Arch Linux

Archelien

Member

Registered: 2011-08-24

Posts: 10

CD audio issue

Hello,

I cannot read audio cd with my up-to-date Archlinux:
- kernel x64
- optical drive: TSSTcorp CDDVDW SH

Optical drive works (works well on a windows setup)
No problems when reading DVDs
Not a end user software problem (vlc works for dvd, not for cdaudios)
Not a problem linked to a bad cdaudio (all cdaudios fail, tested ok on other computers)
My user is in "optical" group

Reading CDaudio takes a lot of time and then I'm getting those messages in dmseg:

[ 1131.359971] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1131.359976] ata3.00: failed command: IDENTIFY PACKET DEVICE
[ 1131.359980] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 1131.359981]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 1131.359983] ata3.00: status: { DRDY }
[ 1131.359987] ata3: hard resetting link
[ 1131.846636] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1131.848332] ata3.00: configured for UDMA/100
[ 1131.863314] ata3: EH complete
[ 1131.918003] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1131.918008] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1131.918011] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1131.918014] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1131.918020] end_request: I/O error, dev sr0, sector 64
[ 1131.918023] Buffer I/O error on device sr0, logical block 8
[ 1131.919708] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1131.919711] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1131.919715] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1131.919717] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1131.919722] end_request: I/O error, dev sr0, sector 64
[ 1131.919725] Buffer I/O error on device sr0, logical block 8
[ 1162.399963] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1162.399968] ata3.00: failed command: IDENTIFY PACKET DEVICE
[ 1162.399973] ata3.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 1162.399974]          res 40/00:03:00:00:10/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 1162.399976] ata3.00: status: { DRDY }
[ 1162.399979] ata3: hard resetting link
[ 1162.886636] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1162.888784] ata3.00: configured for UDMA/100
[ 1162.903302] ata3: EH complete
[ 1162.942615] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1162.942619] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1162.942622] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1162.942625] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1162.942630] end_request: I/O error, dev sr0, sector 64
[ 1162.942633] Buffer I/O error on device sr0, logical block 8
[ 1162.946645] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1162.946649] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1162.946652] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1162.946654] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1162.946659] end_request: I/O error, dev sr0, sector 64
[ 1162.946661] Buffer I/O error on device sr0, logical block 8
[ 1162.977397] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1162.977401] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1162.977403] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1162.977405] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1162.977409] end_request: I/O error, dev sr0, sector 64
[ 1162.977412] Buffer I/O error on device sr0, logical block 8
[ 1163.006637] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.006640] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.006642] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.006644] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.006649] end_request: I/O error, dev sr0, sector 64
[ 1163.006651] Buffer I/O error on device sr0, logical block 8
[ 1163.034645] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.034648] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.034651] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.034653] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.034658] end_request: I/O error, dev sr0, sector 64
[ 1163.034660] Buffer I/O error on device sr0, logical block 8
[ 1163.037379] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.037382] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.037385] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.037387] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.037391] end_request: I/O error, dev sr0, sector 64
[ 1163.037393] Buffer I/O error on device sr0, logical block 8
[ 1163.063351] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.063354] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.063357] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.063359] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.063363] end_request: I/O error, dev sr0, sector 64
[ 1163.063365] Buffer I/O error on device sr0, logical block 8
[ 1163.090630] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.090633] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.090635] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.090637] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.090641] end_request: I/O error, dev sr0, sector 64
[ 1163.090643] Buffer I/O error on device sr0, logical block 8
[ 1163.116406] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.116409] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.116411] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.116413] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.116416] end_request: I/O error, dev sr0, sector 64
[ 1163.116419] Buffer I/O error on device sr0, logical block 8
[ 1163.143366] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.143370] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.143373] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.143375] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.143381] end_request: I/O error, dev sr0, sector 64
[ 1163.143384] Buffer I/O error on device sr0, logical block 8
[ 1163.145350] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.145353] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.145355] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.145357] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.145361] end_request: I/O error, dev sr0, sector 64
[ 1163.172385] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.172389] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.172392] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.172394] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.172398] end_request: I/O error, dev sr0, sector 64
[ 1163.176429] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.176433] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.176435] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.176437] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.176442] end_request: I/O error, dev sr0, sector 64
[ 1163.202587] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[ 1163.202590] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[ 1163.202592] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[ 1163.202593] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[ 1163.202597] end_request: I/O error, dev sr0, sector 64

Have you any idea on how to correct it?

Thanks !

Have a nice day

Last edited by Archelien (2011-08-24 16:23:23)

Inxsible

Forum Fellow

From: Chicago

Registered: 2008-06-09

Posts: 9,183

Re: CD audio issue

please use BBCode [code ] tags when pasting output !!!

---

Forum Rules

There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots !

Archelien

Member

Registered: 2011-08-24

Posts: 10

Re: CD audio issue

Done, sorry for that.

Archelien

Member

Registered: 2011-08-24

Posts: 10

Re: CD audio issue

It seems there is no quick fix applicable.

When I boot, I have the same kind of error messages - maybe it can help?

.:B:.

Forum Fellow

Registered: 2006-11-26

Posts: 5,819

Website

Re: CD audio issue

IO errors usually mean bad hardware - here a bad medium. You should check if you have similar behaviour with other CD's. The fact it works well on Windows is no guarantee, Windows might well be hiding the errors or have a different/better autocorrection mechanism.

---

Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy

Archelien

Member

Registered: 2011-08-24

Posts: 10

Re: CD audio issue

Hello .:B:.,

I confirm all the audio CDs fail on my system.

mandog

Member

From: Peru

Registered: 2008-09-17

Posts: 218

Re: CD audio issue

I cannot read audio cd with my up-to-date Archlinux:
- kernel x64
- optical drive: TSSTcorp CDDVDW SH

Optical drive works (works well on a windows setup)
No problems when reading DVDs
Not a end user software problem (vlc works for dvd, not for cdaudios)
Not a problem linked to a bad cdaudio (all cdaudios fail, tested ok on other computers)
My user is in "optical" group

Reading CDaudio takes a lot of time and then I'm getting those messages in dmseg:

You need your user in group audio to play CDs.

---

I'm dyslexic Please do not complain about puntuation or spelling and remember most dyslexic people have above average iq.

Archelien

Member

Registered: 2011-08-24

Posts: 10

Re: CD audio issue

I just checked, I'm already in audio group.

azleifel

Member

Registered: 2007-10-28

Posts: 486

Re: CD audio issue

TSSTcorp CDDVDW SH-S223C?  I've got one of those and it's a bit of a pain to get it working properly.  The first workaround for the long startup time and the "failed command: IDENTIFY PACKET DEVICE" errors is to comment out the following rule in /lib/udev/rules.d/60-persistent-storage.rules:

# ATA/ATAPI devices (SPC-3 or later) using the "scsi" subsystem
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $tempnode"

(a tip I found at http://paulphilippov.com).  If the errors disappear but the drive is configured for PI04 (slooow) at boot - check dmesg - then the next step is to add

options libata atapi_passthru16=0 force=5:udma5

to /etc/modprobe.d/modprobe.conf, add

FILES="/etc/modprobe.d/modprobe.conf"

to /etc/mkinitcpio.conf, rebuild the kernel image with mkinitcpio and reboot.

Archelien

Member

Registered: 2011-08-24

Posts: 10

Re: CD audio issue

Thank you for you answer.

Your solution removes all startup errors I had before (causing a very loooooooooong startup), but I still get those kind of errors when I insert an audio cd:

[   72.659663] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[   72.659667] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[   72.659670] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[   72.659673] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[   72.659678] end_request: I/O error, dev sr0, sector 64
[   72.661385] sr 2:0:0:0: [sr0]  Result: hostbyte=0x00 driverbyte=0x08
[   72.661389] sr 2:0:0:0: [sr0]  Sense Key : 0x5 [current] 
[   72.661391] sr 2:0:0:0: [sr0]  ASC=0x64 ASCQ=0x0
[   72.661393] sr 2:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 10 00 00 02 00
[   72.661397] end_request: I/O error, dev sr0, sector 64

azleifel

Member

Registered: 2007-10-28

Posts: 486

Re: CD audio issue

Can you boot from the drive, i.e. with a live CD?