You are not logged in.
- Topics: Active | Unanswered
#1 2009-01-06 14:15:40
- deadspider187
- Member
- Registered: 2008-02-04
- Posts: 35
GMA 945 issues [Solved]
I've been trying to get DRI working for about two months now. I have an EEE PC 1000HA, which I know has issues with GEM being in the driver and not the kernel, but now that 2.6.28 is out, it's still not working!
I've read several forums, and haven't found a single solution that works. Previously on Gentoo, I could downgrade Xorg, Intel drivers, mesa, etc. and get 3D working again as a workaround, but the one topic on these forums that I found that suggested this did not work. I am willing to try git drivers, downgrading packages, etc. Whatever works!
xorg.conf:
Section "ServerLayout"
Identifier "ArchLinux"
Screen 0 "Screen0"
InputDevice "keyboard"
InputDevice "mouse"
InputDevice "synaptics"
EndSection
Section "Files"
#RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "GLcore"
Load "glx"
# Load "record"
Load "dri"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "freetype"
Load "synaptics"
Load "kbd"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "BlankTime" "5"
Option "AIGLX" "true"
EndSection
Section "InputDevice"
Identifier "keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "synaptics"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "PalmDetect" "1"
Option "SHMConfig" "true"
Option "SendCoreEvents" "yes"
Option "RBCornerButton" "0"
Option "RTCornerButtom" "0"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "AccelFactor" "0.0320"
Option "MaxSpeed" "0.72"
Option "MinSpeed" "0.6"
Option "Emulate3Buttons" "true"
Option "TouchPadOff" "0"
Option "LBCornerButton" "2"
Option "LeftEdge" "60"
Option "RightEdge" "1070"
Option "TopEdge" "90"
Option "BottomEdge" "680"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1"
Option "HorizScrollDelta" "20"
Option "LockedDrags" "1"
Option "CoastingSpeed" "0.13"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "8" # 8=Top Left Corner
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "ASUS"
ModelName "eeePC 901"
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +VSync # 60 Hz
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "External"
ModelName "VGA"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "AccelMethod" "EXA"
Option "MigrationHeuristic" "greedy"
Option "DRI" "true"
Option "RenderAccel" "true"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 8
Virtual 2048 2048
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Virtual 2048 2048
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Virtual 2048 2048
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2048 2048
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionLet me know if you need any further information.
Last edited by deadspider187 (2009-01-08 17:00:20)
1090T|HD4250|2GB|500GB|Arch x64
Ci7 2.66GHZ|HD5850|6GB|4x500GB|Win 7
Offline
#2 2009-01-06 15:54:00
- lilsirecho
- Veteran
- Registered: 2003-10-24
- Posts: 5,000
Re: GMA 945 issues [Solved]
Perhaps xorg.conf
Prediction...This year will be a very odd year!
Hard work does not kill people but why risk it: Charlie Mccarthy
A man is not complete until he is married..then..he is finished.
When ALL is lost, what can be found? Even bytes get lonely for a little bit! X-ray confirms Iam spineless!
Offline
#3 2009-01-06 16:39:58
- Svlad Cjelli
- Member
- From: dusk till dawn
- Registered: 2008-10-21
- Posts: 99
Re: GMA 945 issues [Solved]
did you try it without any xorg.conf?
Offline
#4 2009-01-06 19:03:03
- deadspider187
- Member
- Registered: 2008-02-04
- Posts: 35
Re: GMA 945 issues [Solved]
lilsirecho wrote:
Perhaps xorg.conf
What does this mean? I just provided my xorg.conf, are you suggesting it's wrong or I didn't provide it (which I did)? This isn't really helpful.
did you try it without any xorg.conf?
Thanks for the suggestion, X works just the same as it does with my config, still no DRI.
Here my glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.2
OpenGL shading language version string: 1.10
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_half_float_pixel, GL_ARB_imaging, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_pixel_buffer_object,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shadow, GL_ARB_shadow_ambient,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_convolution,
GL_EXT_copy_texture, GL_EXT_depth_bounds_test, GL_EXT_draw_range_elements,
GL_EXT_framebuffer_object, GL_EXT_framebuffer_blit, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_histogram, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object,
GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB,
GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_APPLE_vertex_array_object,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATI_fragment_shader,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_program_debug,
GL_MESA_resize_buffers, GL_MESA_texture_array, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_fragment_program,
GL_NV_light_max_exponent, GL_NV_point_sprite, GL_NV_texture_rectangle,
GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1,
GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGI_texture_color_table, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
3 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x7a 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
32 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x7b 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x7c 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x7d 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x7e 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x7f 0 tc 0 32 0 r . . 8 8 8 8 0 0 8 0 0 0 0 0 0 None
0x80 0 tc 0 32 0 r . . 8 8 8 8 0 0 8 16 16 16 16 0 0 Slow
0x81 0 tc 0 32 0 r y . 8 8 8 8 0 0 8 0 0 0 0 0 0 None
0x82 0 tc 0 32 0 r y . 8 8 8 8 0 0 8 16 16 16 16 0 0 Slow
0x83 0 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x84 0 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x85 0 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x86 0 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x87 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x89 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8a 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x8b 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x8c 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x8e 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x8f 0 dc 0 32 0 r . . 8 8 8 8 0 0 8 0 0 0 0 0 0 None
0x90 0 dc 0 32 0 r . . 8 8 8 8 0 0 8 16 16 16 16 0 0 Slow
0x91 0 dc 0 32 0 r y . 8 8 8 8 0 0 8 0 0 0 0 0 0 None
0x92 0 dc 0 32 0 r y . 8 8 8 8 0 0 8 16 16 16 16 0 0 Slow
0x93 0 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x94 0 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x95 0 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x96 0 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x97 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x99 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9a 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 SlowEven though it says DRI is working, it just isn't. Tuxracer plays at less then 1 fps, compiz fails to work, glxgears reports between 78-105 fps (this is NOT my refresh rate, so no vsync issue there).
1090T|HD4250|2GB|500GB|Arch x64
Ci7 2.66GHZ|HD5850|6GB|4x500GB|Win 7
Offline
#5 2009-01-07 13:42:47
- kokoko3k
- Member
- Registered: 2008-11-14
- Posts: 2,420
Re: GMA 945 issues [Solved]
what about reinstall 2.3.2-1 intel video drivers?
You'll have to find an outdated mirror and downgrade other packages too.
Here's the log of my downgrade:
[2008-11-23 18:55] removed synaptics (0.14.6.99-2)
[2008-11-23 18:55] installed xf86-input-synaptics (0.99.1-1)
[2008-12-09 18:57] removed xf86-video-intel (2.4.3-1)
[2008-12-09 18:58] upgraded intel-dri (7.2-1 -> 7.0.3-1)
[2008-12-09 18:59] removed intel-dri (7.0.3-1)
[2008-12-09 19:01] upgraded xorg-server (1.5.3-3 -> 1.4.2-2)
[2008-12-09 19:02] installed intel-dri (7.0.3-1)
[2008-12-09 19:02] installed xf86-video-intel (2.3.2-1)
[2008-12-09 19:02] upgraded libdrm (2.3.1-2 -> 2.3.1-1)
[2008-12-09 19:03] upgraded libgl (7.2-1 -> 7.0.3-2)
Hope this will help.
Personally i stay FAR away from new intel drivers, as they not only have several issues with 3d performance, but hard tearing on xvideo extension with textured adaptor, older drivers had this too, but at least overlay surfaces to get a smooth video playback were stable.
New drivers are very like to crash my system when using overlay.
Last edited by kokoko3k (2009-01-07 14:11:49)
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline
#6 2009-01-07 14:33:45
- deadspider187
- Member
- Registered: 2008-02-04
- Posts: 35
Re: GMA 945 issues [Solved]
kokoko3k wrote:
what about reinstall 2.3.2-1 intel video drivers?
You'll have to find an outdated mirror and downgrade other packages too.
Here's the log of my downgrade:
[2008-11-23 18:55] removed synaptics (0.14.6.99-2)
[2008-11-23 18:55] installed xf86-input-synaptics (0.99.1-1)
[2008-12-09 18:57] removed xf86-video-intel (2.4.3-1)
[2008-12-09 18:58] upgraded intel-dri (7.2-1 -> 7.0.3-1)
[2008-12-09 18:59] removed intel-dri (7.0.3-1)
[2008-12-09 19:01] upgraded xorg-server (1.5.3-3 -> 1.4.2-2)
[2008-12-09 19:02] installed intel-dri (7.0.3-1)
[2008-12-09 19:02] installed xf86-video-intel (2.3.2-1)
[2008-12-09 19:02] upgraded libdrm (2.3.1-2 -> 2.3.1-1)
[2008-12-09 19:03] upgraded libgl (7.2-1 -> 7.0.3-2)Hope this will help.
Personally i stay FAR away from new intel drivers, as they not only have several issues with 3d performance, but hard tearing on xvideo extension with textured adaptor, older drivers had this too, but at least overlay surfaces to get a smooth video playback were stable.
New drivers are very like to crash my system when using overlay.
I feel like this would work if the new versions of libdrm and xf86-video-intel were in the repository, what's the hold up?
Thanks, I am willing to give this a shot. Any suggestions for an outdated mirror?
Xorg.0.log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux invidia 2.6.27-zen3eee #1 SMP PREEMPT Thu Oct 30 12:59:39 CET 2008 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 7 09:29:28 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "ArchLinux"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "keyboard"
(**) |-->Input Device "mouse"
(**) |-->Input Device "synaptics"
(**) Option "AllowMouseOpenFail"
(**) Option "BlankTime" "5"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling keyboard
(WW) Disabling mouse
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7f00000/0, 0xd0000000/0, 0xf7ec0000/0, I/O @ 0x0000dc00/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7f80000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(**) AIGLX enabled
(**) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "UXA"
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF7F00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
(II) intel(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync (49.7 kHz)
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1024x600
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x83e
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (430, 270) mm
(**) intel(0): DPI set to (99, 158)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 489216 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1956860 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(II) EXA(0): Offscreen pixmap area of 20643840 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00800000-0x00ffffff: front buffer (6720 kB) X tiled
(II) intel(0): 0x01000000-0x023affff: exa offscreen (20160 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00000010, display A pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane B is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(WW) intel(0): Option "RenderAccel" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) Synaptics touchpad driver version 0.99.3
(--) synaptics auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(II) synaptics: x-axis range 8 - 1144
(II) synaptics: y-axis range 8 - 760
(II) synaptics: pressure range 0 - 255
(II) synaptics: finger width range 0 - 0
(II) synaptics: buttons: left right middle double triple
(**) Option "SHMConfig" "true"
(**) Option "LeftEdge" "60"
(**) Option "RightEdge" "1070"
(**) Option "TopEdge" "90"
(**) Option "BottomEdge" "680"
(**) Option "HorizScrollDelta" "20"
(**) Option "VertTwoFingerScroll" "1"
(**) Option "HorizTwoFingerScroll" "1"
(**) Option "TouchpadOff" "0"
(**) Option "LockedDrags" "1"
(**) Option "RBCornerButton" "0"
(**) Option "LBCornerButton" "2"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "CircularScrolling" "1"
(**) Option "CircScrollTrigger" "8"
(**) Option "PalmDetect" "1"
(--) synaptics touchpad found
(**) Option "SendCoreEvents" "yes"
(**) synaptics: always reports core events
(II) evaluating device (synaptics)
(II) XINPUT: Adding extended input device "synaptics" (type: TOUCHPAD)
(--) synaptics touchpad found
[config/dbus] couldn't take over org.x.config: org.freedesktop.DBus.Error.AccessDenied (Connection ":1.126" is not allowed to own the service "org.x.config.display0" due to security policies in the configuration file)
(II) config/hal: Adding input device Logitech USB Receiver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event9"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Logitech USB Receiver: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Logitech USB Receiver: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Logitech USB Receiver: xkb_layout: "us"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event8"
(II) Logitech USB Receiver: Found 16 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) config/hal: Adding input device Dell Dell USB Keyboard Hub
(**) Dell Dell USB Keyboard Hub: always reports core events
(**) Dell Dell USB Keyboard Hub: Device: "/dev/input/event14"
(II) Dell Dell USB Keyboard Hub: Found keys
(II) Dell Dell USB Keyboard Hub: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Dell Dell USB Keyboard Hub: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Dell Dell USB Keyboard Hub: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Dell Dell USB Keyboard Hub: xkb_layout: "us"
(II) config/hal: Adding input device Dell Dell USB Keyboard Hub
(**) Dell Dell USB Keyboard Hub: always reports core events
(**) Dell Dell USB Keyboard Hub: Device: "/dev/input/event13"
(II) Dell Dell USB Keyboard Hub: Found keys
(II) Dell Dell USB Keyboard Hub: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Dell Dell USB Keyboard Hub: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Dell Dell USB Keyboard Hub: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Dell Dell USB Keyboard Hub: xkb_layout: "us"
(II) config/hal: Adding input device Dell Dell USB Optical Mouse
(**) Dell Dell USB Optical Mouse: always reports core events
(**) Dell Dell USB Optical Mouse: Device: "/dev/input/event12"
(II) Dell Dell USB Optical Mouse: Found 3 mouse buttons
(II) Dell Dell USB Optical Mouse: Found x and y relative axes
(II) Dell Dell USB Optical Mouse: Configuring as mouse
(**) Dell Dell USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Dell Dell USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Dell Dell USB Optical Mouse" (type: MOUSE)
(II) config/hal: Adding input device OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: always reports core events
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Device: "/dev/input/event11"
(II) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Found 8 mouse buttons
(II) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Found x and y relative axes
(II) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Found keys
(II) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Configuring as mouse
(II) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Configuring as keyboard
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: YAxisMapping: buttons 4 and 5
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: xkb_layout: "us"
(II) config/hal: Adding input device OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: always reports core events
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Device: "/dev/input/event10"
(II) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Found keys
(II) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: Configuring as keyboard
(II) XINPUT: Adding extended input device "OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) OCT Inc. PocketKVM (2PORT) OCT KVM(2)-USB to PS2 1.03: xkb_layout: "us"
(II) config/hal: Adding input device ETPS/2 Elantech Touchpad
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event6"
(II) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
(II) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
(II) ETPS/2 Elantech Touchpad: pressure range 0 - 255
(II) ETPS/2 Elantech Touchpad: finger width range 0 - 0
(II) ETPS/2 Elantech Touchpad: buttons: left right middle double triple
(**) Option "SHMConfig" "on"
(**) Option "VertTwoFingerScroll" "1"
(**) Option "HorizTwoFingerScroll" "1"
(WW) Option "LockedDrags" requires a boolean value
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) ETPS/2 Elantech Touchpad touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
(WW) ETPS/2 Elantech Touchpad can't grab event device, errno=16
(--) ETPS/2 Elantech Touchpad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
AUDIT: Wed Jan 7 09:29:43 2009: 3649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=3672 )
AUDIT: Wed Jan 7 09:29:43 2009: 3649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=3673 )
AUDIT: Wed Jan 7 09:29:43 2009: 3649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=3674 )
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
(II) intel(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync (49.7 kHz)
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
(II) intel(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync (49.7 kHz)
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
(II) intel(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync (49.7 kHz)
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
(II) intel(0): Modeline "1440x900"x60.0 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync (49.7 kHz)
(II) intel(0): EDID vendor "DEL", prod id 16449
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.EDIT: I just realized I was booted in 2.6.27. I rebooted in 2.6.28, same results.
Last edited by deadspider187 (2009-01-07 14:48:34)
1090T|HD4250|2GB|500GB|Arch x64
Ci7 2.66GHZ|HD5850|6GB|4x500GB|Win 7
Offline
#7 2009-01-07 15:27:31
- kokoko3k
- Member
- Registered: 2008-11-14
- Posts: 2,420
Re: GMA 945 issues [Solved]
mirror status here: http://users.archlinux.de/~gerbra/mirrorcheck.html
The one you want is:
http://archlinux.umflint.edu/extra/os/i686/
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline
#8 2009-01-07 16:17:04
- deadspider187
- Member
- Registered: 2008-02-04
- Posts: 35
Re: GMA 945 issues [Solved]
xf86-input-synaptics is not in that reposity. I can't find the version you specified. I have everything else from the listed downgraded to the proper versions, and still not DRI. Although this time, glxinfo does see that it's not working:
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.3)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_draw_buffers, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square,
GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite,
GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x25 16 tc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x26 16 tc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x27 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x29 16 dc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x2a 16 dc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x77 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon1090T|HD4250|2GB|500GB|Arch x64
Ci7 2.66GHZ|HD5850|6GB|4x500GB|Win 7
Offline
#9 2009-01-07 18:41:57
- kokoko3k
- Member
- Registered: 2008-11-14
- Posts: 2,420
Re: GMA 945 issues [Solved]
I made a mistake with xf86-input-synaptic, the right one is synaptics.
Dunno why dri is not working, sorry.
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline
#10 2009-01-07 18:51:36
- buttons
- Member
- From: NJ, USA
- Registered: 2007-08-04
- Posts: 620
Re: GMA 945 issues [Solved]
It doesn't help you any, but my dell mini gets about 105 fps in glxgears (fullscreen) with the same chipset. However, I haven't found anything to suggest that this isn't SUPPOSED to be the case. In fact I searched quite a bit and haven't found better results.
Cthulhu For President!
Offline
#11 2009-01-08 07:44:13
- Ronin-Sage
- Member
- Registered: 2008-10-24
- Posts: 153
- Website
Re: GMA 945 issues [Solved]
Well, I had to downgrade several packages on my system(I have the Intel 945GM/950GMA), and here's what works in my case:
[*]intel-dri-7.0.3-1
[*]libgl-7.0.3-2
[*]mesa-7.0.3-3
[*]synaptics-0.14.6.99-2
[*]xf86-video-intel-2.3.2-1
[*]xorg-server-1.4.2-2
Using some rather experimental xorg.conf tweaks, I can achieve roughly 2200fps from glxgears. Did you find the guide I posted a while back by any chance?
Last edited by Ronin-Sage (2009-01-08 07:44:32)
Offline
#12 2009-01-08 14:05:25
- deadspider187
- Member
- Registered: 2008-02-04
- Posts: 35
Re: GMA 945 issues [Solved]
I made a mistake with xf86-input-synaptic, the right one is synaptics.
Dunno why dri is not working, sorry.
Thanks, I tried this and still doesn't work.
It doesn't help you any, but my dell mini gets about 105 fps in glxgears (fullscreen) with the same chipset. However, I haven't found anything to suggest that this isn't SUPPOSED to be the case. In fact I searched quite a bit and haven't found better results.This isn't right. You apparently don't have DRI enabled as well, or have VSYNC enabled.
Well, I had to downgrade several packages on my system(I have the Intel 945GM/950GMA), and here's what works in my case:
[*]intel-dri-7.0.3-1
[*]libgl-7.0.3-2
[*]mesa-7.0.3-3
[*]synaptics-0.14.6.99-2
[*]xf86-video-intel-2.3.2-1
[*]xorg-server-1.4.2-2Using some rather experimental xorg.conf tweaks, I can achieve roughly 2200fps from glxgears. Did you find the guide I posted a while back by any chance?
I checked to make sure all of the packages I had were the same as this list now that I've downgraded. They are.
Since the new Intel drivers hit AUR, I think I'm going to try the unstable/bleeding-edge packages next to see if any of these work.
1090T|HD4250|2GB|500GB|Arch x64
Ci7 2.66GHZ|HD5850|6GB|4x500GB|Win 7
Offline
#13 2009-01-08 16:13:47
- deadspider187
- Member
- Registered: 2008-02-04
- Posts: 35
Re: GMA 945 issues [Solved]
Ah ha! dmesg had the answer to this one. /dev/dri/card* was failing to populate because the drm module was loading before intel-agp. I have added intel-agp in rc.conf in front of drm and i915. I now have DRI, yay! Thanks for everyone's help. Apparently this issue dates way back to 2.6.x kernel, but it hasn't been a big issue since most distro's already load the agpgart module first.
1090T|HD4250|2GB|500GB|Arch x64
Ci7 2.66GHZ|HD5850|6GB|4x500GB|Win 7
Offline
#14 2009-01-14 21:37:19
- ishitori
- Member
- Registered: 2009-01-14
- Posts: 3
Re: GMA 945 issues [Solved]
Ronin-Sage wrote:
Using some rather experimental xorg.conf tweaks, I can achieve roughly 2200fps from glxgears. Did you find the guide I posted a while back by any chance?
can you tell plz what "experimental xorg.conf tweaks" you talk about?
after downgrading I still get max ~6oo fps (
Last edited by ishitori (2009-01-14 22:52:40)
Offline
#15 2009-01-15 01:15:43
- Ronin-Sage
- Member
- Registered: 2008-10-24
- Posts: 153
- Website
Re: GMA 945 issues [Solved]
(For my Acer 5610-4610 w/ Intel 945GM/950GMA)
WARNING: it can be buggy and I can't guarantee it'll work properly for you:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "freetype"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "vbe"
Load "synaptics"
EndSection
Section "ServerFlags"
Option "AIGLX" "true"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "acer_laptop"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
#Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 28-60
VertRefresh 43-60
Option "DPMS"
EndSection
Section "Device"
#Option "NoDDC" "true"
#Option " mtrr" "on"
#VideoRAM 131072
Option "LinearAlloc" "6144"
Option "UseFBDev" "false"
Option "XAANoOffscreenPixmaps" "true"
Identifier "Optimized Video Device"
Driver "Intel"
Option "RenderAccel" "true"
#Option "BackingStore" "true"
Option "PageFlip" "true"
Option "TripleBuffer" "true"
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
Option "DRI" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Optimized Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionOffline
#16 2009-01-15 01:56:02
- ishitori
- Member
- Registered: 2009-01-14
- Posts: 3
Re: GMA 945 issues [Solved]
thanks but your tweaks seem to have no effect on my samsung nc10.
still 600 fps with downgraded packages is much better than before )
Offline
#17 2009-02-02 17:39:32
- vienna
- Member
- Registered: 2009-02-02
- Posts: 4
Re: GMA 945 issues [Solved]
Ronin-Sage wrote:
Well, I had to downgrade several packages on my system(I have the Intel 945GM/950GMA), and here's what works in my case:
[*]intel-dri-7.0.3-1
[*]libgl-7.0.3-2
[*]mesa-7.0.3-3
[*]synaptics-0.14.6.99-2
[*]xf86-video-intel-2.3.2-1
[*]xorg-server-1.4.2-2Using some rather experimental xorg.conf tweaks, I can achieve roughly 2200fps from glxgears. Did you find the guide I posted a while back by any chance?
How do you downgrade this? I don't find a way to mask like in gentoo for instance.
Offline
#18 2009-02-05 05:21:39
- psybeer
- Member
- Registered: 2009-01-16
- Posts: 14
Re: GMA 945 issues [Solved]
Wondering same thing here, how to downgrade to previous packages.... any suggestions?
Offline
#19 2009-02-05 16:58:40
- ash
- Member
- Registered: 2008-12-17
- Posts: 134
Re: GMA 945 issues [Solved]
get the package of older version
pacman -Rd package
pacman -Ud /home/ash/desktop/package-old-i686.pkg.tar.gz
Offline
#20 2009-04-22 13:24:19
- kokoko3k
- Member
- Registered: 2008-11-14
- Posts: 2,420
Re: GMA 945 issues [Solved]
Or, if you deleted your old packages and can't find any outdated mirror,
install pacman-contrib and do a
bacman "packagename"
before upgrade it.
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline