085] PM: Resume from disk failed.
[ 45.639881] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 45.639883] EXT3-fs: write access will be enabled during recovery.
[ 46.662040] kjournald starting. Commit interval 5 seconds
[ 46.662053] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 46.662059] ext3_orphan_cleanup: deleting unreferenced inode 11059238
[ 46.678964] ext3_orphan_cleanup: deleting unreferenced inode 11059218
[ 46.683464] EXT3-fs: sda1: 2 orphan inodes deleted
[ 46.683465] EXT3-fs: recovery complete.
[ 46.706027] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.227241] usb-storage: device scan complete
[ 48.234225] scsi 3:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 48.241333] scsi 3:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 48.248322] scsi 3:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 48.255187] scsi 3:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 48.259323] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 48.259345] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 48.263319] sd 3:0:0:1: [sdc] Attached SCSI removable disk
[ 48.263339] sd 3:0:0:1: Attached scsi generic sg4 type 0
[ 48.267304] sd 3:0:0:2: [sdd] Attached SCSI removable disk
[ 48.267322] sd 3:0:0:2: Attached scsi generic sg5 type 0
[ 48.271296] sd 3:0:0:3: [sde] Attached SCSI removable disk
[ 48.271315] sd 3:0:0:3: Attached scsi generic sg6 type 0
[ 52.202392] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 52.290022] parport_pc 00:0a: reported by Plug and Play ACPI
[ 52.290048] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 52.406125] input: Power Button (FF) as /devices/virtual/input/input4
[ 52.485415] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.502740] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 52.577521] ACPI: Power Button (FF) [PWRF]
[ 52.577563] input: Power Button (CM) as /devices/virtual/input/input5
[ 52.645135] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 52.645149] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80
[ 52.645616] ACPI: Power Button (CM) [PWRB]
[ 52.803159] nvidia: module license 'NVIDIA' taints kernel.
[ 53.057152] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 53.057156] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
[ 53.057164] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 53.057266] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[ 53.057269] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
[ 53.057274] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 53.057375] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
[ 53.264902] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 53.264906] ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 53.266409] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 53.732977] lp0: using parport0 (interrupt-driven).
[ 53.783208] Adding 11871992k swap on /dev/sda5. Priority:-1 extents:1 across:11871992k
[ 54.315283] EXT3 FS on sda1, internal journal
[ 55.194131] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 55.461914] No dock devices found.
[ 56.573444] ppdev: user-space parallel port driver
[ 56.701391] audit(1250333224.046:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5671 profile="/usr/sbin/cupsd" namespace="default"
[ 58.116942] Bluetooth: Core ver 2.11
[ 58.117132] NET: Registered protocol family 31
[ 58.117134] Bluetooth: HCI device and connection manager initialized
[ 58.117137] Bluetooth: HCI socket layer initialized
[ 58.121686] Bluetooth: L2CAP ver 2.9
[ 58.121689] Bluetooth: L2CAP socket layer initialized
[ 58.150717] Bluetooth: RFCOMM socket layer initialized
[ 58.150733] Bluetooth: RFCOMM TTY layer initialized
[ 58.150734] Bluetooth: RFCOMM ver 1.8
[ 61.570119] NET: Registered protocol family 17
[ 65.238164] NET: Registered protocol family 10
[ 65.238378] lo: Disabled Privacy Extensions
[ 76.084229] eth0: no IPv6 routers present
Offline
Did you get ip address from router or ISP ? Did you try only from console, or from networkmanager, wicd too ?
Offline
I get my IP from a router.
And I tried connecting via CLI with arch, and GUI with ubuntu and kubuntu.
Offline
And can you get IP or not? It isn't clean for me now.
Offline
No, when doing ifconfig, eth0 has no IP address attached to it.
Offline
Hmm, well your forcedeth driver appears to start correctly. No errors at least. How are you starting the network?
Offline
Compare the output of the following commands between a working distro and a broken distro:
ifconfig route -n cat /etc/resolv.conf
If there's no output from the first, add the -a option to it.
Are you familiar with our Forum Rules, and How To Ask Questions The Smart Way?
BlueHackers // fscanary // resticctl
Offline
Perhaps you need to acquire an IP address first. Try running `dhcpcd eth0` (assuming eth0 is the interface you use to connect to the Internet).
Offline
Working distro
ifconfig
eth0 Link encap:Ethernet HWaddr 00:1b:fc:db:43:c2
inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:fcff:fedb:43c2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:139 errors:0 dropped:0 overruns:0 frame:0
TX packets:181 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:69431 (67.8 KB) TX bytes:34977 (34.1 KB)
Interrupt:23 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1380 errors:0 dropped:0 overruns:0 frame:0
TX packets:1380 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:69000 (67.3 KB) TX bytes:69000 (67.3 KB)
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
cat /etc/resolv.conf
### BEGIN INFO
#
# Modified_by: NetworkManager
# Process: /usr/bin/NetworkManager
# Process_id: 5582
#
### END INFO
search hsd1.ma.comcast.net.
nameserver 68.87.71.230
nameserver 68.87.73.246
I'm currently DLing and going to try and install openSuse and see how that goes.
Last edited by Valok (2009-08-18 00:23:51)
Offline
Pages: 1