You are not logged in.
Hi all,
I have some problems with the auto-mounting of USB storage devices. I already installed udisks and ntfs-3g.
When I connect the external device (it's an external hard disk WD My Passport 500GB, but I have the same problem with a SanDisk USB stick 8GB) the auto-mount doesn't work. I see a shorcut in the left panel of Thunar but if I try to use it Thunar crash without any message error.
I try with the manual mount and it works, but the left panel of Thunar continue to have the same problem.
In the italian Arch forum a friend suggest me to open Thunar from bash and close it. If I do it I receive this error log:
$ thunar
thunar: symbol lookup error: /usr/lib/libstdc++.so.6: undefined symbol: _ZNSt14error_categoryD2Ev, version GLIBCXX_3.4.15
and this is the reply of dmesg command:
[ 340.826768] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 341.591397] Initializing USB Mass Storage driver...
[ 341.592166] scsi6 : usb-storage 1-1:1.0
[ 341.592345] usbcore: registered new interface driver usb-storage
[ 341.592349] USB Mass Storage support registered.
[ 341.599805] usbcore: registered new interface driver uas
[ 342.591094] scsi 6:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4
[ 342.591474] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 342.592845] scsi 6:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4
[ 342.593048] scsi 6:0:0:1: Attached scsi generic sg2 type 5
[ 342.594050] sd 6:0:0:0: [sdb] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 342.594814] scsi 6:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
[ 342.595141] scsi 6:0:0:2: Attached scsi generic sg3 type 13
[ 342.596546] sd 6:0:0:0: [sdb] Write Protect is off
[ 342.596553] sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
[ 342.596557] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 342.599163] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 342.618228] sdb: sdb1
[ 342.621039] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 342.621046] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 342.665174] sr0: scsi3-mmc drive: 51x/51x caddy
[ 342.665180] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 342.665447] sr 6:0:0:1: Attached scsi CD-ROM sr0
[ 342.665654] ses 6:0:0:2: Attached Enclosure device
[ 349.105348] [b]Thunar[996]: segfault at 0 ip b6de1660 sp bfe586f4 error 4 in libglib-2.0.so.0.2800.8[b6d6f000+ed000][/b]
Do you have any suggestion?
Thank you very much,
Gianluca
Laptop: Acer Aspire S3 | Linux Mint Cinnamon 64-bit
Offline
Any idea?
Laptop: Acer Aspire S3 | Linux Mint Cinnamon 64-bit
Offline
Do you have gvfs installed ?Thunar needs it to auto-mount.
Costum udev rules also conflict with thunar.
github - tweets
avatar: The Oathmeal
Offline
Does this help? https://wiki.archlinux.org/index.php/Autofs
Offline
udisks and helper scripts like devmon and udiskie is also another option if for some reason you do not want gvfs.
There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !
Offline
Are you using [testing]? Partially updated system?
The error looks like you have a different version of gcc-libs / glibc than the app was built against.
Last edited by Mr.Elendig (2011-06-20 19:16:33)
Evil #archlinux@libera.chat channel op and general support dude.
. files on github, Screenshots, Random pics and the rest
Offline