You are not logged in.
Pages: 1
Hello,
I am not sure what happened, but I am unable to launch X. When I type startx, I see the wallpaper set by feh (I use DWM), and after a second it disappears and I'm back to console.
To rule out problems in .xinitrc, I tried to launch X as root (no .xinitrc), and the same problem happened: almost in X for a second, then all was lost.
$ startx &> startx.log
$ cat startx.log
X.Org X Server 1.10.3
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-ARCH x86_64
Current Operating System: Linux archfm 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
Kernel command line: root=/dev/disk/by-uuid/a881a157-aeea-4bb1-9702-ab43285bf0a0 ro
Build Date: 09 July 2011 07:52:32AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 11 10:25:52 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down
(The xkbcomp warning has always been there, and has never created any problem.)
$ cat /var/log/Xorg.0.log
[ 127.043]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 127.043] X Protocol Version 11, Revision 0
[ 127.043] Build Operating System: Linux 2.6.39-ARCH x86_64
[ 127.043] Current Operating System: Linux archfm 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[ 127.043] Kernel command line: root=/dev/disk/by-uuid/a881a157-aeea-4bb1-9702-ab43285bf0a0 ro
[ 127.043] Build Date: 09 July 2011 07:52:32AM
[ 127.043]
[ 127.043] Current version of pixman: 0.22.2
[ 127.043] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 127.043] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 127.043] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 11 10:26:20 2011
[ 127.043] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 127.043] (==) No Layout section. Using the first Screen section.
[ 127.043] (**) |-->Screen "S" (0)
[ 127.043] (**) | |-->Monitor "M"
[ 127.043] (**) | |-->Device "D"
[ 127.043] (==) Automatically adding devices
[ 127.043] (==) Automatically enabling devices
[ 127.043] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 127.043] Entry deleted from font path.
[ 127.043] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 127.043] Entry deleted from font path.
[ 127.043] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 127.043] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 127.043] Entry deleted from font path.
[ 127.043] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 127.043] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 127.043] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 127.043] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 127.043] (II) Loader magic: 0x7d3440
[ 127.043] (II) Module ABI versions:
[ 127.043] X.Org ANSI C Emulation: 0.4
[ 127.043] X.Org Video Driver: 10.0
[ 127.043] X.Org XInput driver : 12.2
[ 127.043] X.Org Server Extension : 5.0
[ 127.044] (--) PCI:*(0:0:2:0) 8086:0116:103c:167d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00006000/64
[ 127.044] (--) PCI: (0:1:0:0) 1002:6760:103c:167d rev 0, Mem @ 0xb0000000/268435456, 0xd4900000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 127.044] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 127.044] (II) LoadModule: "extmod"
[ 127.044] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 127.044] (II) Module extmod: vendor="X.Org Foundation"
[ 127.044] compiled for 1.10.3, module version = 1.0.0
[ 127.044] Module class: X.Org Server Extension
[ 127.044] ABI class: X.Org Server Extension, version 5.0
[ 127.044] (II) Loading extension MIT-SCREEN-SAVER
[ 127.044] (II) Loading extension XFree86-VidModeExtension
[ 127.044] (II) Loading extension XFree86-DGA
[ 127.044] (II) Loading extension DPMS
[ 127.044] (II) Loading extension XVideo
[ 127.044] (II) Loading extension XVideo-MotionCompensation
[ 127.044] (II) Loading extension X-Resource
[ 127.044] (II) LoadModule: "dbe"
[ 127.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 127.044] (II) Module dbe: vendor="X.Org Foundation"
[ 127.044] compiled for 1.10.3, module version = 1.0.0
[ 127.044] Module class: X.Org Server Extension
[ 127.044] ABI class: X.Org Server Extension, version 5.0
[ 127.044] (II) Loading extension DOUBLE-BUFFER
[ 127.044] (II) LoadModule: "glx"
[ 127.044] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 127.044] (II) Module glx: vendor="X.Org Foundation"
[ 127.044] compiled for 1.10.3, module version = 1.0.0
[ 127.044] ABI class: X.Org Server Extension, version 5.0
[ 127.044] (==) AIGLX enabled
[ 127.044] (II) Loading extension GLX
[ 127.044] (II) LoadModule: "record"
[ 127.045] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 127.045] (II) Module record: vendor="X.Org Foundation"
[ 127.045] compiled for 1.10.3, module version = 1.13.0
[ 127.045] Module class: X.Org Server Extension
[ 127.045] ABI class: X.Org Server Extension, version 5.0
[ 127.045] (II) Loading extension RECORD
[ 127.045] (II) LoadModule: "dri"
[ 127.045] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 127.045] (II) Module dri: vendor="X.Org Foundation"
[ 127.045] compiled for 1.10.3, module version = 1.0.0
[ 127.045] ABI class: X.Org Server Extension, version 5.0
[ 127.045] (II) Loading extension XFree86-DRI
[ 127.045] (II) LoadModule: "dri2"
[ 127.045] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 127.045] (II) Module dri2: vendor="X.Org Foundation"
[ 127.045] compiled for 1.10.3, module version = 1.2.0
[ 127.045] ABI class: X.Org Server Extension, version 5.0
[ 127.045] (II) Loading extension DRI2
[ 127.045] (II) LoadModule: "intel"
[ 127.045] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 127.045] (II) Module intel: vendor="X.Org Foundation"
[ 127.045] compiled for 1.10.2, module version = 2.15.0
[ 127.045] Module class: X.Org Video Driver
[ 127.045] ABI class: X.Org Video Driver, version 10.0
[ 127.045] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 127.045] (--) using VT number 7
[ 127.049] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 127.049] drmOpenDevice: node name is /dev/dri/card0
[ 127.049] drmOpenDevice: open result is 8, (OK)
[ 127.049] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 127.049] drmOpenDevice: node name is /dev/dri/card0
[ 127.049] drmOpenDevice: open result is 8, (OK)
[ 127.049] drmOpenByBusid: drmOpenMinor returns 8
[ 127.049] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 127.049] (II) intel(0): Creating default Display subsection in Screen section
"S" for depth/fbbpp 24/32
[ 127.049] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 127.049] (==) intel(0): RGB weight 888
[ 127.049] (==) intel(0): Default visual is TrueColor
[ 127.049] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 127.049] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 127.049] (**) intel(0): Relaxed fencing enabled
[ 127.049] (**) intel(0): Framebuffer tiled
[ 127.049] (**) intel(0): Pixmaps tiled
[ 127.049] (**) intel(0): 3D buffers tiled
[ 127.049] (**) intel(0): SwapBuffers wait enabled
[ 127.049] (==) intel(0): video overlay key set to 0x101fe
[ 127.049] (II) intel(0): Output LVDS1 using monitor section M
[ 127.049] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 127.049] (II) intel(0): Output VGA1 has no monitor section
[ 127.072] (II) intel(0): Output HDMI1 has no monitor section
[ 127.074] (II) intel(0): Output DP1 has no monitor section
[ 127.074] (II) intel(0): EDID for output LVDS1
[ 127.074] (II) intel(0): Manufacturer: CMO Model: 15a1 Serial#: 0
[ 127.074] (II) intel(0): Year: 2009 Week: 53
[ 127.074] (II) intel(0): EDID Version: 1.3
[ 127.074] (II) intel(0): Digital Display Input
[ 127.074] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 127.074] (II) intel(0): Gamma: 2.20
[ 127.074] (II) intel(0): No DPMS capabilities specified
[ 127.074] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 127.074] (II) intel(0): First detailed timing is preferred mode
[ 127.074] (II) intel(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 127.074] (II) intel(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 127.074] (II) intel(0): Manufacturer's mask: 0
[ 127.074] (II) intel(0): Supported detailed timing:
[ 127.074] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 127.074] (II) intel(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 127.074] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 127.074] (II) intel(0): N156B6-L0A
[ 127.074] (II) intel(0): CMO
[ 127.074] (II) intel(0): N156B6-L0A
[ 127.074] (II) intel(0): EDID (in hex):
[ 127.074] (II) intel(0): 00ffffffffffff000dafa11500000000
[ 127.074] (II) intel(0): 35130103802313780a07f59a574e8726
[ 127.074] (II) intel(0): 1e505400000001010101010101010101
[ 127.074] (II) intel(0): 010101010101121b5664500014301022
[ 127.074] (II) intel(0): 260058c110000018000000fe004e3135
[ 127.074] (II) intel(0): 3642362d4c30410a2020000000fe0043
[ 127.074] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 127.074] (II) intel(0): 004e31353642362d4c30410a20200013
[ 127.074] (II) intel(0): EDID vendor "CMO", prod id 5537
[ 127.074] (II) intel(0): Printing DDC gathered Modelines:
[ 127.074] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 127.074] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 127.074] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 127.074] (II) intel(0): Printing probed modes for output LVDS1
[ 127.074] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 127.074] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 127.074] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 127.074] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 127.074] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 127.074] (II) intel(0): EDID for output VGA1
[ 127.097] (II) intel(0): EDID for output HDMI1
[ 127.098] (II) intel(0): EDID for output DP1
[ 127.098] (II) intel(0): Output LVDS1 connected
[ 127.098] (II) intel(0): Output VGA1 disconnected
[ 127.098] (II) intel(0): Output HDMI1 disconnected
[ 127.098] (II) intel(0): Output DP1 disconnected
[ 127.098] (II) intel(0): Using exact sizes for initial modes
[ 127.098] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 127.098] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 127.098] (II) intel(0): Kernel page flipping support detected, enabling
[ 127.098] (**) intel(0): Display dimensions: (350, 190) mm
[ 127.098] (**) intel(0): DPI set to (99, 102)
[ 127.098] (II) Loading sub module "fb"
[ 127.098] (II) LoadModule: "fb"
[ 127.099] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 127.099] (II) Module fb: vendor="X.Org Foundation"
[ 127.099] compiled for 1.10.3, module version = 1.0.0
[ 127.099] ABI class: X.Org ANSI C Emulation, version 0.4
[ 127.099] (II) Loading sub module "dri2"
[ 127.099] (II) LoadModule: "dri2"
[ 127.099] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 127.099] (II) Module dri2: vendor="X.Org Foundation"
[ 127.099] compiled for 1.10.3, module version = 1.2.0
[ 127.099] ABI class: X.Org Server Extension, version 5.0
[ 127.099] (==) Depth 24 pixmap format is 32 bpp
[ 127.099] (II) intel(0): [DRI2] Setup complete
[ 127.099] (II) intel(0): [DRI2] DRI driver: i965
[ 127.099] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 127.100] (II) UXA(0): Driver registered support for the following operations:
[ 127.100] (II) solid
[ 127.100] (II) copy
[ 127.100] (II) composite (RENDER acceleration)
[ 127.100] (II) put_image
[ 127.100] (II) get_image
[ 127.100] (==) intel(0): Backing store disabled
[ 127.100] (==) intel(0): Silken mouse enabled
[ 127.100] (II) intel(0): Initializing HW Cursor
[ 127.156] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 127.157] (==) intel(0): DPMS enabled
[ 127.157] (==) intel(0): Intel XvMC decoder enabled
[ 127.157] (II) intel(0): Set up textured video
[ 127.157] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 127.157] (II) intel(0): direct rendering: DRI2 Enabled
[ 127.157] (==) intel(0): hotplug detection: "enabled"
[ 127.157] (--) RandR disabled
[ 127.157] (II) Initializing built-in extension Generic Event Extension
[ 127.157] (II) Initializing built-in extension SHAPE
[ 127.157] (II) Initializing built-in extension MIT-SHM
[ 127.157] (II) Initializing built-in extension XInputExtension
[ 127.157] (II) Initializing built-in extension XTEST
[ 127.157] (II) Initializing built-in extension BIG-REQUESTS
[ 127.157] (II) Initializing built-in extension SYNC
[ 127.157] (II) Initializing built-in extension XKEYBOARD
[ 127.157] (II) Initializing built-in extension XC-MISC
[ 127.157] (II) Initializing built-in extension SECURITY
[ 127.157] (II) Initializing built-in extension XINERAMA
[ 127.157] (II) Initializing built-in extension XFIXES
[ 127.157] (II) Initializing built-in extension RENDER
[ 127.157] (II) Initializing built-in extension RANDR
[ 127.157] (II) Initializing built-in extension COMPOSITE
[ 127.157] (II) Initializing built-in extension DAMAGE
[ 127.163] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 127.163] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 127.163] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 127.163] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 127.163] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 127.163] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 127.163] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 127.163] (II) intel(0): Setting screen physical size to 361 x 203
[ 127.193] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 127.193] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 127.193] (II) LoadModule: "evdev"
[ 127.193] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.193] (II) Module evdev: vendor="X.Org Foundation"
[ 127.193] compiled for 1.10.0, module version = 2.6.0
[ 127.193] Module class: X.Org XInput Driver
[ 127.193] ABI class: X.Org XInput driver, version 12.2
[ 127.193] (II) Using input driver 'evdev' for 'Power Button'
[ 127.193] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.193] (**) Power Button: always reports core events
[ 127.193] (**) Power Button: Device: "/dev/input/event3"
[ 127.226] (--) Power Button: Found keys
[ 127.226] (II) Power Button: Configuring as keyboard
[ 127.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 127.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 127.226] (**) Option "xkb_rules" "evdev"
[ 127.226] (**) Option "xkb_model" "evdev"
[ 127.226] (**) Option "xkb_layout" "it"
[ 127.242] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 127.242] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 127.242] (II) Using input driver 'evdev' for 'Video Bus'
[ 127.242] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.242] (**) Video Bus: always reports core events
[ 127.242] (**) Video Bus: Device: "/dev/input/event5"
[ 127.283] (--) Video Bus: Found keys
[ 127.283] (II) Video Bus: Configuring as keyboard
[ 127.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 127.283] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 127.283] (**) Option "xkb_rules" "evdev"
[ 127.283] (**) Option "xkb_model" "evdev"
[ 127.283] (**) Option "xkb_layout" "it"
[ 127.284] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 127.284] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 127.284] (II) Using input driver 'evdev' for 'Video Bus'
[ 127.284] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.284] (**) Video Bus: always reports core events
[ 127.284] (**) Video Bus: Device: "/dev/input/event4"
[ 127.310] (--) Video Bus: Found keys
[ 127.310] (II) Video Bus: Configuring as keyboard
[ 127.310] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4"
[ 127.310] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 127.310] (**) Option "xkb_rules" "evdev"
[ 127.310] (**) Option "xkb_model" "evdev"
[ 127.310] (**) Option "xkb_layout" "it"
[ 127.312] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 127.312] (II) No input driver/identifier specified (ignoring)
[ 127.312] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 127.312] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 127.312] (II) Using input driver 'evdev' for 'Sleep Button'
[ 127.312] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.312] (**) Sleep Button: always reports core events
[ 127.312] (**) Sleep Button: Device: "/dev/input/event1"
[ 127.336] (--) Sleep Button: Found keys
[ 127.336] (II) Sleep Button: Configuring as keyboard
[ 127.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 127.336] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 127.336] (**) Option "xkb_rules" "evdev"
[ 127.336] (**) Option "xkb_model" "evdev"
[ 127.336] (**) Option "xkb_layout" "it"
[ 127.339] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 127.339] (II) No input driver/identifier specified (ignoring)
[ 127.339] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Front Jack (/dev/input/event10)
[ 127.339] (II) No input driver/identifier specified (ignoring)
[ 127.339] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Front Jack (/dev/input/event11)
[ 127.339] (II) No input driver/identifier specified (ignoring)
[ 127.341] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event13)
[ 127.341] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 127.341] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 127.341] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.341] (**) HP HD Webcam [Fixed]: always reports core events
[ 127.341] (**) HP HD Webcam [Fixed]: Device: "/dev/input/event13"
[ 127.360] (--) HP HD Webcam [Fixed]: Found keys
[ 127.360] (II) HP HD Webcam [Fixed]: Configuring as keyboard
[ 127.360] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input13/event13"
[ 127.360] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD)
[ 127.360] (**) Option "xkb_rules" "evdev"
[ 127.360] (**) Option "xkb_model" "evdev"
[ 127.360] (**) Option "xkb_layout" "it"
[ 127.362] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 127.362] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 127.362] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 127.362] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.362] (**) AT Translated Set 2 keyboard: always reports core events
[ 127.362] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 127.386] (--) AT Translated Set 2 keyboard: Found keys
[ 127.386] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 127.386] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 127.386] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 127.386] (**) Option "xkb_rules" "evdev"
[ 127.386] (**) Option "xkb_model" "evdev"
[ 127.386] (**) Option "xkb_layout" "it"
[ 127.387] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 127.387] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 127.387] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 127.387] (II) LoadModule: "synaptics"
[ 127.387] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 127.387] (II) Module synaptics: vendor="X.Org Foundation"
[ 127.387] compiled for 1.10.2, module version = 1.4.1
[ 127.387] Module class: X.Org XInput Driver
[ 127.387] ABI class: X.Org XInput driver, version 12.2
[ 127.387] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 127.387] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 127.387] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 127.387] (**) Option "Device" "/dev/input/event7"
[ 127.520] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5756
[ 127.520] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4876
[ 127.520] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 127.520] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 127.520] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 127.520] (**) Option "TapButton1" "1"
[ 127.520] (**) Option "TapButton2" "2"
[ 127.520] (**) Option "TapButton3" "3"
[ 127.626] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 127.626] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 127.693] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[ 127.693] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 127.693] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 127.693] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 127.693] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 127.693] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 127.693] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 127.693] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 127.693] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 127.773] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 127.773] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 127.773] (II) No input driver/identifier specified (ignoring)
[ 127.773] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event12)
[ 127.773] (II) No input driver/identifier specified (ignoring)
[ 127.774] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 127.774] (II) No input driver/identifier specified (ignoring)
[ 127.774] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 127.774] (II) No input driver/identifier specified (ignoring)
[ 127.775] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[ 127.775] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 127.775] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 127.775] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.775] (**) HP WMI hotkeys: always reports core events
[ 127.775] (**) HP WMI hotkeys: Device: "/dev/input/event8"
[ 127.800] (--) HP WMI hotkeys: Found keys
[ 127.800] (II) HP WMI hotkeys: Configuring as keyboard
[ 127.800] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 127.800] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 127.800] (**) Option "xkb_rules" "evdev"
[ 127.800] (**) Option "xkb_model" "evdev"
[ 127.800] (**) Option "xkb_layout" "it"
[ 127.818] (II) intel(0): EDID vendor "CMO", prod id 5537
[ 127.818] (II) intel(0): Printing DDC gathered Modelines:
[ 127.818] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 128.966] (II) Power Button: Close
[ 128.966] (II) UnloadModule: "evdev"
[ 128.966] (II) Unloading evdev
[ 129.006] (II) Video Bus: Close
[ 129.006] (II) UnloadModule: "evdev"
[ 129.006] (II) Unloading evdev
[ 129.060] (II) Video Bus: Close
[ 129.060] (II) UnloadModule: "evdev"
[ 129.060] (II) Unloading evdev
[ 129.103] (II) Sleep Button: Close
[ 129.103] (II) UnloadModule: "evdev"
[ 129.103] (II) Unloading evdev
[ 129.156] (II) HP HD Webcam [Fixed]: Close
[ 129.156] (II) UnloadModule: "evdev"
[ 129.156] (II) Unloading evdev
[ 129.210] (II) AT Translated Set 2 keyboard: Close
[ 129.210] (II) UnloadModule: "evdev"
[ 129.210] (II) Unloading evdev
[ 129.330] (II) UnloadModule: "synaptics"
[ 129.330] (II) Unloading synaptics
[ 129.383] (II) HP WMI hotkeys: Close
[ 129.383] (II) UnloadModule: "evdev"
[ 129.383] (II) Unloading evdev
$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b4)
00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M]
24:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
24:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30)
24:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30)
25:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
26:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
I do not have an xorg.conf: before today I did not have the need as things worked.
I'm using the 2.6.39.3-1 kernel.
Recent pacman activity was this:
[2011-07-10 15:32] upgraded kernel26 (2.6.39.2-1 -> 2.6.39.3-1)
[2011-07-10 15:32] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
[2011-07-10 15:32] upgraded tzdata (2011g-1 -> 2011h-1)
[2011-07-10 15:32] upgraded xorg-server-common (1.10.2-1 -> 1.10.3-1)
[2011-07-10 15:32] upgraded xorg-server (1.10.2-1 -> 1.10.3-1)
I've downgraded to the previous version of xorg-server and xorg-server-common, but nothing changed.
I'd be grateful if someone could shed some light!
Last edited by One (2011-07-11 14:38:25)
First time Archer
Offline
Can you post your .xinitrc ?
Offline
Here it is, but I must point out that even as root I had the same problem, and root uses the default xinitrc provided by xorg.
#!/bin/bash
##----------- start apps
#mpd ~/.mpd.conf &
xbindkeys &
sh ~/bin/mysynaptics.sh &
thunar --daemon &
urxvtd &
xset -b &
xbacklight -set 80 &
##----------- set background
feh --bg-fill ~/Pictures/Wallpapers/Clouds\ Wallpaper/Clouds.png
##----------- start dwm
while true
do
xsetroot -name "$(perl ~/bin/status.pl)"
sleep 30
done &
exec ck-launch-session dbus-launch dwm
First time Archer
Offline
well, things you could try if not already done:
1. try with only dwm in .xinitrc (and redirect dwm output in a file, just in case something interesting would be in the output)
2. try with another window manager e.g. openbox
3. recompile dwm
Offline
Thank you dobedo.
With only dwm in .xinitrc I get the same problem, and no output at all to help.
Recompiling dwm did not help either.
I installed xfce, and that did work, although the xcursor did not show.
So the problem must lie in dwm, right?
First time Archer
Offline
Looks like.
I'm not using dwm but for what I remembered in the past, its config is built in the code.
What you could try (if not already done):
1. the new version of dwm 5.9 posted yesterday in the suckless.org site ; without your config (in case it's a problem somewhere in your config)
2. if it works then the new version with your config
... if it doesn't work...mmmh, don't know.
Offline
I've tried 5.9 but nothing changes.
All dwm is saying is that some fontsets are missing, but that should not matter.
Last edited by One (2011-07-11 14:38:01)
First time Archer
Offline
Have you tried rebooting?
This silver ladybug at line 28...
Offline
Rebooting? Why would that matter? :s
First time Archer
Offline
Well, you have to reboot after a kernel update anyway.
Have you tried that or not?
This silver ladybug at line 28...
Offline
Oh yes, I've rebooted after the kernel update.
First time Archer
Offline
I think I can rule out DWM as the cause of the problem. I've uninstalled dwm and with no xinitrc I launched startx, expecting to get the basic screen with some xterms and the xclock. Instead, the problem persists: The connection to the X server is lost, and X is shut down.
With this lack of error messages I really don't know where to look.
[edit]
At the same time, XFCE does start up. It acts really wierdly though: no cursor, it does not find any apps (not even thunar, which is installed), and whenever I try to launch something the screen flashes black and nothing else happens. WTF?!
Last edited by One (2011-07-11 22:55:17)
First time Archer
Offline
If xfce & dwm doesn't work properly, might be linked to X and/or the driver.
Try to downgrade everything from the last -Syu
Offline
Looking at the log, there is something odd with your fonts: it does not find basic fonts in /usr/share/fonts/100dpi. This can be a problem with dwm (which can not display its bar) and with many other window managers which need fonts for various reasons. Are the packages xorg-fonts-100dpi and xorg-fonts-75 dpi installed? Also if they are installed try to reinstall them with pacman.
Mortuus in anima, curam gero cutis
Offline
Pages: 1