You are not logged in.

#1 2024-03-08 19:16:46

user11
Member
Registered: 2023-10-19
Posts: 58

Internet, sometimes, not working after sleep.

Both wifi and ethernet ceases to work in random instances of returning after sleep and I have to reboot to work again.

Here's the output of "systemctl status NetworkManager"

● NetworkManager.service - Network Manager
     Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled; preset: disabled)
     Active: active (running) since Thu 2024-03-07 10:18:43 -03; 1 day 5h ago
       Docs: man:NetworkManager(8)
   Main PID: 444 (NetworkManager)
      Tasks: 4 (limit: 9160)
     Memory: 38.2M (peak: 39.5M)
        CPU: 2min 196ms
     CGroup: /system.slice/NetworkManager.service
             └─444 /usr/bin/NetworkManager --no-daemon

Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.3989] device (wlo1): state change: deactivating -> disconnected (reason 'sleeping', sys-iface-state: 'managed')
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.3992] dhcp4 (wlo1): canceled DHCP transaction
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.3992] dhcp4 (wlo1): activation: beginning transaction (timeout in 45 seconds)
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.3992] dhcp4 (wlo1): state changed no lease
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.3993] dhcp6 (wlo1): canceled DHCP transaction
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.3993] dhcp6 (wlo1): activation: beginning transaction (timeout in 45 seconds)
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.3993] dhcp6 (wlo1): state changed no lease
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.4146] device (wlo1): set-hw-addr: set MAC address to xx:xx:xx:xx:xx:xx (scanning)
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.4361] device (wlo1): state change: disconnected -> unmanaged (reason 'sleeping', sys-iface-state: 'managed')
Mar 08 05:58:16 host NetworkManager[444]: <info>  [1709888296.5643] device (wlo1): set-hw-addr: reset MAC address to xx:xx:xx:xx:xx:xx (unmanage)

Thanks.

Offline

#2 2024-03-08 21:59:59

seth
Member
Registered: 2012-09-03
Posts: 58,291

Re: Internet, sometimes, not working after sleep.

The NM status isn't really useful, please post your complete system journal for the boot covering the incident, eg

sudo journalctl -b -1 | curl -F 'file=@-' 0x0.st

for the previous one.

Offline

#3 2024-03-09 00:41:08

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

Offline

#4 2024-03-09 09:25:08

seth
Member
Registered: 2012-09-03
Posts: 58,291

Re: Internet, sometimes, not working after sleep.

Mar 07 10:18:51 host NetworkManager[444]: <info>  [1709817531.3514] manager: NetworkManager state is now CONNECTED_GLOBAL
Mar 07 12:06:14 host systemd[1]: Reached target Sleep.
Mar 07 14:03:25 host systemd[1]: Stopped target Sleep.
Mar 07 14:03:32 host NetworkManager[444]: <info>  [1709831012.7394] manager: NetworkManager state is now CONNECTED_GLOBAL
Mar 07 17:19:30 host systemd[1]: Reached target Sleep.
Mar 07 18:23:33 host systemd[1]: Stopped target Sleep.
Mar 07 18:23:41 host NetworkManager[444]: <info>  [1709846621.9889] manager: NetworkManager state is now CONNECTED_GLOBAL
Mar 07 18:55:49 host systemd[1]: Reached target Sleep.
Mar 07 19:53:26 host systemd[1]: Stopped target Sleep.
Mar 07 19:53:31 host NetworkManager[444]: <info>  [1709852011.9353] manager: NetworkManager state is now CONNECTED_GLOBAL
Mar 07 20:55:21 host systemd[1]: Reached target Sleep.
Mar 08 04:58:29 host systemd[1]: Stopped target Sleep.
Mar 08 04:58:36 host NetworkManager[444]: <info>  [1709884716.3021] manager: NetworkManager state is now CONNECTED_GLOBAL
Mar 08 05:58:16 host systemd[1]: Reached target Sleep.
Mar 08 15:23:39 host systemd[1]: Stopped target Sleep.wlo1

The only case where you don't reach a global connection is at 15:23:39, correct?
(You afterward get a bunch of network failures and ultimately shut down)

Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Watchdog timeout (limit 3min)!
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Killing process 448 (systemd-logind) with signal SIGABRT.
Mar 08 15:23:39 host kernel: Core dump to |/usr/lib/systemd/systemd-coredump pipe failed
Mar 08 15:23:39 host kernel: Core dump to |/usr/lib/systemd/systemd-coredump pipe failed
…
Mar 08 15:23:39 host systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
Mar 08 15:23:39 host systemd[1]: systemd-journald.service: Main process exited, code=killed, status=6/ABRT
Mar 08 15:23:39 host systemd[1]: systemd-journald.service: Failed with result 'watchdog'.
Mar 08 15:23:39 host systemd[1]: systemd-journald.service: Consumed 1.284s CPU time.
Mar 08 15:23:39 host systemd[1]: systemd-machined.service: Main process exited, code=killed, status=6/ABRT
Mar 08 15:23:39 host systemd[1]: systemd-machined.service: Failed with result 'watchdog'.
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Main process exited, code=killed, status=6/ABRT
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Failed with result 'watchdog'.
Mar 08 15:23:39 host systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 1.

So the problem looks like

Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Watchdog timeout (limit 3min)!
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Killing process 448 (systemd-logind) with signal SIGABRT.
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Main process exited, code=killed, status=6/ABRT
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Failed with result 'watchdog'.
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 1.
Mar 08 15:23:39 host systemd-logind[1166468]: New seat seat0.

Does a re-login (in doubt restart the DM) instead of a reboot suffice?
Does restarting NM?

As for the cause, check the logind service status and https://wiki.archlinux.org/title/Core_d … _core_dump
Wild guess:

Mar 07 10:20:11 host systemd[1]: Dependency failed for /HDD.
Mar 07 10:21:00 host CROND[6207]: (user) CMDOUT (/home/user/.local/bin/custom/sync-home: line 2: mountpoint -q /HDD: No such file or directory)

Disable that?

Offline

#5 2024-03-09 22:18:51

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

Wild guess:

Mar 07 10:20:11 host systemd[1]: Dependency failed for /HDD.
Mar 07 10:21:00 host CROND[6207]: (user) CMDOUT (/home/user/.local/bin/custom/sync-home: line 2: mountpoint -q /HDD: No such file or directory)

Disable that?

"/home/user/.local/bin/custom/sync-home" is a script that executes "rsync -av --delete /home/user/ /HDD/sync-home/" whenever "/HDD" is a mount point. I defined a cronjob to execute this file every 1 hour.

In the last weeks I didn't have "/HDD" as a mount point, but it's still an existing directory, so "mountpoint -q /HDD: No such file or directory" is strange.

By disabling it, you mean removing this cronjob?

Offline

#6 2024-03-09 22:26:24

seth
Member
Registered: 2012-09-03
Posts: 58,291

Re: Internet, sometimes, not working after sleep.

Yes.
Also systemd still tries to mount /HDD, so there's probably an fstab entry.

Otherwise, do the coredumps reveal why logind aborts?

There were a bunch of threads about weird time shifts (rtc and/or system) after suspends, did/can you notice anything like that?
("sudo hwclock" and "date" and a clock on your wall)

Offline

#7 2024-03-11 21:26:12

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

Also systemd still tries to mount /HDD, so there's probably an fstab entry.

I removed both fstab's entry and the cronjob now. I'll wait to see whether the problem returns.

There were a bunch of threads about weird time shifts (rtc and/or system) after suspends, did/can you notice anything like that?

Never noticed.

I have an external HDD for backup, I was using the fstab and cronjob+script for this purpose, you know of an alternative way to do this?

Offline

#8 2024-03-11 21:48:30

seth
Member
Registered: 2012-09-03
Posts: 58,291

Re: Internet, sometimes, not working after sleep.

udev rule that triggers the backup when you plug the HDD? (maybe after asking back first)

Offline

#9 2024-03-13 22:55:47

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

My post turned from "bug in internet network" to something quite different.

After what you said I tried messing with udev, but it wasn't working right and I'd be missing some consistency due to my lack of knowledge; I decided to do the following:

AUTO-MOUNT PART

1-Install

pacman -S udisks2 udiskie

2-Create the file "/etc/systemd/user/udiskie.service" with the following content:

[Unit]
Description=Handle automounting

[Service]
Type=simple
ExecStart=/usr/bin/udiskie

[Install]
WantedBy=default.target

3 - Do

systemctl --user enable udiskie

The devices you plug in the usb still will then all be mounted automatically

4 - I have two specific scripts (which I don't know the original source) that I had to edit to work with udiskie, make sure to have "dmenu" and "simple-mtpfs" (if you plan to mount android devices):

4.1 - mounter: Open "dmenu" to choose available devices to mount

#!/bin/bash

# Mounts Android Phones and USB drives (encrypted or not). This script will
# replace the older `dmenumount` which had extra steps and couldn't handle
# encrypted drives.
# TODO: Try decrypt for drives in crtypttab
# TODO: Add some support for connecting iPhones (although they are annoying).

IFS='
'
# Function for escaping cell-phone names.
escape(){ echo "$@" | iconv -cf UTF-8 -t ASCII//TRANSLIT | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g" ;}

# Check for phones.
phones="$(simple-mtpfs -l 2>/dev/null | sed "s/^/?/")"
mountedphones="$(grep "simple-mtpfs" /etc/mtab)"
# If there are already mounted phones, remove them from the list of mountables.
[ -n "$mountedphones" ] && phones="$(for phone in $phones; do
	for mounted in $mountedphones; do
		escphone="$(escape "$phone")"
		[[ "$mounted" =~ "$escphone" ]] && break 1
	done && continue 1
	echo "$phone"
done)"

# Check for drives.
lsblkoutput="$(lsblk -rpo "uuid,name,type,size,label,mountpoint,fstype")"
# Get all LUKS drives
allluks="$(echo "$lsblkoutput" | grep crypto_LUKS)"
# Get a list of the LUKS drive UUIDs already decrypted.
decrypted="$(find /dev/disk/by-id/dm-uuid-CRYPT-LUKS2-* | sed "s|.*LUKS2-||;s|-.*||")"
# Functioning for formatting drives correctly for dmenu:
filter() { sed "s/ /:/g" | awk -F':' '$7==""{printf "%s%s (%s) → %s\n",$1,$3,$5,$6}' | sed 's/\\x20/ /g' ; }

# Get only LUKS drives that are not decrypted.
unopenedluks="$(for drive in $allluks; do
	uuid="${drive%% *}"
	uuid="${uuid//-}"	# This is a bashism.
	[ -n "$decrypted" ] && for open in $decrypted; do
		[ "$uuid" = "$open" ] && break 1
	done && continue 1
	echo "? $drive"
done | filter)"

# Get all normal, non-encrypted or decrypted partitions that are not mounted.
normalparts="$(echo "$lsblkoutput"| grep -v crypto_LUKS | grep 'part\|rom\|crypt' | sed "s/^/? /" | filter )"

# Add all to one variable. If no mountable drives found, exit.
alldrives="$(echo "$phones
$unopenedluks
$normalparts" | sed "/^$/d;s/ *$//")"

# Quit the script if a sequential command fails.
set -e

test -n "$alldrives"

# Feed all found drives to dmenu and get user choice.
chosen="$(echo "$alldrives" | dmenu -p "Mount which drive?" -i)"

# Function for prompting user for a mountpoint.
getmount(){
	mp="$(find /media/ -type d 2>/dev/null | dmenu -i -p "Mount this drive where?")"
	test -n "$mp"
	if [ ! -d "$mp" ]; then
		mkdiryn=$(printf "No\\nYes" | dmenu -i -p "$mp does not exist. Create it?")
		[ "$mkdiryn" = "Yes" ] && (mkdir -p "$mp" || sudo -A mkdir -p "$mp")
	fi
}

attemptmount(){
		# Attempt to mount without a mountpoint, to see if drive is in fstab.
		sudo -A udiskie-mount "$chosen" || return 1
		# notify-send "?Drive Mounted." "$chosen mounted."
		exit
}

case "$chosen" in
	?*)
		chosen="${chosen%% *}"
		chosen="${chosen:1}"	# This is a bashism.
		attemptmount || getmount
    sudo -A udiskie-mount "$chosen"
		# sudo -A mount "$chosen" "$mp" -o uid="$(id -u)",gid="$(id -g)"
		# notify-send "?Drive Mounted." "$chosen mounted to $mp."
		;;

	?*)
		chosen="${chosen%% *}"
		chosen="${chosen:1}"	# This is a bashism.
		# Number the drive.
		while true; do
			[ -f "/dev/mapper/usb$num" ] || break
			num="$(printf "%02d" "$((num +1))")"
		done

		# Decrypt in a terminal window
		${TERMINAL:-st} -n floatterm -g 60x1 -e sudo cryptsetup open "$chosen" "usb$num"
		# Check if now decrypted.
		test -b "/dev/mapper/usb$num"

		attemptmount || getmount
    sudo -A udiskie-mount "$chosen"
		# sudo -A mount "/dev/mapper/usb$num" "$mp" -o uid="$(id -u)",gid="$(id -g)"
		# notify-send "?Decrypted drive Mounted." "$chosen decrypted and mounted to $mp."
		;;

	?*)
		notify-send "❗Note" "Remember to allow file access on your phone now."
		getmount
		number="${chosen%%:*}"
		number="${chosen:1}"	# This is a bashism.
		sudo -A simple-mtpfs -o allow_other -o fsname="simple-mtpfs-$(escape "$chosen")" --device "$number" "$mp"
		# notify-send "? Android Mounted." "Android device mounted to $mp."
		notify-send "Android Mounted." "Android device mounted to $mp."
		;;
esac

4.2 - umounter: Open "dmenu" to choose available devices to umount

#!/bin/sh

# Unmount USB drives or Android phones. Replaces the older `dmenuumount`. Fewer
# prompt and also de-decrypts LUKS drives that are unmounted.

set -e

mounteddroids="$(grep simple-mtpfs /etc/mtab | awk '{print "" $2}')"
lsblkoutput="$(lsblk -nrpo "name,type,size,mountpoint")"
mounteddrives="$(echo "$lsblkoutput" | awk '($2=="part"||$2="crypt")&&$4!~/\/boot|\/var\/log|\/home$|SWAP/&&length($4)>1{printf "%s (%s) → %s\n",$1,$3,$4}' | sed 's/\\x20/ /g')"

allunmountable="$(echo "$mounteddroids
$mounteddrives" | sed "/^$/d;s/ *$//")"
test -n "$allunmountable"

chosen="$(echo "$allunmountable" | dmenu -i -p "Unmount which drive?")"
chosen="${chosen%% *}"
test -n "$chosen"

abc="$(echo "$chosen" | sed 's/://')"
sudo -A udiskie-umount "$abc"
# notify-send "Device unmounted." "$chosen has been unmounted."

# Close the chosen drive if decrypted.
cryptid="$(echo "$lsblkoutput" | grep "/${chosen#*/}$")"
cryptid="${cryptid%% *}"
test -b /dev/mapper/"${cryptid##*/}"
sudo -A cryptsetup close "$cryptid"
# notify-send "?Device dencryption closed." "Drive is now securely locked again."

5 - I went to "/etc/fstab" and wrote a line:

UUID=<my-device-uuid>	/HDD/	btrfs	defaults,noauto	0 0

The "noauto" avoid my device to be mounted automatically on boot, and specifying the /HDD/ directory makes it getting mount in that directory by default, while the other mounts get mounted in a distinct directory.

6 - create the file "/etc/udev/rules.d/99-udisks2.rules" with the following content:

ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{UDISKS_FILESYSTEM_SHARED}="1"

This is to make the devices not specified in "/etc/fstab" to get all mounted in "/media/" rather than "/run/media/<your-user>"

BACK-UP PART

1 - I judge as an advice: you can set two distinct backup schedules at the same time:

1.1 - For the whole system in general, which will be large.

1.2 - For the things that considerably changes more frequently than others (in my case, it's less than 130mb), to avoid losing progress in what you work on for any unusual reason.

I have two backup schedules: one for the whole system in general, that runs each 2 days; and another for all the non-directories and selected directories of my home directory, that runs each 15min.

2 - Install

pacman -S restic

3 - You can then follow https://wiki.archlinux.org/title/Restic#Scheduling; unfortunately, I don't have much time to make a nice guide of everything here.

Offline

#10 2024-03-17 14:48:31

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

It has returned, now I see that I have to manually restart NetworkManager.service for it to work again.
Also, the custom "udiskie" service I have also stops working and I have to restart it manually for it to work again.
The udiskie service is the following:

[Unit]
Description=Handle automounting

[Service]
Type=simple
ExecStart=/usr/bin/udiskie

[Install]
WantedBy=default.target

Offline

#11 2024-03-17 15:24:30

seth
Member
Registered: 2012-09-03
Posts: 58,291

Re: Internet, sometimes, not working after sleep.

The ultimate problem is going to remain

Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Watchdog timeout (limit 3min)!
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Killing process 448 (systemd-logind) with signal SIGABRT.
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Main process exited, code=killed, status=6/ABRT
Mar 08 15:23:39 host systemd[1]: systemd-logind.service: Failed with result 'watchdog'.

(shows up in your recent logs?)

The hope was that this was caused by the "sync-home" cronjob, but apparently it's not.
Maybe the (now cleaner) log can hint at the abort.

seth wrote:

https://wiki.archlinux.org/title/Core_d … _core_dump

Otherwise, do the coredumps reveal why logind aborts?

Offline

#12 2024-03-17 17:24:28

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

shows up in your recent logs?

Mar 17 11:27:45 host systemd[1]: systemd-logind.service: Main process exited, code=killed, status=6/ABRT
Mar 17 11:27:45 host systemd[1]: systemd-logind.service: Failed with result 'watchdog'.
Mar 17 11:27:45 host systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 1.
Mar 17 11:27:45 host systemd[1]: systemd-logind.service: Watchdog timeout (limit 3min)!
Mar 17 11:27:45 host systemd[1]: systemd-logind.service: Killing process 459 (systemd-logind) with signal SIGABRT.

Otherwise, do the coredumps reveal why logind aborts?

Although the coredumps show the timestamp as being 1 week 3 days ago (maybe it didn't update yet?).

[user@host ~]$ sudo coredumpctl debug /usr/lib/systemd/systemd-logind
           PID: 460 (systemd-logind)
           UID: 0 (root)
           GID: 0 (root)
        Signal: 6 (ABRT)
     Timestamp: Thu 2024-03-07 10:02:36 -03 (1 week 3 days ago)
  Command Line: /usr/lib/systemd/systemd-logind
    Executable: /usr/lib/systemd/systemd-logind
 Control Group: /system.slice/systemd-logind.service
          Unit: systemd-logind.service
         Slice: system.slice
       Boot ID: 0d0e498251454a928298c0bf58c10403
    Machine ID: 76c6c4e0767844ac82fc8eead6d3f2e5
      Hostname: host
       Storage: /var/lib/systemd/coredump/core.systemd-logind.0.0d0e498251454a928298c0bf58c10403.460.1709816556000000.zst (present)
  Size on Disk: 214.7K
       Message: Process 460 (systemd-logind) of user 0 dumped core.

                Stack trace of thread 460:
                #0  0x0000735a28b26e27 epoll_wait (libc.so.6 + 0x108e27)
                #1  0x0000735a28ed0162 sd_event_wait (libsystemd-shared-255.4-2.so + 0x2d0162)
                #2  0x0000735a28ed18dc sd_event_run (libsystemd-shared-255.4-2.so + 0x2d18dc)
                #3  0x00005f908f034d6c n/a (systemd-logind + 0xad6c)
                #4  0x0000735a28a43cd0 n/a (libc.so.6 + 0x25cd0)
                #5  0x0000735a28a43d8a __libc_start_main (libc.so.6 + 0x25d8a)
                #6  0x00005f908f035ae5 n/a (systemd-logind + 0xbae5)
                ELF object binary architecture: AMD x86-64

GNU gdb (GDB) 14.2
[...]
Type "apropos word" to search for commands related to "word"...

Reading symbols from /usr/lib/systemd/systemd-logind...
(No debugging symbols found in /usr/lib/systemd/systemd-logind)

warning: Can't open file /usr/lib/liblzma.so.5.6.0 during file-backed mapping note processing

warning: Can't open file /usr/lib/libkmod.so.2.4.1 during file-backed mapping note processing
[New LWP 460]

warning: .dynamic section for "/usr/lib/libkmod.so.2" is not at the expected address (wrong library or version mismatch?)

warning: .dynamic section for "/usr/lib/libaudit.so.1" is not at the expected address (wrong library or version mismatch?)
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Core was generated by `/usr/lib/systemd/systemd-logind'.
Program terminated with signal SIGABRT, Aborted.
#0  0x0000735a28b26e27 in epoll_wait () from /usr/lib/libc.so.6

(gdb) bt

#0  0x0000735a28b26e27 in epoll_wait () from /usr/lib/libc.so.6
#1  0x0000735a28ed0162 in sd_event_wait () from /usr/lib/systemd/libsystemd-shared-255.4-2.so
#2  0x0000735a28ed18dc in sd_event_run () from /usr/lib/systemd/libsystemd-shared-255.4-2.so
#3  0x00005f908f034d6c in ?? ()
#4  0x0000735a28a43cd0 in ?? () from /usr/lib/libc.so.6
#5  0x0000735a28a43d8a in __libc_start_main () from /usr/lib/libc.so.6
#6  0x00005f908f035ae5 in ?? ()

Last edited by user11 (2024-03-17 17:25:08)

Offline

#13 2024-03-18 18:33:51

seth
Member
Registered: 2012-09-03
Posts: 58,291

Re: Internet, sometimes, not working after sleep.

https://github.com/systemd/systemd/issues/23032 (semi-related)
What happens if you edit the systemd-logind.service and simply disable that ("WatchdogSec=0")?
a) does logind still abort (hopefully not)
b) your network survives the S3?
c) other symptoms that might hint at the cause of the watchdog timeout?

Offline

#14 2024-03-18 21:27:14

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

What happens if you edit the systemd-logind.service and simply disable that ("WatchdogSec=0")?

Nothing different is happening, the logind didn't abort, so the network still lives; I would need to wait to see if it aborts in the next days or if the internet dies.

How should I proceed now?

Offline

#15 2024-03-18 22:43:00

seth
Member
Registered: 2012-09-03
Posts: 58,291

Re: Internet, sometimes, not working after sleep.

Wait and see - the watchdog is either some false positive (I'm still betting on sth. related to the system time) or something™ else will flare up (because something would have to stall it for 3+ minutes)

If not and if you really can't spot any system time issue (which might be transient and very short only, though) you'd have to file a bug against systemd.
Even iff you don't have a reliable RTC, the watchdogs probably should™ account for that and stay down for a moment after an S3 to give the system a chance to sync the time.
Speaking of which, you could try to S3 w/o any network access and see whether that results in a time shift.

Offline

#16 2024-03-28 17:40:01

user11
Member
Registered: 2023-10-19
Posts: 58

Re: Internet, sometimes, not working after sleep.

Something distinct happened today.
I used "WatchdogSec=0" for about 1 week 2 days, nothing out of the ordinary happened.
I decided to switch it back to the default value (remove the overlaping file in "/etc/systemd/system/")

Today the following happened:
1 - After opening my lid, I realized my bluetooth mouse didn't work.
2 - "bluetoothctl" is giving me "No default controller available".
3 - Checked "systemctl status bluetooth", but nothing seems to indicates the problem.
4 - After "systemctl restart bluetooth", my mouse worked again (thus bluetooth worked again).
5 - Here is my journalctl: https://0x0.st/XskJ.txt

I set "WatchdogSec=0" again to see if anything of the sort happens.

you could try to S3 w/o any network access and see whether that results in a time shift

I'll test it now.

edit: I disabled network connection, put the laptop to sleep, waited till S3, resumed in, used "sudo hwclock" and "date", no time shift.

Last edited by user11 (2024-03-28 19:43:50)

Offline

#17 2024-03-28 23:05:02

seth
Member
Registered: 2012-09-03
Posts: 58,291

Offline

Board footer

Powered by FluxBB